Suzhou Hongjinli Gas Equipment Co., Ltd.
| Name | Adsorption Air Dryer |
| dew point of compressed air | -40℃ |
| Brand Name | Hongjinli |
View Detail Information
Explore similar products
compressed Adsorption Air Dryer
refrigerated and adsorption type air dryer Compressed air treatment Hongjinli
Desiccant Heatless Adsorption Dryers
Blast thermal adsorption type air dryer Compressed air treatment Hongjinli
Product Specification
| Name | Adsorption Air Dryer | dew point of compressed air | -40℃ |
| Brand Name | Hongjinli | ||
| High Light | Adsorption dryer ，Modular Adsorption Dryers ，Compressed air dryers | ||
Adsorption Air Dryer
| heatless/micro heat (LH) regenerative adsorption dryer technical parameters | ||||||
| model | air treatment(m3/min) | Pipe diameter(mm) | Dimensions(length x width x height mm) | Heating power/power supply (micro heat) | Equipment weight (heatless Kg) | Equipment weight (micro heat Kg) |
| BX0005 | 0.8 | DN15 | 600X350X1500 | 70 | ||
| BX0010(LH) | 1.8 | DN20 | 650X450X1500 | 0.35/220 | 80 | 95 |
| BX0020(LH) | 2.8 | DN20 | 700X450X1500 | 0.5/220 | 100 | 120 |
| BX0030 (LH) | 3.8 | DN25 | 900X480X1600 | 0.75/220 | 130 | 140 |
| BX0040(LH) | 5.5 | DN40 | 1000X650X1750 | 1.25/220 | 250 | 270 |
| BX0060(LH) | 6.8 | DN40 | 1000X700X1800 | 1.5/220 | 280 | 300 |
| BX0080(LH) | 8.8 | DN50 | 1100X700X1900 | 2.0/220 | 450 | 480 |
| BX0100(LH) | 11.5 | DN50 | 1100X650X2050 | 2.5/220 | 500 | 530 |
| BX0120(LH) | 14 | DN65 | 1200X850X2200 | 3.0/380 | 550 | 580 |
| BX0150(LH) | 16 | DN65 | 1200X850X2200 | 3.75/380 | 580 | 620 |
| BX0200(LH) | 22.8 | DN80 | 1400X1000X2350 | 5.0/380 | 860 | 900 |
| BX0250(LH) | 28.5 | DN80 | 1400X1000X2500 | 6.25/380 | 1200 | 1250 |
| BX0300(LH) | 35 | DN80 | 1750X1100X2500 | 7.5/380 | 1600 | 1700 |
| BX0400(LH) | 45 | DN100 | 1700X1100X2600 | 10/380 | 1900 | 2000 |
| BX0500(LH) | 55 | DN100 | 1900X1200X2800 | 12.5/380 | 2300 | 2500 |
| BX0600(LH) | 65 | DN125 | 2000X1300X2800 | 15/380 | 2800 | 3000 |
| BX0800(LH) | 85 | DN150 | 2200X1600X2900 | 20/380 | 3400 | 3800 |
| BX1000(LH) | 105 | DN150 | 2600X1600X2960 | 25/380 | 4100 | 4500 |
| BX1200(LH) | 120 | DN200 | 3200X1600X3000 | 30/380 | 4500 | 5000 |
| BX1600(LH) | 160 | DN200 | 3800X1800X3000 | 40/380 | 6000 | 6500 |
| BX2000 (LH) | 200 | DN250 | 4200X2000X3000 | 50/380 | 7500 | 8000 |
| Note: BX0005-BX2000 models are twin-tower traditional structures; (LH) is a low-heat adsorption dryer | ||||||
2. Work flow of micro-thermal regeneration adsorption dryer
The micro-thermal regeneration adsorption dryer combines the advantages of pressure swing adsorption and temperature swing adsorption, that is, the moisture adsorbed by the adsorbent during the adsorption process relies on the thermal diffusion and low pressure of the regeneration gas (heated and dry air) during the regeneration process. It can be completely eliminated through the combined action of mechanisms.
Adsorption
The wet air enters the A drying cylinder from the lower pipe diameter through the A1 valve.
It flows through the adsorbent layer from bottom to top, and the dried air is discharged from the upper pipe system.
regeneration
A small amount of dry air (about 7%) passes through the upper duct system to regenerate the air
After the regulating valve is decompressed, it enters the heater for heating. This part of the hot air (called regeneration air) enters the B drying cylinder. The adsorbent in the B cylinder is analyzed and regenerated to restore the drying ability of the adsorbent. The regeneration gas is discharged into the atmosphere through the B2 valve and silencer of the lower piping system.
equalize pressure
After the adsorbent regeneration is completed, the B2 valve is closed, and the B drying cylinder gradually
Gradually increase the pressure to online working pressure and prepare to switch.
switch
The B1 valve of the lower pipe system is open, the A1 valve is closed, and the A2 valve is open.
The two drying cylinders A and B are switched, cylinder B enters adsorption, and cylinder A is depressurized and regenerated. The working sequence, working time and heating temperature are automatically controlled by the controller.
Company Details
Business Type:
Manufacturer,Exporter
Employee Number:
>100
Ecer Certification：
Verified Supplier
Suzhou Hong Jin Li Gas Equipment Co., Ltd. is headquartered in the Jiangnan region of rivers and lakes of Suzhou, is a company engaged in air separation nitrogen, hydrogen, oxygen and equipment research and development, manufacturing and related technology consulting services of high-tech enterprise... Suzhou Hong Jin Li Gas Equipment Co., Ltd. is headquartered in the Jiangnan region of rivers and lakes of Suzhou, is a company engaged in air separation nitrogen, hydrogen, oxygen and equipment research and development, manufacturing and related technology consulting services of high-tech enterprise...
Get in touch with us
Leave a Message, we will call you back quickly!