Product Specification

16layer 4rd Anylayer HDI FR-4+TG180 +4000-13EP High frequency mixed pressure high speed PCB except RoHS Lead Free Contr

Brief Introduction
16layer 4rdHDI FR-4+TG180 C-Ply+Nelco 4000-13EP High frequency mixed pressure high speed PCB

High Frequency Circuit Material is glass reinforced hydrocarbon/ceramic laminates
(Not PTFE) designed for performance sensitive, high volume commercial applications. Currently
Double sided and multilayer 16layers of 3nd order HDI 6035HTC+RT6010.2LM PCB's are available at Bicheng company. Double sided
16layer 4rd Anylayer HDI FR-4+TG180 +4000-13EP High frequency mixed pressure high speed PCB with thickness 10mil (0.254mm), 20mil (0.508mm), 30mil (0.762mm) and 60mil
(1.524mm) are the bestsellers. We provide prototype runs, small batches and volume production
Services.

Printed circuit board (pcb) and PCBA product areas
Communication terminals, communication stations, electronic communications, computers, household appliances, appliances, SD cards, SG cards, mobile phones, antennas, computers, automobiles, music equipment, playback equipment, banking equipment, medical instruments, medical equipment, medical equipment, aerospace, Aviation, military, LED, OLED, OLCD power control power supply, industrial power supply, communication power supply, automotive power supply, office equipment, digital products, computers and other product applications;
Winding circuit board (fpc) and FPCA product areas
CD, hard disk, printer, fax machine, scanner, sensor, mobile phone, connector, module, walkie-talkie antenna card, high-end camera, digital, camera, laser head, CD, medical, instrumentation, drive, automotive instrumentation, medical instrument , Medical equipment, banking equipment, industrial instruments, LED strips, military industry, aviation, aerospace, national defense and other high-tech products, more than 70% of the products are exported to the Americas, Europe, Japan, Asia Pacific and other countries and regions.
Advantages
1) Excellent high frequency performance due to low dielectric tolerance and loss;
2) Excellent dimensional stability.
3) Low thermal coefficient of dielectric constant;
4) Low Z-Axis expansion;
5) Low in-plane expansion coefficient;
6) Stable electrical properties verus frequency;

Applications
1) Attenuator, Automatic gate induction;
2) LNB's for direct broadcast satellites;
3) Microstrip antenna, spread spectrum;
4) Microstrip and cellular base station antennas and power amplifiers;
5) RF identifications tags
6) Spread spectrum communications systems
7) Trunk amplifier, splitter module etc.

PCB Case: 16layers of 3nd order HDI 6035HTC+RT6010.2LM 60 mil High Frequency PCB
Immersion Gold
(PCB's are custom-made products, the picture and parameters shown are just for
Reference)

General description
this is a type of high frequency PCB built on RO4350B 4000-13EP  HDI 6035HTC+RT6010.2LM 60 for the application of LTE. It's a
2 layer RF PCB board at 1.6 mm thick. It's immersion gold finish with solder mask and
Silkscreen from Taiyo. It's fabricated per IPC 6012 Class 2 using supplied Gerber data.
Each 10 boards are packed for shipment.

Features and benefits
the temperature coefficient of dielectric constant is among the lowest of any circuit board
Material, making it ideal for temperature sensitive applications.
RO4350B exhibits a stable dielectric constant over a broad frequency range. this makes it
An ideal substrate for broadband applications.
RO4003C exhibit a stable dielectric constant over a broad frequency range. this makes it
An ideal substrate for broadband applications.
ENIG has long storage time (It can be stored for more than 1 year in vacuum bag)
Whole fabrication processes are totally controlled.
Meeting your printed circuit board needs from PCB prototyping to mass volume production.
More than 15 years' experience
High technology
Customer complaint rate: <1%

Application
Uhf radio, Acoustic detection sensors, Digital transmitter, Attenuator

Parameter and data sheet

PCB SIZE	35 x 65mm=1PCS
BOARD TYPE	High frequency PCB, RF PCB
Number of Layers	Double sided PCB
Surface Mount Components	YES
through Hole Components	YES
LAYER STACKUP	Copper ------- 35um(1oz)+PLATE
	6035HTC+RT6010.2LM 6035HTC+RT6010.2LM 60
	Copper ------- 35um(1oz)+PLATE
TECHNOLOGY
Minimum Trace and Space:	11mil/12mil
Minimum / Maximum Holes:	0.3/2.2mm
Number of Different Holes:	5
Number of Drill Holes:	184
Number of Milled Slots:	0
Number of Internal Cutouts:	0
Impedance Control	NO
BOARD MATERIAL
Glass Epoxy:	6035HTC+RT6010.2LM 60mil, Tg 288
Final foil external:	1.5oz
Final foil internal:	0oz
Final height of PCB:	1.6mm 0.16
PLATING and COATING
Surface Finish	Electroless nickel over Immersion Gold (ENIG) ( 2 micoinch over 100 microinch nickel)
Solder Mask Apply to:	Top and Bottom, 12micon Minimum.
Solder Mask Color:	Green, PSR-2000GT600D, Taiyo supplied.
Solder Mask Type:	LPSM
CONTOUR/CUTTING	Routing
MARKING
Side of Component Legend	TOP
Colour of Component Legend	White, IJR-4000 MW300, Taiyo Supplied.
Manufacturer Name or Logo:	Marked on the board in a conductor and leged FREE AREA
VIA	Plated through Hole(PTH), via tented.
FLAMIBILITY RATING	UL 94-V0 Approval MIN.
DIMENSION TOLERANCE
Outline dimension:	0.0059" (0.15mm)
Board plating:	0.0030" (0.076mm)
Drill tolerance:	0.002" (0.05mm)
TEST	100% Electrical Test prior shipment
TYPE of ARTWORK to BE SUPPLIED	Gerber RS-274-X, PCBDOC etc
SERVICE AREA	Worldwide, Globally.

Variety of PCBs

CNC Routing