Caber Ladder Cable Tray Production Line With Punching Press Or Hydraulic

Product Specification

Caber Ladder Cable Tray Production Line With Punching Press Or Hydraulic Punching

Main feature

Cable tray roll forming machine production line including the decoiler, guide device, straighten rollers, main roll forming machine, hydraulic system, PLC control system and ran-out tables. Our cable tray roll forming machine line with the computer control system. Just need to program in the computer the piece and length you need, then the roll forming machine produces it automatically. The machine is easy to operate, and operate stably.

Working flow

Uncoiling---Leveling---Storage---Feeding---Punching and Cutting---Roll forming---Output table
 

Technical parameters

1. Suitable Plate Material: 

Material thickness: 0.8-1.5mm

Raw material: Galvanized steel and black steel sheets

2. Working Speed: 4-6 m / min

3. Forming Steps: 18 stations

4. Material of Roller: Gcr15, Quench HRC58-62 Plated Chrome

5. Material of Shaft: 45# Advanced Steel (Diameter: *90mm), thermal refining

6. Driven System: Chain drive, shafts diameter 100mm

7. Main Power with Reducer: 22KW WH Chinese Famous

8. Cutting: Hydraulic Cutting Cr12mov

9. Material of Cutting Knife: Cr12Mov, Quench HRC58-62

10. Hydraulic Station Power: 11KW (Chinese Famous Brand)

11. The whole machine is controlled by industry computer PLC.

12. PLC: Panasonic, Japan

13. Touch Screen Omron, Japan

14. Electric parts--Schneider

15. Adjust the height by the motors and the rails, controlled by the PLC

Main components

Machine pic

Product application

Description of Cable Tray Industry Forming Machines

The perforated cable tray roll forming machine line is high performance production line for manufacture cable tray profile with slotted holes for supporting electric wiring in commercial and industrial construction. The cable tray which was produced by machine usually made from middle gauge steel thickness from 0.8~2.0mm.

The perforated cable tray roll forming machine successfully integrated hydraulic punching device or high speed press machine for radiation holes on cable tray. Also, the telescope shaft is available to rapid size changeover without toll change. Pre-cut or post cut can both equipped for cut off finished product.

Our service

Designing:

After order confirmation, we start to design the machine, such as the basement, structure, rollers, shafts, power, cutting device, programs and so on.

Making:

The main parts, like rollers and shafts are produced by ourselves. We have several high-precision CNC lathe and other kinds of new machine tools, so that the quality and precision can be controlled.

Assembling:

The machines are assembled by technicians with years of experience, which can help workers improve the production efficiency and machine’s quality.

Testing:

Raw material of different specifications are prepared for testing. And during test, long enough material is used. Because if the material is not long enough, some defects can not be exposed.

Delivery:

Machine will be fixed inside container by steel wire, in order to make sure it won’t move during transportation and avoid any kinds of damage of machine and container.

Our Advantages

> Can roll form ventilated cable trays cabble ladder cable trays from 100mm to 300mm width in one machine

> Automatic adjust the gap between the rollers for each dimension

> High precision punching holes and slots by 80 Tons high speed and high precision power press

> Low burr cutting and exact accuracy of cutting length

> All electric and hydraulic elements are selected from international famous brand