Suzhou Xunshi New Material Co., Ltd
| Payment Terms | T/T |
| Supply Ability | 500kg per week |
| Delivery Time | 45 days |
| Packaging Details | Plywood case |
| Equal grade | Aremet 100 |
| Diameter range | 20-400mm |
| Product Name | Aremet100 Martensitic Steel |
| Model | A-100 |
| Brand | XUNSHI |
| Spec | AMS6532, GJB 9450-2018 |
| Brand Name | XUNSHI |
| Model Number | A-100 |
| Certification | ISO 9001:2015 |
| Place of Origin | China |
View Detail Information
Explore similar products
ASTM F1586 S31675 Nitrogen Alloyed Stainless Steel For Orthopedic Implants And
Special Stainless Steel UNS S31673 Wire Strip Rod For Surgical Implants
Martensitic Premium Melted Stainless Steel Alloy Custom 465 (S46500)
18Ni300 Martensite Stainless Steel Rod Forging Cold Rolled Strip High Strength
Product Specification
| Payment Terms | T/T | Supply Ability | 500kg per week |
| Delivery Time | 45 days | Packaging Details | Plywood case |
| Equal grade | Aremet 100 | Diameter range | 20-400mm |
| Product Name | Aremet100 Martensitic Steel | Model | A-100 |
| Brand | XUNSHI | Spec | AMS6532, GJB 9450-2018 |
| Brand Name | XUNSHI | Model Number | A-100 |
| Certification | ISO 9001:2015 | Place of Origin | China |
| High Light | Martensitic Stainless Steel Aermet 100 ，Mechanical Aermet 100 Steel ，Martensitic Aermet 100 Steel | ||
Martensitic Steel Alloy A-100 High Strength Excellent Mechanical Performance
A-100 (AerMet 100) is an ultra-high strength type of martensitic steel alloy, It has a very hard form of steel crystalline structurewas and developed in response to a need for a stronger and tougher material with superior fracture toughness and ductility. The minimum tensile strength of the alloy is 280 ksi (1930 MPa).
Due to the alloy is not a corrosion-resistant alloy, the sealing must be performed if used in a wet environment. Excellent hardness, tensile strength, and ductility make the alloy a candidate for various applications, including landing gear, armor, fasteners, actuators, ordnance, jet aircraft, engine shafts, drive axles, and structural tubes. AerMet 100 high-strength steel can be used in operating condition up to 427 °C (800 °F).
Parameters
Advantages
Decarburization
Like other carbon bearing high strength alloys, AerMet 100 alloy is subject to decarburization during hardening. Heat treatment should take place in a neutral atmosphere furnace, salt bath or vacuum. Decarburization should be determined by comparing the surface and internal hardness of a small test cube for proper response. Metallographic determination of decarburization is not recommended for this alloy.
Normalizing
AerMet 100 alloy can be normalized by heating to 1650° F (899° C) holding for one hour and air cooling to room temperature. Optimum softening for machining is obtained by following the 1650° F (899° C) normalize with a 16 hour 1250° F (677° C) overage anneal.
Annealing
AerMet 100 alloy is softened by using a 1250° F (677° C) overage anneal for 16 hours. The optimum annealed hardness of 40 HRC maximum is obtained following this anneal.
Solution Treatment
The solution treatment temperature range is 1625° F+/-25° F (885° C +/-14° C) for 1 hour. The solution treatment temperature must be monitored by a thermocouple attached to the load.
Specifications
AMS 6532,UNS K92580, GJB 9450-2018
Available forms
Forgings, rods, square rods, plate, strip, wire, welding wire, etc., with a diameter range of 20-400mm
Company Details
Business Type:
Manufacturer
Year Established:
2015
Total Annual:
1000-1200
Employee Number:
100~120
Ecer Certification：
Verified Supplier
Suzhou Xunshi New Material Co., Ltd (refered as Xunshi afterwards) is a professional supplier of high performance alloys. Our factory is specialized in manufacturing Nickel alloys & Cobalt alloys for 10+ years，with a company mission to provide a high quality, reliable source for precision... Suzhou Xunshi New Material Co., Ltd (refered as Xunshi afterwards) is a professional supplier of high performance alloys. Our factory is specialized in manufacturing Nickel alloys & Cobalt alloys for 10+ years，with a company mission to provide a high quality, reliable source for precision...
Get in touch with us
Leave a Message, we will call you back quickly!