Dongguan Haida Equipment Co.,LTD
| Packaging Details | Each set protected with resin fiber and PP film, then put into Strong wooden case with operation man |
| Delivery Time | 20 days after order confirmed |
| Payment Terms | L/C,D/A,D/P,T/T,Western Union,MoneyGram,In cash, escrow |
| Supply Ability | 300 Sets per Month Haida |
| power | Electric |
| product name | environmental testing chambers |
| Type | UV lamp aging testing chamber |
| Overall size (W×D×H) | 1340mm×530 mm×1400 mm |
| Materials | SUS#304 stainless steel |
| Temperature control | PID self - tuning temperature control mode |
| Place of Origin | Guangdong, China (Mainland) |
| Brand Name | HAIDA |
| Certification | ISO 9001:2000; ISO 9001:2008; QS-9000; ISO 14001:2004; CE, , SMC, CMC, CPA, CE,CMA,IMC |
| Model Number | HD-E802-2 |
View Detail Information
Explore similar products
Formaldehyde Testing Chamber / Climate Test Chamber High Accuracy
Automobile Environmental Test Chambers , Ozone Durable Aging Testing Chamber
Anti Corrosive Environmental Test Chambers Salt Spray Corrosion Tester
Auto Environmental Test Chambers , Carbon Steel Benchtop Drying Oven To Dry
Product Specification
| Packaging Details | Each set protected with resin fiber and PP film, then put into Strong wooden case with operation man | Delivery Time | 20 days after order confirmed |
| Payment Terms | L/C,D/A,D/P,T/T,Western Union,MoneyGram,In cash, escrow | Supply Ability | 300 Sets per Month Haida |
| power | Electric | product name | environmental testing chambers |
| Type | UV lamp aging testing chamber | Overall size (W×D×H) | 1340mm×530 mm×1400 mm |
| Materials | SUS#304 stainless steel | Temperature control | PID self - tuning temperature control mode |
| Place of Origin | Guangdong, China (Mainland) | Brand Name | HAIDA |
| Certification | ISO 9001:2000; ISO 9001:2008; QS-9000; ISO 14001:2004; CE, , SMC, CMC, CPA, CE,CMA,IMC | Model Number | HD-E802-2 |
| High Light | environmental testing equipment ，environmental testing machine | ||
304 Stainless Steel Environmental Test Chambers , Industrial UV Lamp Aging Tester
1. Product description
UV lamp aging testing chamber is applicable for the sunlight resistant test of nonmetallic materials and aging test of artificial light sources. A variety of industrial products can make the reliability test, and this product can simulate the product in the sun, rain, humidity and dew conditions, including damage caused by bleaching, color, brightness down, powder, crack, blur, brittle, intensity decreased and oxidation.
2. Technical parameters:
Accelerated Weather UV test machine
| Studio size (W×D×H) | 1140mm×400mm×500mm |
| Overall size (W×D×H) | 1340mm×530 mm×1400 mm |
| Center distance of the lamp | 70mm |
| Wavelength range | uv-a wavelength range of 315 to 400nm, the peak at about 340nm |
| Radiation intensity | within 1W/m2/340nm |
| Temperature resolution | 0.1℃ |
| Light temperature range | 50℃~70℃ / temperature tolerance is ±3℃ |
| Condensation temperature range | 40℃~60℃ / temperature tolerance of ±3℃ |
| Measuring range of blackboard thermometer | 30~80℃ / tolerance is ±1℃ |
| Temperature control mode | PID self - tuning temperature control mode |
| Humidity range | about 45%~70% r.h. |
| Water tank requirements | water depth not more than 50mm, and with an automatic water supply controller |
| Standard specimen size | 75×150mm 48pcs |
| Recommended operating environment | 5~35℃, 40%~85%R•H, 300mm away from the wall |
| Voltage | 220V±5%, single-phase three-wire, 50Hz, 10A, required 15A leakage switch |
| Lamp selection | domestic huaqiang lamp/American Atlecs lamp |
| The distance between the specimen and the nearest parallel surface of the lamp surface is about 50mm±2mm | |
3. Chamber Structure:
Accelerated Weather UV test machine
The inner bladder of the chamber is made of imported high-class stainless steel plate while the outer bladder is made of SUS 304 steel plate.
The heating mode adopts inner bladder trough type heating with its rapid temperature rise and even temperature distribution.
4. Control System:
Adopts black aluminum plate to connect temperature sensor and adopts black board temperature meter to control heating so as to ensure more stable temperature.
The radiometer probe is fixed so as to avoid the frequent installation and disassembly.
The radiation quantity adopts the special UV irradiatometer with high-precision display and measurement.
The radiation intensity is not more than 50W/m2.
The illumination and condensation can be controlled independently or alternating and circularly.
5. Test Specimen Mounting:
Accelerated Weather UV test machine
The standard test specimen holder accommodates 2 panels 75×150mm. The test panels are actual the side wall of the chamber. To properly seal the chamber, it is important to have every panel holder filled with specimens or blank panels and to have panel holders in place.
6. Design criteria:
Accelerated Weather UV test machine
(1) ASTM D4587: Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
(2) ASTM D4799: Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
(3) ISO 4892-1: Plastics – Methods of Exposure to Laboratory Light Sources – Part 1: General guidance
(4) ISO 4892-3: Plastics - Methods of Exposure to Laboratory Light Sources - Part 3: Fluorescent UV Lamps
(5) ASTM D4329: Standard Practice for Fluorescent UV Exposure of Plastics
(6) AATCC TM186: Weather Resistance: UV Light and Moisture Exposure
(7) ASTM D5208: Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
(8) IEC 61345: UV Test for Photovaltalic (PV) Modules
UV Accelerated Weathering Tester_pdf.pdf
Company Details
Business Type:
Manufacturer
Year Established:
2003
Total Annual:
5000000-7000000
Employee Number:
80~100
Ecer Certification：
Verified Supplier
Haida established in 2004 in Dongguan City, where is the “silicon valley” of world manufacturing industry. It is a certified national high-tech enterprise engaged in design, research and development, production, sales, calibration and after-sale service of test equipment, such as pap... Haida established in 2004 in Dongguan City, where is the “silicon valley” of world manufacturing industry. It is a certified national high-tech enterprise engaged in design, research and development, production, sales, calibration and after-sale service of test equipment, such as pap...
Get in touch with us
Leave a Message, we will call you back quickly!