Product Specification

SL-3PCS KIT SET

Superior Material:Spray Guns and Cups are made of aluminium alloy, which is lightweight, ergonomic design and easy trigger pivot.

Carrying Case:A carrying case with a convenient handle is included for easy storage and transport.

Usage :Suitable to spray cars, machines, furniture, instruments, drawings, toys, crafts and small spots.

Package Content:

3 Spray Guns with Cups, 1 Locking Air Regulator with Pressure Gauge, 2 Wrenches, 2 Cleaning Brushes, 3 Filters, 3 Couplers, 3 Spray Mouths, 1 Extension Rod, 1 Extension Rod, 1 Manual.
 

Main Features

3 pcs HVLP air spray gun kit which include 3 spray guns. The first spray gun comes with a 1.0mm needle and nozzle set for finishing and touch up work, the second one comes with a 1.4mm needle and nozzle set for lighter materials such as high quality base coats and clear coats and the third one come with a 1.7mm needle and nozzle set for heavier materials such a primers, spray fillers, and upholstery adhesives.
Air inlet: 1/4" NPT

Package Content:

3 Spray guns with cups
Locking Air Regulator with Pressure Gauge
2 Wrenches
2 Cleaning Brushes
3 Filters
3 Couplers
3 Spray Mouths
1 Extension Rod
1 Manual

Selling Units:Single item

Single package size:40X40X15 cm

Single gross weight:8.0 kg

How to Select a Spray Gun Nozzle Tip Size

What Size Spray Tip Should I Use with my Spray Gun?

There are many different things to consider when selecting the appropriate size spray tip for each job. The amount of information on the subject can be overwhelming, so we at the Bottom Paint Store have done our best to make this step easier for you.

There are three main factors to consider when determining the size tip that will produce the best results.

• First, examine the coating that will be sprayed. Put simply, heavier coatings will require a larger orifice size than lighter ones. For example, primers are usually thicker than the accompanying paint so you should use a 1.7 or 1.8 mm tip to prime most surfaces. Most painters will stay in the range of 1.2 to 2.0 mm unless the paint being applied is specialized. (See chart below.)
• The next thing to consider is your project surface area. This determines the appropriate fan width that your sprayer will produce, that is, the shape in which the product will leave the gun nozzle. Airless spray guns have more control over the fan width than conventional spray guns because the coating is forced through the tip without being atomized by air. This causes the tip to have a large impact on the fan width and shape. Most boat projects consist of large surfaces and so a wide fan will increase the spray coverage and also provide the ability to spray close to the surface without too much build up. Smaller surfaces will require a small fan width to reduce overspray. This also makes it possible to spray further away from the surface without too much falloff because the fan is more focused.
• Lastly, consider the spray gun that is being used. Make sure that the spray tip you plan on using will be supported by the gun. Most spray gun manufacturers will provide this information in their product overview.

• Common Spray Tip Sizes and Their Uses
  Tip size (mm)	Commonly Used for
  0.8	Parting Films – PVA – very fine mist
  1.2	Clear Coats – super fine finishes
  1.4	All Around Tip – clears, base coat, single stage paints
  1.6	General Purpose – light to heavy viscosity materials
  1.8	Primers – will apply primer quickly
  2.2 -2.5	Gel Coats and Resins – for thick resins and not paints