Wide Use Waste Enameled/Armoured/Electrical Copper Wire Recycling Machine

Product Specification

Wide Use Waste Enameled/Armoured/Electrical Copper Wire Recycling Machine

The copper cable wire granuating machine separates plastic or rubber sheath and copper core, followed by cutting, crushing and separating, to thoroughly separate the copper and plastic so as to recycle them.
Recycled copper from wires can maintain original quality of copper by this machine, while the plastic can also be recycled, it can bring a big economic benefit.

Features of Enamelled copper wire recycling machine:
1. Compact structure, beautiful appearance, reasonable layout, easy installation;
2. Using PLC control system, intelligent operation, so that equipment even feed.
3. Crusher with roller crushing system, slow speed, large capacity, low noise, simple operation.
4. Crushing separation Dust removal equipment in the form of a combination of flat, easy to move and transport, but also increase the equipment is not flexible.
5. Equipment separation rate of up to 99.9%.
6. Recycling system can re-grinding semi-finished products to ensure that metal and non-metallic products completely separated.
7. The dust removal device can control the dust spill, so the dust removal rate is up to 99%.

Cable Recycling Machine Specifications:

Scrap Copper Cable Wire Granulator Working procedure :
When directly put into the machine,used cable is cut into granules first,during this process,copper and plastic is separated but mixed together,then the granules are sent to vibration device for separation,through wind blow and vibration,the copper and plastic are separated,then pure copper comes out from one side and pure plastic comes out from the other side,we collect the separated pure copper and plastic at last.

Cable recycling plant Main Components :

1.First crusher(double shaft crusher)
it needs the operator to put the waste wires into machine. Although this step must be operated manually, it has the features like easy to operate and high output.

2.conveyor:
it moves the waste wire from first crusher to second shredder.

3.Second shredder
it is a device which is used for crushing the 2~3cm wire from first crusher. This machine can crush the foreign body on external surface and separate the external rubber with copper completely. Additionally, the filtering network fixed at the bottom of machine is used for controlling the processing speed and output for different wires, and it is suitable for processing the cable from thinner one like hair to thicker one like power cable when it change the filter network. The pulverizing chamber can be operated by oil pressure system, what is more, it is easier to repair and change the blade.

4.Blower
move the crushed materials from second shredder to separator by wind wave and pressure.

5.Separator
as a core part, it is used to separate the copper and external rubber, though the structure is complex, it is easy to operate.

6.Dust collector
this device is used for collecting the dust produced in sorter through blower, there are 12 filtration woven belts whose material is imported diffusing tissue which can recycle the dust effectively, and so guarantee the cleanliness of the air of surrounding environment .

7.PLC controller
as a control device, it is used for adjusting all the machines and equipped with emergency stop and timing function. The working principle is using the PLC to control each part of the machine with strong controllability.