China World Technology Medical Equipment Service Group
| Payment Terms | T/T(wire transfer), Western Union, Paypal |
| Delivery Time | 3-5 working days |
| Packaging Details | Carton |
| Product Name | PN 4032-002 Revl NONIN Avant 2120 Avant4000 Avant 9600 9700 Ni-MH Battery Pack 7.2V 4000 MAh |
| Brand | Nonin |
| Part No | 4032-002 |
| Compatible for | Avant 2120 Avant4000 Avant 9600 9700 |
| Operating Life | Minimum 12 hours of continuous operation with a fully charged battery pack |
| Storage Life | 27 days |
| Battery Recharge Time | 4 hours |
| Battery | 7.2 volt battery pack (6 cells) |
| MOQ | One piece |
| Warranty | 90 days |
| Brand Name | NONIN |
| Model Number | 4032-002 |
View Detail Information
Explore similar products
Mindray ECG Leadwires EL6802A 12-Lead Limb Cable IEC Clip PN0010-30-42903 For
TS-W-D Patient Monitor Accessories GE Ohmeda TruSignal 9 Pin Spo2 Wrap Sensor
CBL 3 Lead ECG Safety Patient Trunk Cable IEC PN M1510A Ref 989803103871 for
Battery 989805611641 REF 1076374 1058272 For V60 Ventilator New Original 14.4V
Product Specification
| Payment Terms | T/T(wire transfer), Western Union, Paypal | Delivery Time | 3-5 working days |
| Packaging Details | Carton | Product Name | PN 4032-002 Revl NONIN Avant 2120 Avant4000 Avant 9600 9700 Ni-MH Battery Pack 7.2V 4000 MAh |
| Brand | Nonin | Part No | 4032-002 |
| Compatible for | Avant 2120 Avant4000 Avant 9600 9700 | Operating Life | Minimum 12 hours of continuous operation with a fully charged battery pack |
| Storage Life | 27 days | Battery Recharge Time | 4 hours |
| Battery | 7.2 volt battery pack (6 cells) | MOQ | One piece |
| Warranty | 90 days | Brand Name | NONIN |
| Model Number | 4032-002 | ||
| High Light | PN 4032-002 Ni MH Battery Pack ，4000MAh Ni MH Battery Pack ，Ni MH Battery Pack 7.2V | ||
PN 4032-002 Revl NONIN Avant 2120 Avant4000 Avant 9600 9700 Ni-MH Battery Pack 7.2V 4000 MAh
Battery LED
A flashing yellow LED indicates that the battery is low. indicates that the battery is not installed This LED does not indicate that the device is running on battery power. New batteries must complete a charge/discharge/charge cycle before the battery LED shows its true capacity.
Warning: The battery must always be installed while the device is in operation. Although it works on AC power, the buzzer and memory will not work if you remove the battery from the device. Do not use this device without batteries.
Low Battery Alarm
Battery LED blinks in sync with Main Alarm LED.
Troubleshooting
Device will not activate
| Possible Cause | Possible Solution |
| The device has no power. | Plug in the AC power supply. |
| The battery pack is connected incorrectly. | Check the battery pack connector orientation |
| The battery pack is not charged. | Plug the device into AC power to charge the battery pack. New battery packs must complete one charge/discharge/recharge cycle before the battery LED will display actual capacity |
| The battery pack will not charge. | Contact Technical Service for repair or replacement. |
The device does not record data.
| Possible Cause | Possible Solution |
| The battery is low | Recharge the battery. |
| The battery is missing. | Contact your Technical Service. |
Battery Life
| Operating | Minimum 12 hours of continuous operation with a fully charged battery pack |
| Storage | 27 days |
| Battery Recharge Time | 4 hours |
| Battery | 7.2 volt battery pack (6 cells) |
Installing the Batteries
NOTE: New battery packs must be fully charged before use; minimum recharge time is 4 hours.
• Loosen the screws and remove the rear cover.
• Insert the battery pack as shown.
• Carefully replace the back cover and tighten the screws, do not overtighten.
• Removing the battery from the device deletes all previous SpO2 and NIBP data; it does not delete user-defined alarm limits.
Customer service
Excellent customer service is our focus to ensure that your business with us meets or exceeds your expectations every time.
All members of our company do their best to respond to any inquiries or concerns from each customer.
Let us know what you are looking for and we will let you know when we are able to obtain the medical equipment you need.
So, whether you have any questions, comments or compliments, we want to hear from you
Thank you so much for your attention .If you're interested in PN 4032-002 Revl NONIN Avant 2120 Avant4000 Avant 9600 9700 Ni-MH Battery Pack 7.2V 4000 MAh ,feel free to contact us .
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company,Seller
Year Established:
2015
Employee Number:
20~50
Ecer Certification：
Verified Supplier
China World Technology Medical Equipment Service Group is a company engaged in medical equipments/repair parts and accessories products trading company. The company was established in September 2005, has many famous enterprises at home and abroad (such as America USCO company) to establish a long-te... China World Technology Medical Equipment Service Group is a company engaged in medical equipments/repair parts and accessories products trading company. The company was established in September 2005, has many famous enterprises at home and abroad (such as America USCO company) to establish a long-te...
Get in touch with us
Leave a Message, we will call you back quickly!