Motor 110kw Speed 120m/Min Metal Wire Drawing Machine Fast Speed

Product Specification

Motor 110kw Speed 120m / Min Cold Rolling Steel Wire Drawing Machine
 
 
Introduction of Cold Rolling Steel Wire Drawing Machine:
 
1. The reducer adopts the international reducer, which has large torque, low noise and strong durability.
2. The double-side reel is coated with cemented carbide or wear-resistant material.
3. Adopting the most advanced frequency conversion or electromagnetic technology in the world, it can save 40-60% of electricity, the lowest power consumption per ton is 8-10 degrees, the line speed can reach 90-230 meters per minute, and the production efficiency is improved by more than 40%. Protection of power transmission and transformation systems and electrical equipment is not damaged, which can greatly extend the service life of the machine.
4. Rolling the shell body is cast with 45# pure steel, never cracking (Note: other manufacturers cast iron casting). The rolling mill turbine structure is integrated into one, and it is cast in 45# pure steel. It has no components, large pulling force, wear resistance, continuous teeth and durability.
5. Bracket with cast steel adjustable bracket.
 
Features of Cold rolling Steel Wire Drawing Machine:
 
When diameter is less than 10mm, the speed can reach 180m/min.
When wire diameter is 12MM, speed can reach 120 meters/minute.
 
A set of 10mm and 12mm roller can be made three slots for three diameters, with one slot life of 1300-1500T. It can be repaired 3-4 times, and each time after repairing, it can continue roll 1300- 1500T. Then the output of one set of roller is about 6000T * 3 tanks = 18,000 tons of life. If the wire diameter is smaller, the roller can be made four slots.
 
Through the cold rolling of the ordinary hot-rolled coil garden rebar (Q235) and induction tempering to achieve "high-ductility cold-rolled ribbed rebar", CRB600H, CRB650H, and CRB800H rebars can be produced, so that the elongation rate of the cold-rolled ribbed rebar is greatly increased. Improve the use of cold rolled ribbed steel.
 
1. This device adopts PLC touch screen numerical control system to make the operation easier.
2. The production line adopts the most advanced international frequency conversion and servo technology or independent frequency conversion control technology, and it effectively protects the power transmission system and equipment from damage. It maximizes the service life of the machine. It can save electricity 30-40%, the maximum line speed can reach 190 meters, increase production efficiency by more than 40%.
3. We adopt self-developed reducer as the national patented product, which is the fastest speed in China, simplifies the structure of the production line, and makes the equipment more reasonable and compact. (The speed reducer between the main reducer and the main rolling mill is omitted and the deceleration is reduced. Due to the long transmission distance of the machine and many problems connecting the flanges, it effectively improves the transmission efficiency by more than 30%, and improves the stability of the equipment by more than 60%. It effectively improves the production efficiency of the equipment.
 
Production flow:
 
Wire pay-off --- Rust remover ---Scaling and reducing wire machine --- Wire milling machine --- Wire coiling machine --- Finished product rack
 
Technical Parameters of Cold Rolling Steel Wire Drawing Machine:
 

 
Photos of Cold Rolling Steel Wire Drawing Machine: