Bicheng Electronics Technology Co., Ltd
| Payment Terms | T/T |
| Supply Ability | 50000 pcs per month |
| Delivery Time | 8-9 working days |
| Packaging Details | Vacuum bags+ Cartons |
| Base material: | RO4350B |
| Thickness | 1.6mm |
| Copper weight: | 1oz |
| Surface finish: | immersion gold |
| Layer count: | 2 layers |
| PCB size: | 135 x 135mm |
| Brand Name | bicheng |
| Model Number | BIC-001-V1.0 |
| Certification | UL, ISO9001, IATF16949 |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
TMM3 High Frequency Printed Circuit Board 20mil 0.508mm Microwave PCB DK3.27
Rogers TMM6 Microwave Printed Circuit Board 20mil 50mil 75mil DK6.0 RF PCB With
TMM6 Microwave Printed Circuit Board 50mil 1.27mm Rogers High Frequency PCB DK 6
Rogers TMM13i High Frequency Printed Circuit Board 15mil 20mil 25mil 60mil High
Product Specification
| Payment Terms | T/T | Supply Ability | 50000 pcs per month |
| Delivery Time | 8-9 working days | Packaging Details | Vacuum bags+ Cartons |
| Base material: | RO4350B | Thickness | 1.6mm |
| Copper weight: | 1oz | Surface finish: | immersion gold |
| Layer count: | 2 layers | PCB size: | 135 x 135mm |
| Brand Name | bicheng | Model Number | BIC-001-V1.0 |
| Certification | UL, ISO9001, IATF16949 | Place of Origin | CHINA |
High Frequency PCB Rogers 60mil 1.524mm RO4350B Double Sided RF Circuit Board Patch Antenna PCB
(Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference)
Rogers RO4350B hydrocarbon ceramic laminates are designed to offer superior high frequency performance and low cost circuit fabrication. The selection of laminates typically available to designers is significantly reduced once operational frequencies increase to 500 MHz and above.
The qualities required by designers of RF microwave circuits, matching networks, and controlled impedance transmission lines are present in the material RO4350B. Since standard circuit board materials cannot be used in many applications due to higher operating frequencies, low dielectric loss makes it possible to employ RO4350B material in these applications.
The dielectric constant is consistent across a wide frequency range and has one of the lowest temperature coefficients of any circuit board material.
The thermal coefficient of expansion (CTE) of RO4350B material offers PCB designers a number of significant advantages. Due to its identical expansion coefficient to that of copper, RO4350B exhibits high dimensional stability, a quality required for the fabrication of mixed dielectric multi-layer boards.
The low Z-axis CTE of RO4350B provides reliable plated through-hole quality, even in severe thermal shock applications. RO4350B material has a Tg of >280C so its expansion characteristics remain stable over the entire range of PCB processing temperatures.
RO4350B PCB Specifications
| PCB SIZE | 135 x 135mm=1PCS |
| BOARD TYPE | High frequency PCB, RF PCB |
| Number of Layers | Double sided PCB |
| Surface Mount Components | YES |
| Through Hole Components | YES |
| LAYER STACKUP | copper ------- 35um(1oz)+PLATE |
| RO4350B 60mil | |
| copper ------- 35um(1oz)+PLATE | |
| TECHNOLOGY | |
| Minimum Trace and Space: | 11mil/12mil |
| Minimum / Maximum Holes: | 0.3/2.2mm |
| Number of Different Holes: | 5 |
| Number of Drill Holes: | 184 |
| Number of Milled Slots: | 0 |
| Number of Internal Cutouts: | 0 |
| Impedance Control | NO |
| BOARD MATERIAL | |
| Glass Epoxy: | RO4350B 60mil, Tg 288℃ |
| Final foil external: | 1.5oz |
| Final foil internal: | 0oz |
| Final height of PCB: | 1.6mm ±0.16 |
| PLATING AND COATING | |
| Surface Finish | Electroless nickel over Immersion Gold (ENIG)( 2 micoinch over 100 microinch nickel) |
| Solder Mask Apply To: | NO |
| Solder Mask Color: | NO |
| Solder Mask Type: | N/A |
| CONTOUR/CUTTING | Routing |
| MARKING | |
| Side of Component Legend | NO |
| Colour of Component Legend | NO |
| Manufacturer Name or Logo: | N/A |
| VIA | Plated Through Hole(PTH) |
| FLAMIBILITY RATING | UL 94-V0 Approval MIN. |
| DIMENSION TOLERANCE | |
| Outline dimension: | 0.0059" (0.15mm) |
| Board plating: | 0.0030" (0.076mm) |
| Drill tolerance: | 0.002" (0.05mm) |
| TEST | 100% Electrical Test prior shipment |
| TYPE OF ARTWORK TO BE SUPPLIED | email file, Gerber RS-274-X, PCBDOC etc |
| SERVICE AREA | Worldwide, Globally. |
The typical applications included automotive radar and sensors, cellular base station antennas, direct broadcast satellites, low noise block, power amplifiers, RFID.
Data sheet of Rogers 4350B (RO4350B )
| RO4350B Typical Value | |||||
| Property | RO4350B | Direction | Units | Condition | Test Method |
| Dielectric Constant,εProcess | 3.48±0.05 | Z | 10 GHz/23℃ | IPC-TM-650 2.5.5.5 Clamped Stripline | |
| Dielectric Constant,εDesign | 3.66 | Z | 8 to 40 GHz | Differential Phase Length Method | |
| Dissipation Factortan,δ | 0.0037 0.0031 | Z | 10 GHz/23℃ 2.5 GHz/23℃ | IPC-TM-650 2.5.5.5 | |
| Thermal Coefficient of ε | +50 | Z | ppm/℃ | -50℃to 150℃ | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 1.2 x 1010 | MΩ.cm | COND A | IPC-TM-650 2.5.17.1 | |
| Surface Resistivity | 5.7 x109 | MΩ | COND A | IPC-TM-650 2.5.17.1 | |
| Electrical Strength | 31.2(780) | Z | Kv/mm(v/mil) | 0.51mm(0.020") | IPC-TM-650 2.5.6.2 |
| Tensile Modulus | 16,767(2,432) 14,153(2,053) | X Y | MPa(ksi) | RT | ASTM D 638 |
| Tensile Strength | 203(29.5) 130(18.9) | X Y | MPa(ksi) | RT | ASTM D 638 |
| Flexural Strength | 255 (37) | MPa (kpsi) | IPC-TM-650 2.4.4 | ||
| Dimensional Stability | <0.5 | X,Y | mm/m (mil/inch) | after etch+E2/150℃ | IPC-TM-650 2.4.39A |
| Coefficient of Thermal Expansion | 10 12 32 | X Y Z | ppm/℃ | -55℃to288℃ | IPC-TM-650 2.4.41 |
| Tg | >280 | ℃ TMA | A | IPC-TM-650 2.4.24.3 | |
| Td | 390 | ℃ TGA | ASTM D 3850 | ||
| Thermal Conductivity | 0.69 | W/M/oK | 80℃ | ASTM C518 | |
| Moisture Absorption | 0.06 | % | 48hrs immersion 0.060" sample Temperature 50℃ | ASTM D 570 | |
| Density | 1.86 | gm/cm3 | 23℃ | ASTM D 792 | |
| Copper Peel Stength | 0.88 (5.0) | N/mm (pli) | after solder float 1 oz. EDC Foil | IPC-TM-650 2.4.8 | |
| Flammability | (3)V-0 | UL 94 | |||
| Lead-free Process Compatible | Yes | ||||
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Seller
Year Established:
2003
Total Annual:
10 million-18 million
Employee Number:
350~450
Ecer Certification：
Verified Supplier
Company Profile Founded in 2003, Shenzhen Bicheng Electronics Technology Co., Ltd is an established high frequency PCB supplier and exporter in Shenzhen China, severing cellular base station antenna, satellite, high frequency passive components, microstrip line and band line circuit, millime... Company Profile Founded in 2003, Shenzhen Bicheng Electronics Technology Co., Ltd is an established high frequency PCB supplier and exporter in Shenzhen China, severing cellular base station antenna, satellite, high frequency passive components, microstrip line and band line circuit, millime...
Get in touch with us
Leave a Message, we will call you back quickly!