DN50 Practical Food Waste Shaft Grinder , Anti Abrasion Double Shaft Grinder

Product Specification

Macerating Food Waste / Excellent Cutting Result / Macerator / Low-on space

operating principle

• The Dual-shaft grinder is a macerating unit with a powerful intake function. Blades are mounted on the shafts of the dual shaft grinder. The solids to be macerated have to pass the blades rotating against each other.

• The different circumferential speeds of the carrier shafts create an excellent cutting result.

easy to operate

• After the inlet windows have been opened, the kitchen waste is fed into the filling hopper

• A special "tamper" is used to feed the solids to be macerated completely into the Dual-shaft grinder

• The two rotating blade blocks of the Dual-shaft grinder Ocean macerate the kitchen waste very efficiently

• The macerated kitchen waste is fed into a collection container below the dual-shaft grinder

highest level of safety

• Several safety systems ensure that the macerator operates safely.

• When the inlet windows are opened the Dual-shaft grinder Ocean switches off immediately.

• When the door to the collection container is opened the Dual-shaft grinder Ocean switches off immediately.

• When the emergency stop button is pressed the Dual-shaft grinder Ocean is switched off immediately.

easy cleaning

• By simply loosening four screws the filling hopper can be pulled forwards very easily

• The blades of the Dual-shaft grinder can be cleaned easily

Macerating Technology data:

Application data of Dual-shaft grinder:

Advantages of the Accuvon Dual-shaft grinder

· Excellent cutting result (< 25 mm)

· Discharge of kitchen waste into the sea possible

· Low-on space, compact design

· Made of stainless steel

· Easy and safe to operate

· Reliable, powerful, robust

· Ease of maintenance

Components

1 Quick-release cover

2 Axial casing protection

3 Central clamping unit

4 Spacer rings

5 Cutting blades

6 Shaft seal

7 Block casing

8 Quench and control chamber

9 Carrier gear unit and gear reducer

blade configurations

The degree to which the Accuvon Crusher cuts is determined by the choice of blade configuration, the teeth profiles, the blade widths and the flow speed.

Currently, a choice of nine different blade configurations can be selected depending on the assignment. The different circumferential speeds of the shafts create a tearing/cutting result. The use of hardened steel ensures the blades are kept sharp for longer. Defective cutting blades can be individually replaced.

Control technology

The Crusher generally runs in reverse for 5 seconds upon starting – afterwards changing to the original direction of rotation

Reversing in the event of overload (blockages or clogging): Reversing upon reaching 70% of the motor power rating (value can be freely configured via the control unit)

Alert: when reversing five times within ten minutes due to overload Counter which runs in the background to record the number of load-dependent reversals

The Accuvon control technology guarantees trouble-free operation of the Crusher.

design options

combined with a rotary lobe pump; can also be combined with other pumps

Model data sheet: