LPG CNG Automotive Gas Additives Package For Engine Oil BSD68603

Product Specification

BSD68603

Dual Fuel Engine Oil Additive Package

BSD-68603 is formulated from various advanced detergent dispersants, high-temperature ash free

antioxidants, and other main agents. The addition of low ash detergent in this product can effectively

avoid problems such as valve wear, spark plug blockage, and engine detonation caused by excessive

engine deposits. Has excellent high-temperature oxidation resistance, can resist the influence of high

temperature on oil performance of gas engines, and maintain the stable working state of the engine.

Excellent dispersibility can effectively prevent engine oil nitrification caused by exhaust NOx, avoid

the formation of sludge, effectively reduce high and low temperature deposits, and keep engine

components clean. Medium ash content formula, with acid neutralization and alkali retention ability.

Recommended Dosage (wt%)

Suitable for modulating various high output power, high boost gas engine oils using LPG and

CNG as single fuels, as well as engine oils using LPG/CNG/gasoline and LPG/CNG/diesel as dual fuels.

Recommended dosage 8.5%

Typical Inspections

Product Appearance

Packaging and acceptance
This product is packaged in standard iron drums, or in BIC ton drums or other packaging forms according

to customer needs.
Product identification, sample retention, and delivery acceptance shall be carried out in accordance with

SH/T0164 standard.

Product storage, transportation, and compounding agent blending operations and precautions
The product shall be stored, loaded and unloaded in accordance with the SH/T0164 standard, and must be

clearly labeled during transportation, storage and use to prevent mixing and cross contamination with other

petroleum products;
When adjusting oil, the maximum temperature should not exceed 75 ℃;
Long term storage temperature should not exceed 50 ℃.
Single dose and composite product shelf life: 24 months (at ambient temperature). After opening and using,

pay attention to sealed storage.

Health and Safety
The products in this manual are non flammable, non explosive, and non corrosive, and are similar to general

petroleum products in terms of safety, environmental protection, and use.
Avoid prolonged or repeated contact with the skin during use, prevent accidental ingestion, and keep away

from children.
Wear protective gloves when using, and the operator does not need to take special safety precautions. Once

it splashes into the eyes or skin, rinse thoroughly with plenty of water.
Store the product in a cool, dry, and well ventilated place, away from sources of fire. Heat source.
Waste packaging materials, oil liquids, and waste residues should be handed over to qualified units for recycling

and disposal, and are prohibited from being discharged into water bodies or soil.
For other health and safety information, please refer to the Product Safety Data Sheet (MSDS).

Packaging and Storage

200L metal drum packaging, stored in a dry, clean and ventilated warehouse, storage temperature

for a long time not more than 45 ℃.This product is not flammable, explosive and non-corrosive.

It is equivalent to general petroleum products in terms of safety, environmental protection and use.

For application, avoid contact with strong oxidizer.Rinse clean with soapy water when touching the skin.