Witgain Technology Limited
| Payment Terms | T/T |
| Supply Ability | 100k pcs/month |
| Delivery Time | 20 days |
| Packaging Details | Vacuum bubble bag packaging |
| Layer Count | 6 Layer |
| Material: | FR4 TG>170 |
| Board Thickness | 1.2 MM |
| Solder mask colour: | Orange |
| PTH Wall Copper | 25 UM |
| Copper Thickness | 2/2/2/2/2/2 OZ |
| Brand Name | WITGAIN PCB |
| Model Number | HeavyCopperPCB0007 |
| Certification | UL |
| Place of Origin | China |
View Detail Information
Explore similar products
Power Supply Printed Circuit Board PCB 2 Layer Heavy Copper FR4 Substrate
2 OZ Heavy Copper Power Supply PCB 6 Layer FR4 TG Material
Power Supply Hdi Circuit Boards FR4 Substrate 2 Layer 3 Oz Copper PCB
Heavy Copper 4 OZ Power Supply PCB 6 Layer 25 UM PTH
Product Specification
| Payment Terms | T/T | Supply Ability | 100k pcs/month |
| Delivery Time | 20 days | Packaging Details | Vacuum bubble bag packaging |
| Layer Count | 6 Layer | Material: | FR4 TG>170 |
| Board Thickness | 1.2 MM | Solder mask colour: | Orange |
| PTH Wall Copper | 25 UM | Copper Thickness | 2/2/2/2/2/2 OZ |
| Brand Name | WITGAIN PCB | Model Number | HeavyCopperPCB0007 |
| Certification | UL | Place of Origin | China |
| High Light | Orange Solder Power Supply PCB ，6 Layer Power Supply PCB ，2 OZ Copper PCB | ||
Power Supply PCB 6 Layer Heavy Copper 2 OZ On Each Layer Orange Solder Mask
PCB Specifications:
1 The following marks should be printed from the component side: UL Logo, Material Code, Flammability Rating, Manufacturer name or symbol as indicated in UL yellow card. This should be printed with ink.
2 PCB thickness and drill hole size specified are finished sizes.
3 The tool mark for pcb if used should be a blind hole i.e no copper or mask should be present around the tool mark from either side of the pcb.
4 All holes should be concentric with the pad center by 0.02 minimum.
5 Add date code with ink on top side, preferred format YYWW(YEAR WEEK)
6 Lead free pcbs should be marked with rohs log as shown.
7 The vendor to provide material certification for ROHS compliance with every lot and packing to be identified with PB free symbol.
8 Finished board to be packed in interleaving sulfer-free paper.
9 PCB fabrication to be as per IPC-A-600 Standards latest rev.
10 Glue dot mask should be free from the copper and green mask.
11 Instead of mesh put plain copper with green masking at all ribs.
12 Masking material should be UL approved.
13 Tin plating thickness should be 1 to 50 mircons.
14 All hole including via hole copper plating thickness should be 20 microns minimum.
15 Via holes need to be filled by solder mask plug in process.
16 Entire board should be inspected for proper plating and good workmanship. Evidence of lifting, bridging, under or over etching , damaged pads or breakout will not be accepted.
17 All lettering and patterns should be legible and complete with no missing or broken lines or filled in symbols.
Company Details
Business Type:
Manufacturer
Year Established:
2007
Total Annual:
25,000,000-30,000,000
Employee Number:
200~300
Ecer Certification：
Active Member
Witgain Technology Limited was established in 2007. Factories locate in HuiZhou City and marketing locates in ShenZhen City. The total area of two factories is around 10000 square meters. We can offer 2-layer and multi-layer pcb services to our customers, highest to 24 layers and rigid-flex pcb, cer... Witgain Technology Limited was established in 2007. Factories locate in HuiZhou City and marketing locates in ShenZhen City. The total area of two factories is around 10000 square meters. We can offer 2-layer and multi-layer pcb services to our customers, highest to 24 layers and rigid-flex pcb, cer...
Get in touch with us
Leave a Message, we will call you back quickly!