Product Specification

R&S®NRPxxT/TN/TWG/TWGN Thermal power sensors

Highest measurement accuracy

Key facts

• Dynamic range: –35 dBm to +20 dBm
• Frequency range: DC to 170 GHz
• Control and monitoring via USB and LAN (R&S®NRPxxTN/TWGN only)
• Outstanding performance for reference applications
• Excellent impedance matching

Most accurate power measurements for reference applications and use in calibration labs

R&S®NRP power meter sensors have long been recognized for supreme precision and speed. R&S®NRPxxT, R&S®NRPxxTN and R&S®NRPxxTWG thermal power sensors are ideal for complex measurement tasks where accuracy is vital. They combine excellent impedance matching with a sophisticated connector concept. The internal calibration test generates reliable and stable measurements. R&S®NRP power meter sensors are available as USB sensors and can also be controlled via LAN. The R&S®NRP power meter portfolio is ideal for production, R&D and calibration labs as well as installation and maintenance.

Outstanding performance for reference applications
Unparalleled linearity ideal for performing relative measurements

Thermal power sensors are used in complex measurement tasks whereaccuracy is vital. To improve measurement accuracy, theR&S@NRPXXT(N)/TWG(N) thermal power sensor hardware is designed tokeep measurement noise to a minimum and make the sensor immune tothermal environmental effects.Three times faster than comparablesolutions on the market with triggered measurements and > 500measurements/s in buffered mode.

High precision measurements R&S^®NRP67T

Excellent impedance matching
From N to WR 6.5, always the right RF interface

Measurement uncertainty generally results from mismatches causedby multiple reflections at the source and power sensors.To minimizesuch reflections, all thermal power sensors in the R&SeNRP family areexcellently matched to high frequencies, reducing measurementuncertainty

R&S^®NRPxxTWG power sensors

Intelligent, LAN enabled power measurements
Remote monitoring via LAN over any distance

The LAN power sensors are ideal for remote monitoring applicationssuch as satellite systems or particle accelerators, where sensors areplaced at different points in the system. The LAN interface makes iteasy to overcome large distances between the various test points andthe control center.

Remote monitoring of LAN power sensors

Internal calibration test

Rohde & Schwarz has implemented a special verification function inR&SeNRPxxT(N)sensors.The function covers all essential signal pathcomponents.Using a test routine, sensor response to highly stableapplied DC power is measured and compared to the values from theprevious calibration.The result provides information about the powersensor functionality and accuracy.

Test setup with R&S^®NRP power sensors

Advantage of a portfolio
Common R&S^®NRp power sensor features

• Minimize measurement uncertainty with fully characterized powersensors
• Intelligent averaging function minimizes measurement time
• USBTMC for easy system integration
• Built-in trigger l/O port
• Sensor status at a glance with status LED

Also available as three-path diode power sensors

Flexible interfaces
Robust 6-/8-pole, USB or LAN

The power sensors come with various detachable cables. The sensorend has a screw connection to prevent accidental loosening of thecable.Direct connections to Rohde & Schwarz signal generators andsignal and spectrum analyzers are enhanced with a high-performancepower meter. The R&S@NRP-ZKU Or R&S®NRP-ZKC USB interfacecable can be used to connect a power sensor to a laptop/PC via theUSB interface.

R&S^®NRP67TN and R&S^®NRP67T thermal power sensors

Available models

Models		Frequency range	Level range	LAN interface	Connector type
	R&S®NRP18T	DC - 18 GHz	-35 dBm - +20 dBm		N(m)
	R&S®NRP18TN	DC - 18 GHz	-35 dBm - +20 dBm	√	N(m)
	R&S®NRP33T	DC - 33 GHz	-35 dBm - +20 dBm		3.5 mm (m)
	R&S®NRP33TN	DC - 33 GHz	-35 dBm - +20 dBm	√	3.5 mm (m)
	R&S®NRP40T	DC - 40 GHz	-35 dBm - +20 dBm		2.92 mm (m)
	R&S®NRP40TN	DC - 40 GHz	-35 dBm - +20 dBm	√	2.92 mm (m)
	R&S®NRP50T	DC - 50 GHz	-35 dBm - +20 dBm		2.4 mm (m)
	R&S®NRP50TN	DC - 50 GHz	-35 dBm - +20 dBm	√	2.4 mm (m)
	R&S®NRP67T	DC - 67 GHz	-35 dBm - +20 dBm		1.85 mm (m)
	R&S®NRP67TN	DC - 67 GHz	-35 dBm - +20 dBm	√	1.85 mm (m)
	R&S®NRP90T	DC - 90 GHz	-35 dBm - +20 dBm		1.35 mm (m
	R&S®NRP90TN	DC - 90 GHz	-35 dBm - +20 dBm	√	1.35 mm (m
	R&S®NRP110T	DC - 110 GHz	-35 dBm - +20 dBm		1.00 mm (m)
	R&S®NRP75TWG	50 GHz - 75GHz	-35 dBm - +20 dBm		WR 15
	R&S®NRP75TWGN	50 GHz - 75GHz	-35 dBm - +20 dBm	√	WR 15
	R&S®NRP90TWG	60 GHz - 90 GHz	-35 dBm - +20 dBm		WR 12
	R&S®NRP90TWGN	60 GHz - 90 GHz	-35 dBm - +20 dBm	√	WR 12
	R&S®NRP110TWG	75 GHz - 110 GHz	-35 dBm - +20 dBm		WR 10
	R&S®NRP110TWGN	75 GHz - 110 GHz	-35 dBm - +20 dBm	√	WR 10
	R&S®NRP140TWG	90 GHz - 140 GHz	-35 dBm - +20 dBm		WR 8
	R&S®NRP140TWGN	90 GHz - 140 GHz	-35 dBm - +20 dBm	√	WR 8
	R&S®NRP170TWG	110 GHz - 170 GHz	-35 dBm - +20 dBm		WR 6.5
	R&S®NRP170TWGN	110 GHz - 170 GHz	-35 dBm - +20 dBm	√	WR 6.5

Available options

Interface cables
Product		Description
	R&S®NRP-ZKU	USB-A interface cable, length: 0.75 m
		USB-A interface cable, length: 1.5 m
		USB-A interface cable, length: 3 m
		USB-A interface cable, length: 5 m
	R&S®NRP-ZKC	USB-C interface cable, length: 0.75 m
		USB-C interface cable, length: 1.5 m
		USB-C interface cable, length: 3 m
	R&S®NRP-ZK6	6-pole interface cable, length: 1.5 m
		6-pole interface cable, length: 3 m
		6-pole interface cable, length: 5 m
	R&S®NRP-ZK8	8-pole interface cable, length: 1.5 m For connection to R&S®NRX
		8-pole interface cable, length: 3 m For connection to R&S®NRX
		8-pole interface cable, length: 5 m For connection to R&S®NRX
Interface accessories
Product		Description
	R&S®NRP-Z5	USB sensor hub R&S®NRP-Z5 can host up to 4 R&S®NRPxxT(N), R&S®NRPxxA(N) or R&S®NRP-Z sensors. A professional trigger solution allows simultaneous internal and wxternal triggering of all connected sensors.
Waveguide accessories
Product		Description
	R&S®ZCTW	Torque wrench for waveguide flange screws
	R&S®NRP-ZBW	Waveguide bracket for R&S®NRP110T
	R&S®WCA75	Waveguide Coax Adapter, WR15 to 1 mm (f) 50 GHz to 75 GHz
	R&S®WCA90	Waveguide Coax Adapter, WR12 to 1 mm (f) 60 GHz to 90 GHz
	R&S®WCA110	Waveguide Coax Adapter, WR10 to 1 mm (f) 75 GHz to 110 GHz
	R&S®WCA12-135	Waveguide Coax Adapter WR12 to 1.35 mm (f) Waveguide Coax Adapter WR12 to 1.35 mm female with S-Parameter characterisation, WG stabilzation bracket for USB and LAN NRP power sensors 60 - 90 GHz
Documentation
Product		Description
	R&S®DCV-1	Documentation of calibration values
	R&S®DCV-ZP	Printout of DCV

FAQ:

Q: What delivery methods do you use, and what is the delivery time?
A: We ship via EMS, DHL, FedEx, UPS, and TNT with tracking numbers. Delivery typically takes 4-7 business days.

Q: How are duties and taxes handled?
A: Duties and taxes vary by country and are usually the buyer’s responsibility. Please check local import regulations for details.

Q: What are your payment terms?
A: We require 100% T/T payment before shipment.

Q: How can I ensure the quality of products purchased internationally?
A: We work with reputable suppliers and conduct thorough inspections before shipping. Warranties are available for most products—please check for specific terms.

Q: What should I do if my shipment is delayed?
A: Check the tracking information provided. If there are delays, contact us or the carrier directly for updates.

Q: Do you offer discounts for bulk orders?
A: Yes, discounts may be available for bulk purchases. Please contact us to discuss your specific requirements.