Wireless GPS Gas Cylinder Tracker Long Standby portable vehicle tracking device

Product Specification

Long Standby Portable wireless Vehicle Gas Cylinder GPS Tracker with big battery

Description

MT07 is a 2G asset GPS tracker with 2700Mah battery, compact size, and built-in GPS/GSM antenna, low cost, low data consumption. It’s ideally suitable for Asset tracking market.

• No wiring needed, easy for installation .
• This product is with built-in large-capacity disposable lithium-ion battery ,with ultra-low self-discharge rate and extremely wide temperature adaptability.
• Long working time: If upload one packet each 24 hours, the working time can reach up to 1095 days, no need to change battery frequently.
• Ultra low consumption, the working current can decrease to 15uA below when in sleep mode, to make sure the terminal could work longer.
• Comparing with the similar product available on the market, this terminal is with smallest size and easy for concealable installation
• Built in high sensitive light sensor with tamper proof alarm
• Multiple position mode:GPS,AGPS,LBS,WIFI

5.2.1 SIM card installation

Open the top cover of the terminal, insert the prepared SIM card into the SIM card holder, and then confirm that the SIM card button is well placed . Please make sure that the SIM card has the GPRS function available in advance and write down the SIM card number.

5.2.2 Main Unit Power On

After installing the SIM card, turn the battery switch to the ON position. When the red light starts to flash, indicating that the terminal is powered on.

5.2.3 Parameters Setting

TCP/UDP connection mode setting

For example, the client's server IP is: 119.145.40.64, port number: 8881. If it is connected by TCP, use SMS to edit: *88*1119145040064*8881*1#; if it is UDP connection, edit: *88*1119145040064*8881*0#. The terminal will reply: set ok, the setting is successful.

5.3 【Key Parameter Setting】

5.3.1 Upload Interval in Sleep Mode

Command format:HX,T#

Command description:T:wake up time,unit: minutes , default T:1440,value range :5-43200 minutes；for example,HX,1440#,set the wake up time is 1440 minutes (24 hours).

Remark: Normally we use the default setting 1440, if set shorter wakeup time, the working time of the terminal will be reduced.

5.3.2 Track Mode

Command format:ZZ,<A>[,T1,T2]#

Description: track mode

A: A=1, Enter track mode A=0 Exit track mode

T1: Set upload interval in track mode, Unit:Seconds

T2: Set the continue tracking upload interval, unit:minutes

ZZ,1,30,60# enter track model, upload interval is 30 seconds, enter sleep mode after 60 minutes

ZZ,0# Exit track mode

5.3.3 Position Mode

Command format:LBS,A#

Description

A=3:WIFI Position Priority；A=2: Switch off position function ；A=1:LBS+WIFI mode；A=0:GPS position priority；default A=3

Examples:LBS,1# enter LBS+WIFI position mode, Switch off GPS

5.3.4 Clock Mode

Command Format:WAKEUP,[T1[,T2[,T3[,T4]]]]#

Description: Set a multiple points upload parameter, maximum 4 points T1…T4, it is allowed to set 1 clocks or more clocks, maximum supports 4

Example:WAKEUP,0800,1200,1600,2000#；

They are all clock points which will wake up at 8:00,12:00,16:00,20:00 and upload terminal parameter info

Remark: After entering into tracking mode, please remember to send command to make the device exit track mode, otherwise the power will be consumed fast if upload data frequently.

Specification

FAQ

Q: Reply Time:

A: All inquiries will be answered within 24 hours.

Q: Payment Terms:
A: We accept payment by Visa Card, Master card, Alipay, Qiwi Wallet, Western Union and Bank Transfer T/T.
 

Q:Shipment Terms:

A: All orders can be shipped out within 1-3 working days normally. Once the order is shipped out, we will

send an email to you include the track number and the package photos.
 

Q:Customize and Sample:

A:OEM & ODM services are accepted if you place an order with enough quantity, and sample first is highly welcome.

Q: MOQ Limitation:

A: No MOQ limit, 1 pc for sample checking is available.