TORICH INTERNATIONAL LIMITED
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | 60000 Ton per year |
| Delivery Time | 30-35 days |
| Packaging Details | packing in wooden boxes |
| Product name | ASTM B338 Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and heat-exchangers |
| Product Keyword | Titanium Alloy Steel Tube |
| Grade | Grade1 Grade2 Grade3 Grade7 Grade9 Grade11 |
| Application | For condensers and heat-exchangers |
| Secondary | Non-secondary |
| Section shape | Round |
| Technique | Cold Drawn and Hot Finished |
| Type | Seamless and Welded |
| Brand Name | TORICH |
| Model Number | ASTM B338 |
| Certification | ISO9001; ISO14001; TSI16949 |
| Place of Origin | ZheJiang,CHINA |
View Detail Information
Explore similar products
Copper / Copper Alloy Condenser Seamless Steel Tube 10 - 80mm OD ASTM B111
Titanium Welded Seamless Alloy Steel Pipe TA3 TA9 TA10 0.5 - 2mm Wall Thickness
Automobile High Carbon Chromium 100cr6 Bearing Tube 16MnCr5
Astmb338 Coll Roll Titanium Alloy Tube For Heat Exchangers / Condensers
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Supply Ability | 60000 Ton per year |
| Delivery Time | 30-35 days | Packaging Details | packing in wooden boxes |
| Product name | ASTM B338 Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and heat-exchangers | Product Keyword | Titanium Alloy Steel Tube |
| Grade | Grade1 Grade2 Grade3 Grade7 Grade9 Grade11 | Application | For condensers and heat-exchangers |
| Secondary | Non-secondary | Section shape | Round |
| Technique | Cold Drawn and Hot Finished | Type | Seamless and Welded |
| Brand Name | TORICH | Model Number | ASTM B338 |
| Certification | ISO9001; ISO14001; TSI16949 | Place of Origin | ZheJiang,CHINA |
| High Light | ASTM B338 Alloy Steel Pipe ，ASTM B338 titanium alloy tubes ，WT3.4mm Alloy Steel Pipe | ||
Application: For condensers and heat-exchangers
Technique: Cold Drawn and Hot-Finished
Size:
| OD | 5-420mm |
| WT | 1-50mm |
| LENGTH | Max 12000mm |
Referenced Documents:
ASTM Referenced Standards
A370 Test methods and Definitions for mechanical testing of steel products.
E8 Test methods for tension testing of metallic materials.
E29 practice for using significant digits in test data to determine conformance with specifications.
E120 Test Methods for chemical analysis of titanium and titanium alloys.
E1409 Test method for determination of oxygen in titanium and titanium alloys by the inert gas fusion technique.
E1447 test method for determination of hydrogen in titanium and titanium alloys by the inert gas fusion thermal conductivity method.
Chemical Composition:
| Element | Composition % | |||||
| Grade 1 | Grade 2 | Grade 3 | Grade 7 | Grade 9 | Grade 11 | |
| Nitrogen, max | 0.03 | 0.03 | 0.05 | 0.03 | 0.03 | 0.03 |
| Carbon, max | 0.08 | 0.08 | 0.08 | 0.08 | 0.08 | 0.08 |
| Hydrogen, max | 0.015 | 0.015 | 0.015 | 0.015 | 0.015 | 0.015 |
| Iron, max | 0.2 | 0.3 | 0.3 | 0.3 | 0.25 | 0.25 |
| Oxygen, max | 0.18 | 0.25 | 0.35 | 0.25 | 0.15 | 0.15 |
| Aluminum | … | 2.5-3.5 | 2.5-3.5 | |||
| Vanadium | … | 2.0-3.0 | 2.0-3.0 | |||
| Tin | … | |||||
| Ruthenium | … | |||||
| Palladium | … | 0.12-0.25 | ||||
| Cobalt | … | |||||
| Molybdenum | … | |||||
| Chromium | … | |||||
| Nickel | … | |||||
| Niobium | … | |||||
| Zirconium | … | |||||
| Silicon | … | |||||
| Residuals, max each | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 |
| Residuals, max total | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 |
| Titanium | balance | balance | balance | balance | balance | balance |
Mechanical proporties:
| Grade | Tensile strength, in | Yield Strength, 0.2% Offset | Elongation in 2 in. or 50mm, min, % | ||||
| Ksi | Mpa | min | max | ||||
| Ksi | Mpa | Ksi | Mpa | ||||
| 1 | 35 | 240 | 25 | 170 | 45 | 310 | 24 |
| 2 | 50 | 345 | 40 | 275 | 65 | 450 | 20 |
| 3 | 65 | 450 | 55 | 380 | 80 | 550 | 18 |
| 7 | 50 | 345 | 40 | 275 | 65 | 450 | 20 |
| 9 | 125 | 860 | 105 | 725 | … | … | 10 |
| 11 | 35 | 240 | 25 | 170 | 45 | 310 | 24 |
Tubing shall withstand, without cracking, flattening under a load applied gradually at room temperature until the distance between the load platens is not more than H in. H is calculated as SB338 standard.
For tube 3 1/2 in.(88mm) in outside diameter and smaller, and 0.134 in.(3.4mm) in wall thickness and thinner, a section of tube approximately 4 in.(102mm) in length shall withstand being flared with a tool having a 60°included angle until the tube at the mouth of the flare has been expanded in accordance with table4 the flared end shall show no cracking or rupture visible to the unaided eye. Flaring tests on larger diameter tube or tubing outside the range of standard shall be as agreed upon between the manufacturer and the purchaser.
Welded tubing shall be tested using both a nondestructive electromagnetic test and an ultrasonic test as described in standard. Seamless and welded/cold worked tubing shall be tested using an ultrasonic test as described in standard.
Welded or seamless tubing shall be tested with a hydrostatic or pneumatic test as described in standard. Other requirements details can check standard.
Product show:
Q: Are you trading company or manufacturer?
A: We are a professional steel pipes materials manufacturer.
Q: How long is your delivery time?
A: Generally it takes 7-14 days if the goods are in stock or 30-60 days if there is no stock, this mainly depends on quantity.
Q: Do you provide free samples?
A: Yes, we could offer the sample for free charge but need pay the cost of freight.
Q: What is your terms of payment?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Importer,Exporter,Trading Company,Seller
Year Established:
1997
Total Annual:
25000000-30000000
Employee Number:
100~200
Ecer Certification：
Verified Supplier
Who We are ？ -------A professional steel pipes materials inventor, manufacturer and solution provider Torich International Limited is a professional manufacturer and exporter of steel pipes materials. It is an international marketing and sales company specialized in steel tubes, which hol... Who We are ？ -------A professional steel pipes materials inventor, manufacturer and solution provider Torich International Limited is a professional manufacturer and exporter of steel pipes materials. It is an international marketing and sales company specialized in steel tubes, which hol...
Get in touch with us
Leave a Message, we will call you back quickly!