Hydraulic Metal Shear NC Hydraulic Sheet Metal Guillotine Shear With Feeding

Product Specification

Hydraulic Metal Shear NC Hydraulic Guillotine Shear Cutter Machine With Feeding

supply hydraulic guillotine shear, hydraulic shearing machine,hydraulic cutting machine, sheet press brake machine, CNC press brake,tandem press brake, bending machine

30kw plate cutting machine performace

• the hydraulic sheet cutting machine used to cut sheet metal and steel plate. Also Corner notcher and edge notching machines.
• A metal Shearing machine is used for cutting sheet metal to size out of a larger flat stock or from roll stock. The metal to be cut is held in place with hold-downs. 90° cuts are positioned by
• a squaring arm with scale on it or with a back gauge. Other angles are possible with an angle gauge. Large machines with shadow cut line will have a light that shines over a wire which projectsa thin shadow line exactly where the cut line is which is useful if you mark your metal
• the hydraulic guillotine shear with a tape measure.
• The guillotine shearing machine process can produce a shear edge burr, which can be minimized to less than
• 10% of the material thickness. This is a function of clearance between the blades, and the
• sharpness of the cutting blades. On some sheet metal shears and most plate shears, the blade
• hydrulic guillotien shear gap is adjustable for different metal thicknesses. Though they are minor, the possibility of little
• burrs and hold down marks should be considered in the forming of some end products. Machine
• capacities shown for mild steel can be 33% or so higher for most types of soft aluminum, and
• 50% lower for stainless steel. Also, common A36 steel is usually harder than mild steel and
• maynot cut as easy. Call an American Machine Tools sales engineer for more info. We are
• accreditedby the Better Business Bureau with an A+ rating.

Standard configuration for stailness steel shearing machine

Technical Data of Hydraulic Metal Shear

415V shearing Machine Feature

• It’s very popular in metalworking market for cutting metal sheets
• Various model of cutting 4-40mm thickness and 1000-9000mm length.
• Steel welded construction, vibrating aging function
• Shearing gap can be adjusted stepless at will and can do sectional cut
• Motorized back gauge and cutting number can digital readout
• Power break protection device to guarantee safety during maintenance
• Debug and goodafter-sales service

Character

• guillotine shear All steel welded structure,vibrating treatment of ageing for removal of internal stress,
• with good rigidity and stability.
• Intergrated hydraulic transmission system,with good reliability.
• Triple support rolling guide raikl to eliminate gaps of support and enhance shearing quality.
• Mechanical rear stopper with manual fine tuning,and digital indication.
• Clearance in between shearing blades adjusted by hand wheel to be quickly.
• accurate and convenient.
• Rectangular blades with four cutting edges to prolon working life,adjustable
• shearing angle to reduce deformation of the sheet.
• Upper blade holder has inward tilting struction to facilitate material feed in and also
• enhance of the work piecision.
• Function of shearing in section,function of aligning with light

Enclosed Accessory

• Front arm support, 6pieces
• Anchor bolt, 4 pieces
• Nut, some pieces
• Washer, some pieces
• Oil gun, 1 piece
• Foot pedal 1 piece
• pneumatic device  1 peice

Major Elements
 
1. CE Conformity including  Light guards
2.  Back gaueg control by the inverter and encode
3.  cutting depth and blade gap can Program on Control DTC-660
4.  control back gauge X and balde gap Z
5.  upper blade ahve two edges and bottom lade ahve four edges for change using
6.  the HRC of balde is 50-55
7. motorized driven back gauge on ball screws
8.  side front arms with scale and stooper
8. Side and rear safety guards and safety interlock switches
 

Machine picture