Changzhou Vic-Tech Motor Technology Co., Ltd.
| Payment Terms | L/C, T/T |
| Supply Ability | 100000/month |
| Delivery Time | 15 days |
| Packaging Details | Anti-static plastic bags, pack the products one by one, and then put them in the carton. Bulk products are placed in blister boxes, covered with anti-static film |
| aperture size | 8 mm |
| Connector Type | FPC |
| Motor type | 8mm stepper motor |
| Glass type | blue glass T=0.21 |
| Driving mode | 2-2phase and micro step |
| IRIS type | dual drives |
| Zoom motor | 8mm stepper with photo-transistor |
| Focus motor | 8mm stepper with photo-transistor |
| Thermal Protection | Thermistor |
| Infrared cut | IR-CUT engine assembly |
| Brand Name | V-motor |
| Model Number | VIRIS107-13 |
| Certification | RoHS |
| Place of Origin | China |
View Detail Information
Explore similar products
Dual Drive Automatic IRIS ir cut Linear Stepper Motor With IR CUT
IRIS Focusing Control DSLR Camera Stepper Motor 2 Phases With FPC
RoHS IRIS ir cut Zoom Focus Control Linear Stepper Motor For Digital Single Lens
Dual Drives IRIS ir cut Motorized Lens IR Cut For Camera Lenses
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 100000/month |
| Delivery Time | 15 days | Packaging Details | Anti-static plastic bags, pack the products one by one, and then put them in the carton. Bulk products are placed in blister boxes, covered with anti-static film |
| aperture size | 8 mm | Connector Type | FPC |
| Motor type | 8mm stepper motor | Glass type | blue glass T=0.21 |
| Driving mode | 2-2phase and micro step | IRIS type | dual drives |
| Zoom motor | 8mm stepper with photo-transistor | Focus motor | 8mm stepper with photo-transistor |
| Thermal Protection | Thermistor | Infrared cut | IR-CUT engine assembly |
| Brand Name | V-motor | Model Number | VIRIS107-13 |
| Certification | RoHS | Place of Origin | China |
| High Light | Optical Instruments IRIS ir cut ，IRIS ir cut Motor ，8mm Stepper Motor With IRIS | ||
IRIS detects light intensity through sensors inside the camera. Based on calculations, the system determines how much the aperture needs to be opened. This system controls the engine in the IRIS lens to dynamically and precisely control the aperture size. This can achieve the best photo effect.
This product is a dual-drive integrated (IRIS & IR-CUT) IRIS: two blades, one blade is blue glass, the other blade is AR glass, they are connected with IR-cut through the carrier, which can realize different filter modes. The engine is connected via FPC and Hall sensors, which can dynamically and accurately adjust the aperture size.
P-IRIS controls the aperture size dynamically and precisely by controlling the stepper motors in the P-IRIS lens. Its main task with DC-IRIS is to continuously adjust the aperture size. The main task of P-IRIS is to set the best aperture position, which is convenient to use most of the center of the lens and the part with the best effect. In addition, the optical error of this position is very large. To improve image quality. P-IrIS requires the use of gain and exposure time to manage small changes in light to further optimize image quality, maintaining the optimal aperture position for as long as possible. If, when the ability to adjust gain and exposure time is exceeded, P-IRIS will adjust the iris to a different position. This product is a dual-drive integrated (IRIS & IR-CUT) IRIS: two blades, FPC connection (including HALL) IR-CUT: one switch board, one blue glass, one AR glass, FPC connection.
1) Camera
2) Optical instruments
3) Precision medical devices
4) Automatic door locks
Other precise control application
| Model No. | VIRIS107-13 motor |
| Motor type | IRIS ir cut |
| Phase No. | 2 phases |
| Step angle | 18 degrees |
| Phase resistance | 81 Ohms/phase |
| Excitation method | 2-2 bipolar drive |
| Rated voltage | 5 - 12 V DC |
| Lead screw type | M2P0.4 |
| Stroke | 21mm |
| Pull-out thrust | Over 1.8 g.cm at 960PPS |
| Pull-in torque | Over 1.6g.cm at 960PPS |
IRIS working principle:
Product display:
1. Q: What is IR-CUT?
A: IR-CUT is simply understood as the "glasses" of CMOS, including "glasses" and "glasses remover", "glasses" is a filter, "glasses remover" is the mechanical structure of IR-CUT.
In general, the lens has two pieces of glass and a bracket, one is used to filter infrared light during the day, and the other is used for full light transmission at night. The two lenses are controlled by an IR-CUT motor (or other type of engine), and they work in turns. During the day, an infrared filter is used to prevent the image from being skewed. At night, full transparency is used to increase sensitivity. IR=Infrared=Infrared
CUT = filter, subtract
2. Q: When to use IR-CUT?
Answer: IPC network cameras generally have high requirements for images. During the day, the image is required to be unbiased. At night, the infrared light has a good night vision effect, and IR-CUT is required.
3. Question: What are the special requirements for using IR-CUT?
A: When using IR-CUT with infrared light, a synchronization signal must be output from the light board to the CMOS board to "tell" the CMOS board whether the current infrared light is on or off. Required for all CMOS with IR lamps with IR-CUT.
Company Details
Business Type:
Manufacturer
Year Established:
2011
Total Annual:
3000000-5000000
Employee Number:
80~100
Ecer Certification：
Verified Supplier
Changzhou Vic-Tech Motor Technology Co.,Ltd( follows,we only call company) was founded in year 2011, the company mainly develops, manufactures and sells micro stepper motors, micro gearboxes, micro slider motor, micro linear motor and other products The company is located in the Yangtz... Changzhou Vic-Tech Motor Technology Co.,Ltd( follows,we only call company) was founded in year 2011, the company mainly develops, manufactures and sells micro stepper motors, micro gearboxes, micro slider motor, micro linear motor and other products The company is located in the Yangtz...
Get in touch with us
Leave a Message, we will call you back quickly!