Bohyar Engineering Material Technology(Suzhou)Co., Ltd
| Supply Ability | 500 Sets/Year |
| Delivery Time | 30 days |
| Packaging Details | Metal Case |
| Drive | Hydraulic |
| Item No. | TC0672 |
| Wall Thickness | 5mm-20mm |
| Operating dimension | 610x510x280(mm) |
| Installation | Vertical or Horizontal |
| Brand Name | Bohyar |
| Model Number | TC0672 |
| Certification | ISO 9001:2008, CU-TR, ISO14001:2004,OHSAS 18001:2007 |
| Place of Origin | Jiangsu China |
View Detail Information
Explore similar products
Travel Cutter, Climbing Pipe Cutting Beveling Machine, Adjustable Speed
Portable Hydraulic Climbling Pipe Cutting and Beveling Machines CE ISO Proved
Hydraulic Drive Travel Cutter Cold Cutting and beveling machine
Pipelines Travel Cutter Chain Travel Pipe Cutting And Beveling Machine
Product Specification
| Supply Ability | 500 Sets/Year | Delivery Time | 30 days |
| Packaging Details | Metal Case | Drive | Hydraulic |
| Item No. | TC0672 | Wall Thickness | 5mm-20mm |
| Operating dimension | 610x510x280(mm) | Installation | Vertical or Horizontal |
| Brand Name | Bohyar | Model Number | TC0672 |
| Certification | ISO 9001:2008, CU-TR, ISO14001:2004,OHSAS 18001:2007 | Place of Origin | Jiangsu China |
| High Light | pipe beveling equipment ，cutting beveling machine | ||
Light Weight Stainless Steel Trav L Cutter 5Mm - 20Mm Wall Thickness
Trav-L-Cutter, or "Travel Cutter," is a portable pipeline cutting, beveling and milling machine with 6in-72in capacity. This machine features atmospheric anti-corrosion package with stainless steel components and special finishes.
The Model TC0672 utilizes a powerful, sealed closed loop hydraulic drive system, includes anti-corrosion package with stainless steel components and special finishes. It is ideally suited for hostile environments or for use underwater.
■ Perfect cold cutting
It has been used in a wide range of applications, including natural gas, crude oil and radioactive environments
■ Compact & portable design
Light weight, only 10"-12"gap, less than 10 minutes to install
■ A wide range of applications
Operate in the trenches full of silt and 25 meters underwater and available for cutting and beveling in flooded trenches and underwater mud at 600 feet.
■ Good stability
Strong corrosion resistance and durable structure
Tools
|
Model |
TC0672 |
Processing Range |
6"-72"(153mm-1829mm) |
|
Drive |
Hydraulic |
Wall Thickness |
5mm-25mm |
|
Hydraulic Requirements |
15 gpm @ 1500 psi. |
Clearance |
254-305 mm (10"-12") radial, depending on pipe diameter. 20"axial(508 mm) |
|
Feed Method |
Positive, non-slip chain drive. |
Finish |
Paint |
|
Cutter Speed |
Adjustable 0-60RPM |
Installation |
Vertical or horizontal installation |
|
Operating Dimension |
610x510x280(mm) |
Operating Weight |
100kg |
|
Hydraulic Control |
Cutter on-off, feed on-off. Flow control valves which can adjust feed speed. Separate controls, providing adjustable feed and cutter speed. Forward/Reverse travel permits machine to be backed up. |
||
■ We have standard beveling tools of 30°, 37° and also can customize the tools.
■ Connect the hydraulic hose to the valve block on the Travel Cutter.
■ With the hydraulic supply turned on the machine is ready to cut the pipe. Turn the valve handle on cutter valve 90° to the right. This will make the cutter spindle motor in operation and rotate the cutter.
■ Slowly feed the rotating cutter down until it extends through the wall of the pipe by approximately 14mm(A maximum single cutting depth is 14mm and it will affect the use efficiency if exceeding 14mm) This is done by turning the feed screw in a clockwise direction. One complete turn of the feed screw lowers the cutter 4mm. Lock the cutter in position by placing the feed screw lock on the shoulder of the feed screw and lock in place with the thumb screw.
■ Turn valve handle on feed valve 45° to the right. This will operate the drive motor and make the machine travel around the pipe for a complete cut. Speed may be reduced by adjustment of the feed valve handle (close slowly until proper speed is attained). Machine is traveling too fast if wheel to right of cutter lifts off pipe or if machine is vibrating excessively.
■ When the cut is completed, stop the drive motor by turning feed valve to the left until machine stops. With the cutter still rotating release the elevating screw lock and raise the valve to the left 90°. Remove the cutter from the machine. Release the tension on the drive chain by turning the chain tension screw counter clockwise. Remove the connecting pins from the chain to uncouple it and the machine can be removed from the pipe.
Maintenance Information: Before the machine or any of its accessories is returned for maintenance, please call Bohyar Company. We will give suggestions on transportation and handover of the machine or accessories, and estimate the time and cost of corresponding maintenance.
Company Details
Business Type:
Manufacturer
Year Established:
2012
Total Annual:
3000000-5000000
Employee Number:
100~200
Ecer Certification：
Active Member
General Instruction Bohyar, headquartered in Suzhou City, Jiangsu Province, always endeavors to provide customers with a full set of solutions for industrial pipeline. After many years of research and development, Bohyar has produced a full range of online pipeline cutting and beveling equipment,... General Instruction Bohyar, headquartered in Suzhou City, Jiangsu Province, always endeavors to provide customers with a full set of solutions for industrial pipeline. After many years of research and development, Bohyar has produced a full range of online pipeline cutting and beveling equipment,...
Get in touch with us
Leave a Message, we will call you back quickly!