Double-Station Inert Gas Glove Box Ensures Water Oxygen Content ≤0.1ppm And

Remaining Configuration:

Technical Parameters:

• 1. Box
• 1.1. Box size: L x W x H =2440x 780 x 900mm.
• 1.2. Material: All stainless steel structure (SUS 304), thickness 3mm.
• 1.3. Glove mouth: diameter 220mm, hard aluminum alloy material, after anti-corrosion treatment.
• 1.4. Gloves: American PIERCAN gloves, caliber 8 inches, thickness 0.4 mm, butyl rubber material.
• 1.5. Window: Inclined design of the operating surface, using 10mm safety tempered glass, the front window and affixed with a special custom super sealing ring, using the front door open structure.
• 1.6. A certain positive and negative pressure (-12mbar to 12mbar) can be maintained during use.
• 1.7. The box is equipped with energy-saving lighting lamps and anti-reflective materials, which make the light soft and prevent visual fatigue.
• 1.8. A perforated power terminal panel (Power supply: 220V±10% 50Hz±10%) is preset in the container.
• 1.9. The box is equipped with 4 standard KF-40 interfaces for easy access to liquids, gases, signals, etc.
• 1.10. The box is provided with 2 layers of storage boards, with upper and lower height adjustment function.
• 1.11. Support: including casters, height 914mm. The caster has the functions of leveling, moving and fixing.
• 1.12. Leakage rate: ≤0.05vol%/h. According to the ISO 10648-2 standard document clearly given the indicators:
• The hourly leakage rate of the sealed box type with a controlled inert atmosphere is ≤5×.
• 2. Transition cabin
• Large transition module:
• 2.1. Shape: Cylindrical (304 stainless steel), connected to the glove box, with automatic pumping air control.
• 2.2. Size: Diameter 360mm, length 600mm large transition cabin (right operation), using gas spring type door opening mode, transition cabin with sliding tray.
• 2.3. Large transition cabin tray: stainless steel 230mm ×595mm, can move freely around the extension depth of 361mm.
• 2.4. Vacuum degree: ≤-0.1MPa(large transition chamber requires vacuum belt display), vacuum pressure gauge selected German Wika.
• Small transition chamber:
• 2.5. Shape: Cylindrical (304 stainless steel), connected to the glove box, controlled by a manual valve.
• 2.6. Size: 150mm×300mm, single open handle pressing method.
• 2.7. Vacuum degree: ≤-0.1MPa(small transition chamber requires vacuum belt display), vacuum pressure gauge selected German Wika.
• 3. Control system
• 3.1. Mode: Including self-diagnosis, power off self-start features, with pressure control and adaptive functions. Automatic control, cycle control, password protection, vacuum chamber control using LCD display. The control unit adopts German SIEMENS PLC touch screen, the operation menu is optional: Chinese/English.
• 3.2. Pressure control: Control the pressure of the box and the transition chamber at a certain set value.
• 3.3. Foot pedal: can control the pressure of the glove box, easy operation.
• 4, circulation purification system
• 4.1. Purification capacity: water, oxygen <0.1ppm.
• 4.2. Adjustment device: The whole process of PLC touch adjustment (heating, evacuation, purification, regeneration) without human monitoring.
• 4.3. Working gas: N2 or Ar (gas cycle).
• 4.5. Circulation fan: Germany Elektror imported high-speed frequency conversion fan, flow 0-80m3/h, microprocessor control, pressure tested stainless steel device.
• 4.6. Single purification column: Germany BASF deaeration material, the United States UOP high efficiency water absorption material, of which deaeration material 5kg, deaeration 60l, deaeration material 5kg, water removal 2kg.
• 4.7. Purification valve: automatic electro-pneumatic valve. Modular design.
• 4.8. Filter: High efficiency filter with HEPA standard 0.3 micron aperture filter.
• 5. Regeneration system
• It is used to reuse the purification system and activate it; Regeneration requires a mixture of N2/H2 or Ar/ H2 gases, with H2 accounting for 5-10%.
• 6. Display system
• Control unit adopts German SIEMENS PLC touch screen, operation menu: Chinese/English.
• 7. Vacuum system
• Automatic gas control plating plate; Vacuum pump selected British Edwards RV12 vacuum pump. The transition chamber can be vacuumed separately and can be controlled separately at any time. (Optional items)
•  
• Glove box selection configuration and main technical indicators
• 1. Water analyzer
• 1.1. Range: 0-1000ppm.
• 1.2. Error: ±1% ppm.
• 1.3. Environment: -10℃ -50 ℃.
• 1.4. Display: PLC control display.
• 1.5. especially for lithium battery manufacturing and metal-organic users, it can be cleaned and reused to avoid the problem of scrap after a pollution.
• 2. Oxygen analyzer
• 2.1. Range: 0-1000ppm.
• 2.2. Error: ±1% ppm.
• 2.3. Environment: -10℃ -50 ℃.
• 2.4. Display: PLC control display.
• 2.5The use of ZrO2 sensor avoids the problem that the fuel cell has a short life and cannot be exposed to the air.
• 3, solvent adsorption system
• 3.1. The effect of the agent on the purification column, the use of bypass system integrated into the glove box system, can effectively remove the solvent volatilized from the system, the media is mainly high quality and efficient activated carbon and activated alumina.
• 3.2. Volume and weight of activated carbon cylinder Kg: 14.9L/5Kg

Basic Parameter:

• 1. Net weight of glove box (Kg) : 745 Kg.
• 2. The net dimension of the glove box (mm) : length x width x height =3235 x 1040 x 1860mm.
• 3. Total power of the equipment: 0.8Kw.
• 4. The internal strip provides power Kw: 2.5 Kw.