Industrial Hydraulic Alligator Machinery For Scrap Metal Cutting

Product Specification

Industrial Hydraulic Alligator Machinery For Scrap Metal Cutting

TF series of hydraulic alligator shears are applied in recycling companies, automobile dismantling plants, smelting & casting industry to cold-shear section steel and metallic structural parts, to produce acceptable furnace charges.

- hydraulic alligator shear is mainly used in the field of scrap metal processing, abandoned car dismantlement and casting &smelting.

- hydraulic driven, compact structure, low noise, stable operation, strong cutting press and flexible
control.

- Single & continual cutting can be transferred very easily.

- Stone bolt is not needed for installation.

Features of alligator shear:
1. Hydraulic drive,simple operation& easy maintenance.
2. Options for different force & blade length.
3. No footing bolts needed , diesel engine optional for power.

Description of metal alligator shear machine:
1.This metal cutter equipment is mainly used in the waste material recycling and processing industry. The small and medium-sized steel mills cut the cold state of scrap metal such as round steel, square steel, channel steel, angle steel, I-beam, steel plate and steel pipe.
2. This metal shearing equipment is hydraulically driven. Compared with the mechanical transmission shearing machine, it has small volume, light weight, low inertia, low noise, smooth operation, safe operation and easy to achieve overload protection.
3. This metal cutting machine has manual and automatic functions. The operation control is convenient and simple, and the scissors mouth can be cut and stopped at any position during the working process. According to the size of the material to be cut, the size of the cutting port can be arbitrarily controlled to achieve relatively high work efficiency.
4.The hydraulic cutting equipment has reasonable technical parameters, wide application range and low energy consumption. It is widely used in scrap metal recycling and metal cutting of small and medium-sized steel making plants to provide high-quality furnace materials for smelting.

Safety operation rules of alligator shearing machine:
1. crocodile scrap metal shearing machine should be operated by the designated persons. Others can not be used arbitrarily without training.
2. before driving, check whether the parts are normal and whether the fasteners are solid.
3. unannealed steel, cast iron, soft metal parts, too thin pieces, work pieces of less than 100 millimeters in length, and work pieces that exceed the length of scissors are prohibited from shearing.
4. when operating, the body is not allowed to approach the transmission part and knife edge of the equipment, and the safety of the surrounding personnel should be paid attention to, so as to prevent the material from rising and hurting people. When cutting, the material should be cut near the edge of the knife as far as possible.
5. When cutting short material, hand-held work piece is prohibited. The clamp should be used.
6. when the scrap metal shearing machine operate, the operator shall not leave the post without authorization. When the work is completed or the post is temporarily left, the power supply should be cut off. At the same time, the machine should not be repaired or touched by hand, and the hand or foot is strictly prohibited to press the material in the material box.
7. The lubricating parts of crocodile scrap metal shearing machine should be lubricated at least once per shift according to the requirements.

Specifications of crocodile shears: