Mitsubishi HC-SFS102K 1KW Servo Motor Brand New Authentic HC-SFS102

Product Specification

Mitsubishi HC-SFS102K 1KW Servo Motor

Origin: Japan
Brand: Mitsubishi
Model: HC-SFS102
Power: 1 (KW)
Rated voltage: 380 (V)
Product certification: 3C
Speed response frequency: 1 (KHz)
Applicable motor: 1KW

Motor series: medium inertia, medium power.
Rated output power: 1.0kw.
Rated speed: 2000r/min.
With or without brakes: Not equipped.
Shaft end: keyway (with slot).
Protection level: IP65 (IP67) HC-SFS102K.
Features: Three modes of medium inertia, from low speed to high speed, are available for selection, suitable for different application ranges.
Application examples: conveyor machinery, robots, X-Y workbenches.
High resolution encoder 131072p/rev (17 bit).
The built-in high-resolution encoder ensures excellent performance and stability at low speeds.
All motor sizes are the same as previous products and wiring is compatible with HC-SFS102K
Motor series: medium inertia, medium power.
Rated output power: 1.5kw.
Rated speed: 2000r/min.
Equipped with brakes: included.
Shaft end: Standard (straight shaft).
Protection level: IP65 (IP67).
Features: Three modes of medium inertia, from low speed to high speed, are available for selection, suitable for different application ranges.
Application examples: conveyor machinery, robots, X-Y workbenches.
High resolution encoder 131072p/rev (17 bit) HC-SFS102K.
The built-in high-resolution encoder ensures excellent performance and stability at low speeds.
All motors have the same size as previous products and are compatible with wiring. Motor series: medium inertia, medium power.
Rated output power: 2.0kw.
Rated speed: 2000r/min motor.
Equipped with brakes: included.
Shaft end: Standard (straight shaft).
Protection level: IP65 (IP67).
Features: Three modes of medium inertia, from low speed to high speed, are available for selection, suitable for different application ranges.
Application examples: conveyor machinery, robots, X-Y workbench motor.
High resolution encoder 131072p/rev (17 bit).
The built-in high-resolution encoder ensures excellent performance and stability at low speeds.
All motors have the same size as previous products and are compatible with wiring. Motor series: ultra-low inertia, small capacity.
Use serial pair/incremental encoder. Without GB.
Shaft end: straight shaft.
The rotor inside the servo motor is a permanent magnet, and the U/V/W three-phase electricity controlled by the servo amplifier forms an electromagnetic field,
The rotor rotates under the action of this magnetic field, while the motor's built-in encoder provides feedback signals to the driver,
The driver compares the feedback value with the target value,
Adjust the angle of rotation of the rotor.
The accuracy of the servo motor depends on the resolution of the encoder. Type: HC-PQ type.
Output power: 0.05kw.
Rated speed: 3000r/min.
Electromagnetic braking: None.
Key axis: straight axis.
In terms of motors: The materials, structure, and processing technology of servo motors are much higher than those of AC motors driven by frequency converters,
That is to say, when the driver outputs a power supply with rapid changes in current, voltage, and frequency,
The servo motor can generate responsive action changes based on changes in power supply,
The response characteristics and anti overload capacity are much higher than those of AC motors driven by frequency converters,
The serious difference in motor performance is also the fundamental reason for the difference between the two HC-SFS102K.
It means that the frequency converter cannot output the power signal that changes so quickly,
But the motor itself cannot react,
So during the internal algorithm setting of frequency conversion, the corresponding overload setting HC-SFS102K was made to protect the motor.
Of course, even if the output capacity of the frequency converter is not set, it is still limited,
Some high-performance frequency converters can directly drive servo motors.

Terms:

We ships worldwide and accepts T/T and Paypal.
All items are subject to availability and passing our QA testing and
inspection.
Turnaround Time:

Standard order processing is 1-2 business days plus shipping method chosen.
Rush and off-hours service available for an additional fee.

Packaging and Handling:

Items are safely packaged in custom shipping cartons for protection.

Shipping:

We ship worldwide use UPS,FedEx, DHL or Truck Freight when meeded.
Call to use a shipping service other than the ones listed.
International Customers are responsible for all Customs fees, VAT and other
fees applied by their respective countries.

All shipments are fully insured.

Our advantage Products:

【Yaskawa】Servo Drive / Servo Motor

【Mitsubishi】Servo Drive / Servo Motor

【Honeywell】Module DCS / PLC

【Emerson】DeltaV Module / Servo Motor

【ABB】Input Output Module

【AB】Module / Touch Screen

【Rosemount】Pressure and Temperature Transmitter

【Yokogawa】Pressure Transmitter

【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive

(Modicon,SMC,SICK,NORGREN,Siemens etc.)

Linture Technology Co,. Ltd
Contact person: Vivian
E-mail: linture0319@163.com
Cellphone: +0086-18026552038
Wechat:18026552038
WhatsApp:+86 18026552038

Tag:electric servo drive,
ac servo drive,
ac servo pack