Air Polyester Dust Collector Pulse Jet System For Sandblasting Processing

Product Specification

Air Pulse Jet Industrial Dust Collector For Sandblasting Processing
 
product description

Decent pulse dust collector is researched and developed for dust removal and dust collection of crusher and grinder. Pulse bag dust collector uses advanced cleaning technology, increases the ratio of substantial air into bags, dust removal efficiency can reach above 99%. Decent pulse dust collector is our sophisticated technology and efficient dust removal equipment.

Under the effect of the air fan, airflow with dust is sucked into the dust collecting chamber from the bottom or one side. Those big dust particles will go downwards because of the decreasing speed of the airflow. While, those fine dust particles, will be stopped to the outside layer of the filter bag. When compressed air blows reverse back the filter bag, the fine particles will break away from the bag and go downwards with the big particles. Finally, dust particles will be discharged outside and the purified air will be discharged upon the upper side of the cleaning chamber. Finally, it plays the role of collecting dust, air pollution prevention purposes.

 
Techinal parameters

Note:

1. The net filtration area in the table refers to the filtration area when a room is cleaned. The total weight of the equipment does not include the weight of the insulation layer.
2. The gas consumption in the table refers to the situation of centralized gas supply in the factory. If a separate air compressor is set, the gas consumption in the table is multiplied by 1.3.
 
 
working principle
 
PPC series air box pulse bag filter consists of upper box body, middle box body, lower box and ash head, ladder, platform, gas storage tank, pulse valve, dragon frame, screw conveyor, ash unloading valve, electrical control cabinet, air The press and other components are made according to standards. The wiring position of the incoming terminal is set according to the user's requirements. For the wiring terminal, see the instruction manual of the electrical controller.
Under the action of the main fan of the system, the dust-containing gas enters the pre-collection chamber of the dust collector from the dust inlet of the PPC type air box pulse bag filter. The dust-containing gas flows into the ash hopper under the impact of the baffle, and the flow rate decreases at the same time. Slow, under the action of inertia and the weight of the dust, the coarser dust particles directly fall into the ash hopper and are discharged from the ash discharging mechanism, which plays a role of pre-collection. The clean gas after passing through the filter bag enters the upper box and flows into the air outlet and is discharged.
The body of the air box pulse bag filter is divided into several box areas, and there is a lifting penalty driven by a cylinder on the side outlet pipe of each box. When the filter bag of the air box pulse bag filter works for one cycle, the ash cleaning controller will send a signal, the poppet valve of the first box room starts to close and cut off the overflow gas, and the pulse valve of the box room opens to a value greater than 0.4Mpa. Compressed air rushes into the clean air chamber to clear the dust on the filter bag; when this action is completed, the poppet valve reopens, the box re-filters, and all the dust removal actions are completed according to the above procedures one by one.
Xinchen FMQD/PPC series air box pulse bag filter can provide users with different room numbers and different bag numbers PPC32, PPC64, PPC96, PPC128 and other specifications according to the user's different cleaning field conditions. You can choose according to the following parameter table. If you need technical support, you can call Xinchen service hotline: 0317-8046444. After explaining your cleaning site conditions and needs to our professional and technical personnel, we will provide free Provide you with a safer and reasonable dust removal solution