Length | 30m-100m |
Width | 1m-9m |
Material | HDPE |
Usage | Liners |
Chemical Resistance | Excellent |
Color | Black, Green, Custom |
Elongation At Break | 700% |
Density | 0.939g/cm3 |
Application | Landfill, Mining, Pond Liner, etc. |
Thickness | 0.3mm-3.0mm |
Puncture Resistance | 240-960N |
Type | Geomembranes |
Brand Name | JianYi |
Certification | ISO9001 |
Place of Origin | China |
View Detail Information
Explore similar products
Anti Seepage HDPE Geomembrane Sheets 0.3mm-3.0mm For Mining
Landfill HDPE Geomembrane 1.5 mm For Anti Seepage Applications
High Impermeability HDPE Smooth Geomembrane Corrosion Resistant For Landfills
Custom HDPE Smooth Geomembrane For Long Lasting Waterproofing Solutions
Product Specification
Length | 30m-100m | Width | 1m-9m |
Material | HDPE | Usage | Liners |
Chemical Resistance | Excellent | Color | Black, Green, Custom |
Elongation At Break | 700% | Density | 0.939g/cm3 |
Application | Landfill, Mining, Pond Liner, etc. | Thickness | 0.3mm-3.0mm |
Puncture Resistance | 240-960N | Type | Geomembranes |
Brand Name | JianYi | Certification | ISO9001 |
Place of Origin | China | ||
High Light | 0.939g/cm3 HDPE Geomembrane ,Tailings Ponds HDPE Geomembrane ,Landfills HDPE Geomembrane |
Special High-Strength Geomembrane For Tailings Ponds And Landfills
Product Introduction
Smooth geomembrane is a kind of smooth surface geomembrane, which is mainly made of high polymer materials such as high density polyethylene (HDPE).
Product Properties
1. Excellent chemical corrosion resistance: can resist the erosion of a variety of chemical substances, including acid, alkali, salt and so on.
2. Large temperature range: can be used in a wide temperature range, with good heat resistance and cold resistance.
3. Long service life: under proper use and maintenance conditions, the service life of smooth geomembrane can be very long.
4. High tensile strength: with high tensile strength and elongation, it can withstand certain water pressure and adapt to foundation deformation.
5. Good impermeability: The use of plastic film impermeability, effectively cut off the leakage channel, often used in waterproof and impermeability projects.
Product Application
1. The impermeable layer of the landfill.
2. Waterproof layer of tailings storage yard.
3. Water conservancy projects in the channel seepage prevention, dam seepage prevention.
4. Waterproofing measures in subway engineering.
5. Seepage prevention of artificial lakes, reservoirs and other water bodies.
Product Specification
* Thickness(mm): 0.30mm~3.00mm
* Width:1m~9m
* Roll length: 30m~100m (customized request accept)
PS: Customized request accept for all above.
Geomembrane Series
Smooth HDPE Geomembrane For Landfill (GH-2S & GB/T 17643-2011)
Specification | 0.75mm | 1.00mm | 1.25mm | 1.50mm | 2.00mm | 2.50mm | 3.00mm | Remark | |
Item | |||||||||
Thickness (mm) | 0.75mm | 1.00mm | 1.25mm | 1.50mm | 2.00mm | 2.50mm | 3.00mm | ||
Density (g/c㎡,≥) | 0.939 | ||||||||
Tensile Properties | |||||||||
Yield Strength (N/mm,LD/TD) | 11 | 15 | 18 | 22 | 29 | 37 | 44 | ||
Breaking Strength (N/mm,LD/TD) | 20 | 27 | 33 | 40 | 53 | 67 | 80 | ||
Yeild Elongation Rate (%) | 12 | ||||||||
Breaking Elongation Rate (%) | 700 | ||||||||
Rectangular Tear Strength (N) | 93 | 125 | 156 | 187 | 249 | 311 | 374 | ||
Puncture Strength (N) | 240 | 320 | 400 | 480 | 640 | 800 | 960 | ||
Environmental Stress Crack Resistance (h) (A single point of incision constant tensile method) |
300 | ||||||||
Carbon Black | |||||||||
Carbon Black Content(Rang) (%) | 2.0~3.0 | ||||||||
Carbon Black Dispersion | Nine of 10 observation area should be grade 1 or grade 2, not more than 1 of grade3 | ||||||||
Oxidative Induction Time (OIT) | |||||||||
Standard OIT (min) | 100 | ||||||||
High Pressure OIT (min) | 400 | ||||||||
85℃ Oven Ageing (Minimum Average) | |||||||||
90 days after baking, the standard OIT retention(%) | 55 | ||||||||
90 days after baking, the hight pressure OIT retention(%) | 80 | ||||||||
The Anti-UV Strength | |||||||||
Ultraviolet irradiation after 1600 hours, the standard OIT retention(%) | 50 | ||||||||
Ultraviolet irradiation after 1600 hours, the high pressure OIT retention(%) | 50 | ||||||||
-70℃ The Low Temperature Embrittlement Performance mpact | Pass | ||||||||
Water Vapor Penetration Coefficient g.cm (cm2.s.Pa) | ≤1.0X10-13 | ||||||||
Dimensional Stability | ±2 |
Product Specification and Technical Index (GH-1 & GB/T 17643-2011)
Specification Item |
0.30 | 0.50 | 0.75 | 1.00 | 1.25 | 1.50 | 2.00 | 2.50 | 3.00 | Remark | |
Thickness (mm) | 0.30 | 0.50 | 0.75 | 1.00 | 1.25 | 1.50 | 2.00 | 2.50 | 3.00 | ||
Density (g/c㎡,≥) | 0.94 | ||||||||||
Tensile Yield Strength (N/mm, ≥,LD/TD) | 4 | 7 | 10 | 13 | 16 | 20 | 26 | 33 | 40 | ||
Tensile Breaking Strength (N/mm, ≥,LD/TD) | 6 | 10 | 15 | 20 | 25 | 30 | 40 | 50 | 60 | ||
Yield Elongation Rate (%,≥,LD/TD) | - | - | - | 11 | |||||||
Breaking Elongation Rate (%,≥,LD/TD) | 600 | ||||||||||
Rectangular Tear Load (N,≥,LD/TD) | 34 | 56 | 84 | 115 | 140 | 170 | 225 | 280 | 340 | ||
Puncture Strength (N,≥) | 72 | 120 | 180 | 240 | 300 | 360 | 480 | 600 | 720 | ||
Carbon Black Content (%) | 2.0~3.0 | ||||||||||
Carbon Black Dispersion | Less than 1date of Grade 3 out of 10 data, grade 4,grade 5 is not allowed |
Company Details
Business Type:
Manufacturer,Exporter,Trading Company,Seller
Year Established:
2008
Total Annual:
30000000-50000000
Employee Number:
100~150
Ecer Certification:
Verified Supplier
Founded in 2008, Jianyi group is a large production base of solid waste safe landfill and engineering protective materials in China. The company has participated in the major infrastructure construction of the country and the "the Belt and Road", the construction of emergency epidemi... Founded in 2008, Jianyi group is a large production base of solid waste safe landfill and engineering protective materials in China. The company has participated in the major infrastructure construction of the country and the "the Belt and Road", the construction of emergency epidemi...
Get in touch with us
Leave a Message, we will call you back quickly!