Gts Global Testing Services Automotive Vehicle Parts Testing Authentication

Product Specification

GLOBAL UNITED TECHNOLOGY SERVICER CO., LTD

GTS global testing third party certification laboratory professional vehicle drive quality testing

Automotive materials and parts

Provide various kinds of automotive materials and parts inspection certification

Automobile is an electromechanical hybrid system composed of tens of thousands of parts. Auto parts inspection can help auto manufacturers and parts manufacturers get detailed reports on the quality of parts, so as to improve the performance of parts.Testing covers environmental reliability testing of auto parts,Electrical performance test, functional test, EMC test,Material testing, green environmental testing and chemical compliance services.

Product range

Electric vehicle drive reliability test specification, including climate (environment) test (including high and low temperature storage test, high and low temperature operation test, damp heat storage and operation test, temperature cycling test, hot and cold impact test, high and low temperature limit test, the IP protection test, salt spray test) and mechanical (environment) test (including vibration and drop test). The standard reliability test method of electric vehicle driver is suitable for the testing and type test of electric vehicle drive controller in the development stage.

Test standard:

Gbt18488.1-2006 Electric vehicles and their controllers, Part 1: Technical conditions
Gbt18488.2-2006 Electric vehicles and their controllers -- Part 2: Test methods
Is016750-2006 Road vehicles: Environmental conditions and tests for electrical and electronic equipment
Is020653-2006 Protection grade for road vehicles, protection of electrical equipment against foreign objects, water and contact QCT_413-2002 Basic technical conditions for automotive electrical equipment
Environmental testing of electrical and electronic products -- Part 2 Test methods -- Test A: Low temperature
Environmental testing of electrical and electronic products -- Part 2 Test methods -- Test B: high temperature
Gb-t2423.03-2006 Environmental testing for electrical and electronic products Part 2 test methods Test Cb: constant damp heat test GB-T2423.04-2008 Environmental testing for electrical and electronic products Part 2 test methods test Db alternating damp heat for 12h+ 12 h cycle)
Environmental testing of electrical and electronic products -- Part 2 test methods -- Ka salt spray test
Environmental testing -- Part 2: Test methods -- Test Kb: Salt spray, alternating (sodium chloride solution)

Gbt2423.37-2006 Electrical and electronic products environmental testing -- Part 2: test methods -- sand test GB-T2423.34-2012 Environmental testing -- Part 2: Test methods: Test ZAD: temperature and humidity combined cycle test GBT2423.56-2006 electrical and electronic products environmental testing -- Part 2: Test Method Test F: wideband random vibration(digital control) and guideline tests.

Auto parts testing projects are mainly composed of metal parts testing projects and polymer parts testing projects.
Main test items of auto metal parts are:
1. Mechanical performance test: tensile test, bending test, hardness test, impact test, etc.;
2. Composition analysis: qualitative and quantitative composition analysis, trace element analysis, etc.;
3. Structure analysis: metallographic analysis, nondestructive testing, coating analysis, etc.;
4. Dimension measurement: coordinate measurement, projector measurement, precision caliper measurement, etc.

The main testing items of automotive polymer components include:

1. Physical performance test: tensile test (including normal temperature and high and low temperature), bending test (including normal temperature and high and low temperature), impact test (including normal temperature and high and low temperature), hardness, fog, tearing strength, etc.;
2. Thermal performance test: glass transition temperature, melting index, Veka temperature softening point, low temperature embrittlement temperature, melting point, thermal expansion coefficient, thermal conductivity coefficient, etc.;
3 rubber and plastic electrical performance test: surface resistance, dielectric constant, dielectric loss, dielectric strength, volume resistivity, voltage resistance, breakdown voltage, etc.;
4. Combustion performance test: vertical combustion test, horizontal combustion test, 45° Angle combustion test, FFVSS 302, ISO 3975 and other standards;
5. Qualitative analysis of material composition: Fourier infrared spectroscopy, etc.

Routine test items
1, safety project:
Input current test, label to wipe test, energy level test, SELV test, current limiting circuit testing (LCC), limited power test (LPS), grounding continuity test, temperature and humidity (tide) test, drop, impact and other mechanical stress tests, the ball pressure test and normal temperature test, contact voltage, electric current test, insulation test voltage, abnormal test, yuan A fault testing, etc.
2, the EMC test project:
Conduction, radiation, harmonic, voltage fluctuation and flicker, electrostatic, RS, EFT, surge, CS, power frequency magnetic field, such as voltage sag.

Environmental reliability Testing
High and low temperature resistance test, heat and humidity resistance, high and low temperature impact, high and low temperature alternating, mechanical vibration, mechanical impact, low pressure (vacuum) test, IP grade, dustproof water release test, gas corrosion (single/multiple), salt spray corrosion test (neutral, acid, compound), etc.
Class specific tests
Battery charging and discharging test, impact test, impact test, drop test, ROhs testing, REACH, halogen detection, temperature and humidity environment test, failure analysis, components selection, pressure test, light aging test, sand and dust test, get wet in the rain test, vibration test, high speed test, mechanical shock test, biological environment test, salt spray test and reliable integrated environment Sex test, simulated packaging and transportation test, gas corrosion test, slice test, etc.
Energy efficiency test
Energy saving testing, energy efficiency testing
Electrical performance testing
Operating voltage, operating current, speed range, power, conductivity, dielectric constant, dielectric loss, field strength (breakdown voltage), etc
 

2. Certification services
CCC, CQC, CQM, CB, CE, GS, EMF, ErP, UL, ETL, FCC, CEC, DOE, SAA, RCM
We are committed to the testing and international certification of information technology, audio and video, home appliances, lamps, wireless communications, power tools and machinery, electronic instruments, medical instruments and other types of products. We have obtained the qualification recognition of UL, Intertek, CSA, MET, TUV-RH, TUV-SUD, SGS, NEMKO, FCC, IC and many other international certification bodies. We can provide customers with professional and authoritative one-stop testing and certification services.
The test report issued by Global Zhongyi has legal effect and can be used in scenarios such as the entry of supermarkets, product appeals, anti-malicious rights protection, and auctions (appeals and auctions must meet Party A's testing requirements).