YHCB Series High performance Gear Oil Transfer Pump Tank Truck PTO Gear Pump

MOQ： 1 set
Price： Negotiable
Get Latest Price


Payment Terms	T/T, Western Union
Supply Ability	500 sets per month
Delivery Time	2-5 working days
Packaging Details	plywood case package
Product name	gear oil transfer pump
Structure	Gear Oil Pump
Brand	Yuzhou
Fuel	electric and truck engine
Pressure	0.4-0.6mpa
Motor power	3-37 KW
Brand Name	Yuzhou
Model Number	YHCB
Certification	ISO/SGS/CE
Place of Origin	China

View Detail Information

Contact Now Ask for best deal

Get Latest Price Request a quote

Explore similar products

YCB series high performance stainless steel explosion proof gear oil pump

Get Latest Price
KCB Stainless Steel High Performance Electric Motor Drive Gear Oil transfer pump

Get Latest Price
Explosion Proof Gear Oil Transfer Pump High Efficiency 2bv Series For Industry

Get Latest Price
Self Priming High Flow Gear Pump , Portable Mini Gear Pump Customized Colour

Get Latest Price

Product Details
Company Details

Product Specification


Payment Terms	T/T, Western Union	Supply Ability	500 sets per month
Delivery Time	2-5 working days	Packaging Details	plywood case package
Product name	gear oil transfer pump	Structure	Gear Oil Pump
Brand	Yuzhou	Fuel	electric and truck engine
Pressure	0.4-0.6mpa	Motor power	3-37 KW
Brand Name	Yuzhou	Model Number	YHCB
Certification	ISO/SGS/CE	Place of Origin	China
High Light	waste oil gear pump ，rotary gear oil pump

YHCB Series High Performance Gear Oil Transfer Pump Tank Truck PTO Gear Pump

YHCB oil transfer tank truck PTO gear pump using Japan's advanced technology design and produce,its outstanding characteristic is high efficiency and energy saving.

Compared with ordinary gear pump, the amount of liquid transport, less energy consumption. ordinary gear pump capacity is 58m3/h,pressure is 2.8kg, use 18.5kw motor. But YHCB oil pump capacity 60m3/h,pressure 6kg, use 11kw motor.

YHCB oil transfer tank truck PTO gear pump mainly suitable for transferring all kinds of liquids with viscosity 5~1500cst, temperature below 100℃,not contain solid particles and non~corrosive. Such as petrol , Kerosene, diesel oil and mechanical lubricating oil. It is a kind of high efficiency and energy saving special gear pump. It has big capacity, high pressure,small volume,low noise,good self-priming performance, convenient to install and repair. It is also the ideal choice for oil tanker refitting industry and petroleum sector.

Technical parameters:

Type	Q Flow m3/h	Working Pressure Mpa	Speed rpm	Power kw
50YHCB-8	8	0.4	960	3
60YHCB-15	15	0.4	960	4
60YHCB-30	28	0.4	960	5.5
60YHCB-50	45	0.4	1430	11
65YHCB-35	35	0.6	960	7.5
76YHCB-40	40	0.6	960	7.5
80YHCB-60	60	0.6	960	11
80YHCB-80	80	0.4	960	15
100YHCB-100	100	0.4	960	22
125YHCB-150	150	0.4	960	37
150YHCB-200	200	0.4	960	55

Trouble shooting
At start-up
Check pump rotation is correct (2-3 seconds).
Check flushing liquid to seal or gland is available at the pump.
Check for alignment and a dust free coupling.

Failure phenomenon	Trouble shooting
No liquid delivered	(a) Pump not primed. (b) Suction lift too high. Check with a gauge at the pump suction (c) Wrong direction of rotation (d) Pump not rotating (failure of drive from prime mover) (e) Suction & Delivery pipes connected on wrong sides of pump
Not enough liquid delivered	(a) Air leaks in suction or through stuffing box (b) Speed too low (c) Suction lift too high, or not enough suction head (for hot liquids) (d) Foot valve too small or obstructed (e) Foot valve or end of suction pipe not immersed deeply enough (f) Piping improperly installed permitting air or gas to pocket in pump (g) Mechanical defects: Pump damaged, Pump badly worn Packing defective (h) Relief valve not seating or jammed by foreign matter. (i) Relief valve set for too low a pressure.
Pump works for a while then loses suction	(a) Leaky suction lines (b) Suction lift too high (c) Air or gases in the liquid
Pump takes too much power	(a) Speed too high (b) Liquid heavier or more viscous than we quoted for (c) Suction or discharge line obstructed (d) Mechanical defects Shaft bent Rotating element binds Stuffing boxes too tight Misalignment due to improper connection of pipe lines or driver (g) Check pressure is being measured at the pump and not some distance away from the pump thus ignoring pressure losses in piping, valves, etc. (h) Discharge pressure higher than quoted for.
Noisy pump	(a) Speed too high (b) Suction lift or viscosity too high (piping diameter too small) preventing filling of gear tooth spaces (c) Wrong direction of rotation (Note: recesses in the pump covers to prevent hydraulic noise operate only in one direction) (d) Badly supported pipes or bed-plates causing resonant vibration. Rubber mounting can help. (e) Relief valve chattering (f) Pressure too low: an increase in pressure can prevent gear noise in low pressure applications (g) Worn pump, check for wear
Excessive Gland leakage	(a) Packing hard and shafts scored (b) Pressure on pump too high or pressure relief passage blocked (c) Shaft run out excessive (d) When repacking a gland all the old packing must be removed. It is not good enough just to add extra rings as the original packing becomes compressed
Excessive wear	(a) Abrasive liquid / Contaminated liquid (b) Excessive speed (c) Misalignment (d) Excessive loading on drive shaft, axial or radial (e) Pump is running dry (f) Viscosity less than stated
Motor running hot and overheating	(a) Back pressure too great (b) Incorrect supply voltage (c) Motor phasing (d) Pump operating outside temperature range (e) Air temperature too high (f) Motor covered in dust (g) Electrical connections not correct for starting method (h) Natural ventilation blocked
Pump overheating	(a) Re-circulating small amount of liquid (b) Over tight gland (c) Running dry (d) Pump out of alignment

Company Details

Bronze Gleitlager

Bronze Sleeve Bushings

and

Graphite Plugged Bushings

from Quality China Factory



Business Type:

Manufacturer,Exporter,Seller 


Year Established:

2016 


Total Annual:

3000000-4000000


Employee Number:

120~200 


Ecer Certification：

Active Member 

Shenzhen Yuzhou Machinery Equipment Co., Ltd was established in 2019, located in Longgang district,Shenzhen City , Guangdong Province，China. Shenzhen Yuzhou Machinery Equipment Co., Ltd is a leading manufacturer which has the capability of product design & development, manufacturing,... Shenzhen Yuzhou Machinery Equipment Co., Ltd was established in 2019, located in Longgang district,Shenzhen City , Guangdong Province，China. Shenzhen Yuzhou Machinery Equipment Co., Ltd is a leading manufacturer which has the capability of product design & development, manufacturing,...

+ Read More

Reach Us
Shenzhen Yuzhou Machinery Equipment Co., Ltd
Baolong street, Longgang district, Shenzhen city, 518100，Guangdong Province, China
https://www.oiltransfer-pump.com/

Send Email

Leave a Message, we will call you back quickly!