Packaging Details | plywood |
Delivery Time | 30 days |
Payment Terms | L/C,L/T |
Supply Ability | 10 set /month |
name | Flexible Cables Flexing Tester HDX1302 |
Power supply | AC 220V/ 50HZ |
Current loading of cores | 0-25A |
Voltage loading | 0-400V |
Testing speed | 0.33m/S |
type | Light Testing Equipment |
Place of Origin | China |
Brand Name | KeRang |
Certification | Calibration Certificate (Cost Additional) |
View Detail Information
Explore similar products
AC220V 50Hz Cable Testing Machine , Single Strokes Abrasion Test Machine HDX1304
Electric Wire Abrasion Test Apparatus HDX1304 Single Strokes 0.1mm Test Stroke
Static Flexibility Cable Testing Machine For Completed Flexible Cables
180° Turned Cable Testing Machine , Static Flexibility Test Machine HDX1303
Product Specification
Packaging Details | plywood | Delivery Time | 30 days |
Payment Terms | L/C,L/T | Supply Ability | 10 set /month |
name | Flexible Cables Flexing Tester HDX1302 | Power supply | AC 220V/ 50HZ |
Current loading of cores | 0-25A | Voltage loading | 0-400V |
Testing speed | 0.33m/S | type | Light Testing Equipment |
Place of Origin | China | Brand Name | KeRang |
Certification | Calibration Certificate (Cost Additional) | ||
High Light | wire testing equipment ,cable testing equipment |
Flexible Cables Flexing Tester HDX1302
Standard:IEC60245-1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 1:General requirements,IEC60245-2 clause 3.1 Figure 1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods.
Application:It is used for checking mechanical strength of completed flexible cables. This test does not apply to flexible cables with cores of nominal cross-sectional area greater than 4mm2 and cables having more than 18 cores laid up in more than two concentric layers.
Test sample:Completed flexible cables.
Feature:This cable tester consists of a carrier C (see IEC60245-2 Figure 1),a driving system for the carrier and four pulleys for each sample of cable to be tested. The carrier C supports two pulleys A and B, which are of the same diameter. The two fixed pulleys, at either end of the apparatus, may be of a different diameter from pulleys A and B, but all four pulleys shall be so arranged that the sample is horizontal between them. The carrier makes cycles (forward and backward movements) over a distance of 1 m at an approximately constant speed of 0,33m/s between each reversal of the direction of movement. A sample of flexible cable about 5 m long shall be stretched over the pulleys, each end being loaded with a weight. The mass of this weight and the diameter of pulleys A and B are given in following table.
Parameters:
Power supply | AC 220V/ 50HZ |
Current loading of cores | 0-25A |
Voltage loading | 0-400V |
Testing speed | 0.33m/S |
Testing distance | 1000±20mm |
Suitable cores | 2-18 |
Nominal cross-sectional area | 0.2~4mm2 |
Diameter of pulleys | 60,80,120,160,200mm ( Customer optional: Standard equipped 3pcs) |
Combined weights | 0.5kg, 1kg, 1.5kg, 2kg, 2.5kg, 3kg, 3.5kg, 4kg, 6kg, 7.5kg, 8kg |
Fault testing | Current interruption, short circuit between conductors, test and short circuit between the pulley. |
Company Details
Business Type:
Manufacturer
Year Established:
2018
Employee Number:
50~80
Ecer Certification:
Active Member
Shanghai kerang technology co., ltd is located in Shanghai City, China, and was established in 2018.It is a company specializing in the field of automation technology: technology development, technology transfer, technical consultation and technical service; installation, design, commissioning and m... Shanghai kerang technology co., ltd is located in Shanghai City, China, and was established in 2018.It is a company specializing in the field of automation technology: technology development, technology transfer, technical consultation and technical service; installation, design, commissioning and m...
Get in touch with us
Leave a Message, we will call you back quickly!