Changzhou Jinsanshi Mechatronics Co., Ltd
| Payment Terms | T/T, Western Union，credit card, paypal |
| Supply Ability | 30000pcs/month |
| Delivery Time | 1-15days |
| Packaging Details | cartons |
| Name | brushless dc driver |
| voltage range | 18-50VDC |
| Suitable motor | power ≤750W |
| Max speed | 20000RPM |
| rated current | 25A |
| size | 96*60*25CM |
| cooling method | Natural cooling or forced cooling |
| Operating temperature | 10-+50° |
| Ambient temperature | 90%RH |
| tremor | 5.7m/S2max |
| Brand Name | JSS-MOTOR |
| Model Number | BLD-750 |
| Certification | CE, ISO9001 |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
750W Three Phase Bldc Motor Driver Bld 750 25A 20000RPM Open Closed Loop Control
BLD 300 Brushless Dc Motor Controller 48v 440W 12-56VDC
3 Phase Bldc Motor Driver 24v 3a 20000RPM 70W Small Size
3-Phase 48V Bldc Brushless Motor Driver Controller BLD 750 18 52VDC 750W
Product Specification
| Payment Terms | T/T, Western Union，credit card, paypal | Supply Ability | 30000pcs/month |
| Delivery Time | 1-15days | Packaging Details | cartons |
| Name | brushless dc driver | voltage range | 18-50VDC |
| Suitable motor | power ≤750W | Max speed | 20000RPM |
| rated current | 25A | size | 96*60*25CM |
| cooling method | Natural cooling or forced cooling | Operating temperature | 10-+50° |
| Ambient temperature | 90%RH | tremor | 5.7m/S2max |
| Brand Name | JSS-MOTOR | Model Number | BLD-750 |
| Certification | CE, ISO9001 | Place of Origin | CHINA |
| High Light | bld 750 750w bldc motor driver 48v ，bld 750 driver ，48v 750w bldc motor controller | ||
750W Brushless Dc Motor Driver 18-52VDC Suitful Below 750W Dc Motor
Brushless dc driver:
BLD-750 Suitable for three-phase DC with power of 750W and below brushless Motor. This product is designed with advanced DSP control technology, with high torque, low noise and low vibration.Quick start and stop features. At the same time, it has PID current and speed closed loop control, over voltage, under voltage, over current, over temperature, etc. Protective function. Realized manual speed adjustment and upper computer analog voltage speed adjustment, upper computer pulse frequency speed the perfect unity of adjustment.
Features:
1, acceleration/deceleration time setting
2, motor pole number setting
3, max current output setting
4, open/closed loop control
5, motor torque holding
6, restart
7, carious aralam indications
8, internal potentiometer and RV speed control
9, external potentiometer speed control
10, external analog singal speed regulation
11, pulse frequency speed control
Electrical parameters:
| Parameter | Min | Rated | Max | Unit |
| Motor Hall angle | 120°/240° | |||
| DC input voltage | 18 | 48 | 52 | V |
| Driving current output | - | - | 25 | A |
| Applicable motor speed | - | - | 20000 | rpm |
| Hall signal voltage | - | - | 5 | V |
| Hall signal current | 20 | mA | ||
| External potentiometer | 10k | Ω | ||
Wiring diagram:
| Signal | Terminal | Content |
| Output signal | ALM | The motor or driver controls the fault signal output signal, which is normally 5V, and the level is 0V when the fault occurs. |
| SPEED | Corresponding to the operating speed of the motor, the corresponding pulse frequency is output. With SPEED-OUT, the speed of the motor can be calculated. The calculation formula is: N(rpm)=(F/P)*60/3 F:Output pulse frequency(HZ);P:Motor grade logarithm；N:Motor speed For example: motor 4 pole F=1sec/2ms=500Hz N(rpm)=(500/4)*60/3=2500 | |
| Control signal | BRK | When the BRK and COM terminals are disconnected or the high level is input, the motor brake stops. When the motor is shorted or low level, the motor runs. |
| EN | When the EN terminal is disconnected from the COM terminal or the high-level input is input, the motor stops slowly. When the short-circuit or low-level input is used, the motor runs. | |
| F/R | When the F/R terminal is short-circuited with the COM terminal or the high-level input,the motor rotates forward, and when the short-circuit or low-level input is used, the motor reverses. | |
| COM | Public port (OV reference level) | |
| SV | ①external speed potentiometer ②external analog signal input ③ pulse frequency input | |
| VCC | External potentiometer interface | |
| Hall signal | REF+ | DC brushless motor Hall signal power supply. |
| HU | DC brushless motor Hall signal HU. | |
| HV | DC brushless motor Hall signal HV. | |
| HW | DC brushless motor Hall signal HW. | |
| REF- | The DC brushless motor Hall signal is grounded. | |
| Motor connection | U | DC brushless motor U phase. |
| V | DC brushless motor V phase. | |
| W | DC brushless motor W phase. | |
| Power connection | DC- | DC power input to the negative pole. |
| DC+ | The DC power input is positive. (Voltage range DC24V-DC52V) |
Dimensions:
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company,Seller,Other
Year Established:
2012
Total Annual:
8000000-10000000
Employee Number:
>100
Ecer Certification：
Active Member
Changzhou Jinsanshi Mechatronics Co. Ltd. is located in Changzhou city, Jiangsu province, China. We are a comprehensive company which specializes in producing and researching motors and drivers. Our main products include hybrid step motor, and step driver, step servo motor and d... Changzhou Jinsanshi Mechatronics Co. Ltd. is located in Changzhou city, Jiangsu province, China. We are a comprehensive company which specializes in producing and researching motors and drivers. Our main products include hybrid step motor, and step driver, step servo motor and d...
Get in touch with us
Leave a Message, we will call you back quickly!