Leo Survey Instrument Co.,Ltd
| Payment Terms | T/T |
| Supply Ability | 500 Sets per month |
| Delivery Time | 3-5 work day |
| Packaging Details | Box and Carton |
| Type | Single Prism Set |
| Color | Prism Red; Tribrach and Adaptor Grey |
| Model | ADS18 |
| Prism Constant | 0mm/-30mm |
| Prism Diameter | 64mm |
| Prism Type | Circular |
| Tribrach | Three Jaw |
| Tribrach Type | Without Optical Plummet |
| Condition | New |
| Adaptor/Carrier Model | With Optical Plummet |
| Used For | Different Brands Total Stations |
| Package | Hard Carry Case |
| Brand Name | Leosurvey |
| Model Number | ADS18 |
| Certification | ISO |
| Place of Origin | China |
View Detail Information
Explore similar products
Tribrach Adaptor Total Station Prism Instrument Parts Yellow
GPR121 Total Station Prism GDF321 Total Station Reflector Carrier Adaptor
Carrier Tribrach With Optical Plummet GRT144 Survey Tribrach
ADS16 Survey Total Station Prism Circular Single Prism Set
Product Specification
| Payment Terms | T/T | Supply Ability | 500 Sets per month |
| Delivery Time | 3-5 work day | Packaging Details | Box and Carton |
| Type | Single Prism Set | Color | Prism Red; Tribrach and Adaptor Grey |
| Model | ADS18 | Prism Constant | 0mm/-30mm |
| Prism Diameter | 64mm | Prism Type | Circular |
| Tribrach | Three Jaw | Tribrach Type | Without Optical Plummet |
| Condition | New | Adaptor/Carrier Model | With Optical Plummet |
| Used For | Different Brands Total Stations | Package | Hard Carry Case |
| Brand Name | Leosurvey | Model Number | ADS18 |
| Certification | ISO | Place of Origin | China |
| High Light | Optical Plummet Survey Total Station ，20mm Circular Survey Total Station ，Optical Plummet total station part | ||
Nikon Type Prism Reflector Set for Total Station ADS18
Model: ADS18
Specification:
| Type | Single Prism Set |
| Color | Prism Red; Tribrach and Adaptor Grey |
| Model | ADS18 |
| Target Plate | Metal |
| Prism Constant | 0mm/-30mm |
| Prism Diameter | 64mm |
| Prism Type | Circular |
| Thread Type | 5/8x11 female thread |
| Tribrach Type | Three Jaw; without optical plummet |
| Adaptor Type | With Optical Plummet |
| Package | Hard Carry Case |
| Used for | Different Brands Total Station like Sokkia, Nikon, Trimble, Topcon etc. |
| Category | Optics Instruments Accessory |
Features:
This complete tilting prism assembly comes with a 64mm prism mounted in a sealed canister, a metal 5.5′ x 7′ fluorescent orange target, and a metal yoke.
The prism can either be mounted in a -30mm or zero offset position.
Locking knob in back of the prism locks the prism and target in the desired tilting position.
Prism Set Comes with a protective hard plastic carrying case.
Centring Accuracy
Measurement errors occur if Original prism holders are not used. Substitutes are not configured and often exhibit displacement between prism, holder and recording pin. The holder and the prism constitute a unit with which the centring and repeat accuracy is defined. The smallest dimensional change in the geometry of a glass prism or on the holder can lead to a deviation from the centring axis and thereby create measurement errors.
Range
The beam deviation of a prism defines the its maximum range, according to the principle "entering beam should equal the exiting beam". The smaller the beam deviation (measured in angle seconds), the greater the directly reflected signal strength to the sender optic. The returned signal quality defines the maximum range of a measurement.
Lifetime
In contrast to many conventional prisms, the reflective copper coating on the reverse side of Original prisms consists of a support coating, a vacuum-metallised copper coating, a protective coating and an overlying coat of lacquer. The special adhesive lacquer protects the underlying layers from corrosion and detachment. Working together, the copper coating and the lacquer increase the life of the prism significantly. An additional anti-reflex coating on the sensitive front surface of the prism provides a tough resistance to scratches. The production process of these coatings is so complex that only a very few manufacturers worldwide meet the requirements of Leica original prisms.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2011
Total Annual:
3000000-3500000
Employee Number:
100~150
Ecer Certification：
Verified Supplier
Leosurvey Instrument Co.,Ltd is a professional surveying accessories supplier in China. Items we supply covers: 1. Prisms (reflector prism, prism set, 360 degree prism, mini prism) 2. Prism Pole, Bipods and Tripods 3. Levelling Staff (Invar, Manganese, Aluminum) 4. Tripods (Aluminu... Leosurvey Instrument Co.,Ltd is a professional surveying accessories supplier in China. Items we supply covers: 1. Prisms (reflector prism, prism set, 360 degree prism, mini prism) 2. Prism Pole, Bipods and Tripods 3. Levelling Staff (Invar, Manganese, Aluminum) 4. Tripods (Aluminu...
Get in touch with us
Leave a Message, we will call you back quickly!