Expandable Rechargeable Red 2.2Ah Signal Flashlight For Road Safety

Product Specification

Expandable Rechargeable Red 2.2Ah Signal Flashlight For Road Safety

Expandable Rechargeable LED Red Directional Light For Road Safety

Application:

for railway, shipping, traffic management and special dangerous places and other scenes for mobile or fixed signal indications, warning signs, orientation indications and signal communication.

Features:

1. Design of humanized handle
2. Beautiful appearance
3. The size can be selected according to the demand
4. Lighting and stroboscopic
5. aluminium alloy

An on / off weatherproof switch is located outside the casing for operating.
A strong magnet is locate at the base of the lamp with one end of wire fix onto the lamp base rigidly.
Including one 110-220V charger
Life time of LED shall be over 50,000 hours.
Weight not be over 650 g
Rated voltage shall be 3.6V with rated capacity 1.2Ah
Light source current 100 mA
Double-face flashing with flash frequency be 1.5 ± 0.25HZ
The light head diameter 100mm with length 268mm (folded) and 350mm (unfolded).
Charging time 4 hours, works over 12hours

Performance characteristics:

◆ High-energy non-memory lithium battery, large capacity, low self-discharge rate, excellent charge and discharge protection circuit design, safety and environmental protection, long life.
◆ It can be used for hand-held mobile use, and it can also be used magnetically attached to the surface of a metal body or buckled on a thin wall for fixed use
◆ The light source adopts the international top brand LED light source, which can send out a long light or stroboscopic warning, signal or display direction in two opposite directions at the same time, and the maximum visible distance in one direction is 1500 meters.
◆ Good sealing, strong waterproof performance, can work normally in various harsh environments and climatic conditions in the field; the protection level is up to IP66. The shell is made of high-hardness aluminum alloy by precision CNC machining, and the surface is anodized, which can withstand strong forces. Collision and shock.
◆ Beautiful appearance. The structure is light and handy, and it can also be magnetically attached to the metal surface.

Instructions:

◆ According to the needs of on-site use, determine the fixing method of the lamp. Generally, the lamp has the following methods of use: table placement, handheld, magnetic adsorption, etc.

◆ When in use, press the switch button under the lamp cap with your finger, press the first time, the light will stay on; press the second time, the light will flash slowly; press the third time, the light will go out; cycle in turn. In any state, long press for 3 seconds and the light flashes quickly, press again and the light goes out.

◆ When charging, insert the output plug of the charger into the charging socket under the lamp head to charge. The charger has a built-in charging protection device. When the charger is connected to the power supply and not charging, the indicator light is green. When the lamp is connected to start charging, The red indicator light indicates normal charging. When the charging indicator turns green, the battery is fully charged.

◆ Charge in time after each use to ensure that the battery is always fully charged. After a charge, it can be used at any time within 6 months. If it is left unused for a long time, it should be fully charged every six months.