Chengli Special Co., Ltd.
| Payment Terms | T/T, L/C |
| Supply Ability | 200unit/year |
| Delivery Time | 20days |
| Rotation Angle | 360 All Rotation |
| Crane Boom Type | Straight Telescopic Crane, Knuckle Crane |
| Tyre Number | 6 Tyres And 1 Spare Tyre |
| Engine Brand | Yuchai, 180HP |
| Installation space | 1150(mm) |
| Cargo Material | Q235 Carbon Steel |
| Wheelbase/No.of axle | 5800+1350 mm |
| Cargo Thickness | Side 2mm, Bottom 3mm |
| Crane Capacity | 6.3ton, 8ton, 10ton, 12ton, 14ton, 16ton, Etc |
| Dimension | 6100*2300*550(mm) |
| Material | Q235 carbon steel |
| Recommented power | 30(kw) |
| Brand Name | Dongfeng |
| Model Number | CLW5076BPS |
| Place of Origin | suizhou hubei |
| Certification | ISO, CCC,SGS,BV |
View Detail Information
Explore similar products
850-1150mm Installation Space Truck Mounted Crane with Straight 4-Arm Telescopic
DF 3 Persons Seat Truck Mounted Crane with RHD Drive Type and 6 Tyres
5tons/5000kgs Max. Lifting Load DongFeng Mounted Crane Truck For Precise Lifting
2023 3 Tons Mini Straight Telescopic Crane Truck Mounted Crane Max Speed 90 Km/H
Product Specification
| Payment Terms | T/T, L/C | Supply Ability | 200unit/year |
| Delivery Time | 20days | Rotation Angle | 360 All Rotation |
| Crane Boom Type | Straight Telescopic Crane, Knuckle Crane | Tyre Number | 6 Tyres And 1 Spare Tyre |
| Engine Brand | Yuchai, 180HP | Installation space | 1150(mm) |
| Cargo Material | Q235 Carbon Steel | Wheelbase/No.of axle | 5800+1350 mm |
| Cargo Thickness | Side 2mm, Bottom 3mm | Crane Capacity | 6.3ton, 8ton, 10ton, 12ton, 14ton, 16ton, Etc |
| Dimension | 6100*2300*550(mm) | Material | Q235 carbon steel |
| Recommented power | 30(kw) | Brand Name | Dongfeng |
| Model Number | CLW5076BPS | Place of Origin | suizhou hubei |
| Certification | ISO, CCC,SGS,BV | ||
| High Light | 6x4 Boom Truck Mounted Crane ，Straight Telescopic Truck Mounted Crane ，180HP Dongfeng Truck Crane | ||
Operation rules of crane
Before operating the crane, read the crane operation manual carefully and strictly follow the crane operation process. The crane operation mainly includes two steps: pre-operation and on-site operation.
I. Precautions before operation
1. Before using the crane, it is necessary to ensure that the support leg cylinder is fully opened and locked, the support mould hail leg cylinder is on the ground and the car cannot be suspended, and all wheels of the car must be on the ground;
2. Before connecting the force extractor, check whether the control handle is in the middle position. If the handle is not in the middle position, restore it to the middle position;
3. Check whether the stop valve on the hydraulic tank is open, if it is not opened, be sure to open it, and check the amount of oil in the tank, the oil level must not be higher or lower than the maximum or minimum mark;
4. Ensure that the car has enough fuel to avoid power interruption during the working process, and check whether the battery pack is normal to ensure that it can start at any time in the event of power interruption;
5. Before using the crane, check whether the safety device of the crane can work normally
;
6. Check the entire power pipeline, and there can be no oil leakage or pressure loss.
2. Operation process using steps
1. Observe the operating environment of XCMG truck crane, select the appropriate Angle for lifting operation, ensure that there is enough space for the left and right legs to be fully opened, and stop the car in a suitable position away from the goods according to the weight of the goods;
2. Start the car, hang up the force extractor, make the force extractor in working state, the specific operation is to step on the clutch, put the transmission handle in the neutral position, start the car, observe the pressure value, 0.5-.06Mpa, pull out the manual air valve of the force extractor, slowly release the clutch, at this time the clutch is in working state;
3. After the completion of the inspection before the operation of the crane, the crane can be used to carry out the operation of the supporting leg and the lifting arm;
4. Pull the selection valve to the leg position on the sign, perform leg operation, open the movable leg locking device, extend the left and right horizontal leg and left and right vertical leg oil cylinder according to the corresponding mark of the operating rod, and ensure that the leg is fully extended to support the crane;
5. After the leg cylinder supports the crane, the selected valve is pulled to the crane position on the sign, and the hoisting operation is carried out by the crane.
| Technical Parameter | Value |
|---|---|
| Overall dimensions | 12000×2550×3750 mm |
| Vehicle name | 14ton Boom Crane Truck |
| GVW./Kerb Wt. | 25000 kg |
| Fuel Type | Diesel |
| Cargo Material | Q235 Carbon Steel |
| Cargo Thickness | Side 2mm, Bottom 3mm |
| Max speed | 90Km/h |
| Boom Type | Straight 4-Arm Telescopic Boom |
| Tyre Specification | 8.25R20 |
| Crane Boom Type | Straight Telescopic Crane, Knuckle Crane |
| Telescopic Boom Truck Mounted Crane | Truck Mounted Mobile Crane |
|---|---|
| Truck mounted crane with hydraulic boom | - |
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
2004
Total Annual:
400 million-500 million
Employee Number:
8000~9000
Ecer Certification：
Site Member
Chengli Special Automobile Co., Ltd., located in Suizhou city, hubei province, central China, is one of the largest manufacturers authorized by National Ministry of Industry and Information for production of 800 types of special purpose trucks and export Center of Trucks and Spare parts identif... Chengli Special Automobile Co., Ltd., located in Suizhou city, hubei province, central China, is one of the largest manufacturers authorized by National Ministry of Industry and Information for production of 800 types of special purpose trucks and export Center of Trucks and Spare parts identif...
Get in touch with us
Leave a Message, we will call you back quickly!