Remote-control Operation Mud Cleaners DN300*2 Cyclone for Solids Control

Product Description:

The Mud Cleaners is a high-performance solid control equipment that is essential in the efficient and effective management of drilling fluids in various drilling operations. With a weight of 4000kgs, it is a heavy-duty machine that is designed to handle large volumes of drilling fluids and solid particles.

The Mud Cleaners is equipped with two DN300 cyclones, providing powerful and efficient separation of solid particles from drilling fluids. This feature makes it ideal for use in Slurry Balance Pipe Jacking, Micro Tunnelling, and Trenchless operations, where the removal of solid particles is crucial for the success of the drilling process.

One of the key components of the Mud Cleaners is the Mud Desilter and Desander, which is responsible for the removal of fine and coarse particles from the drilling fluids. This is achieved through a process of centrifugal separation, where the heavier particles are forced to the outer edge of the cyclone and discharged, while the lighter particles are carried through the vortex and out of the machine.

Another important feature of the Mud Cleaners is the Mud Desander Separator, which works in conjunction with the Mud Desilter and Desander to provide a complete and efficient solid control system. The Mud Desander Separator is responsible for the removal of large particles, typically larger than 74 microns, ensuring that the drilling fluids are free from any solid particles that could impede the drilling process.

The Mud Cleaners is also known as a Solid Control Desander, as it effectively removes solid particles from drilling fluids, ensuring that the fluids are clean and free-flowing. This not only optimizes the drilling process but also reduces wear and tear on drilling equipment, ultimately saving time and costs.

The design of the Mud Cleaners is based on the principle of cyclone separation, where solid particles are separated from the drilling fluids through the use of centrifugal force. This process is extremely efficient and does not require any additional chemicals, making it environmentally friendly and cost-effective.

In addition to its powerful cyclones, the Mud Cleaners also features two sieve decks, each measuring 850*900mm. These decks are responsible for the further separation of solid particles from the drilling fluids, providing a more refined and clean fluid for use in drilling operations.

With its wide range of applications, the Mud Cleaners is an essential piece of equipment in any drilling operation. Whether it is used in Slurry Balance Pipe Jacking, Micro Tunnelling, or Trenchless operations, the Mud Cleaners guarantees efficient and effective management of drilling fluids, making it a vital component in any solids control system.

In summary, the Mud Cleaners is a powerful and efficient solid control equipment that is essential for the success of drilling operations. With its weight of 4000kgs, two DN300 cyclones, and two sieve decks, it is a heavy-duty machine that is capable of handling large volumes of drilling fluids and solid particles. Its various applications, including Slurry Balance Pipe Jacking, Micro Tunnelling, and Trenchless operations, make it a versatile and valuable addition to any solids control system.

Catalog: Solids Control Equipment

Keywords: Mud Desilter and Desander, Mud Desander Separator, Solid Control Desander, Mud Cleaner, Cyclone Separator

Features:

• Product Name: Mud Cleaners
• Cyclone Material: Wear-resisting Rubber
• Operation type: Remote-control, And Manual
• Vibrating Motor: OLI
• Power Supply Spec: 380V/50Hz Or On Request
• Vibration Mode: Linear Motion
• Drilling Fluid Desanding Unit
• Solid Control Desander
• Cyclone-Based Desanding System
• High Efficiency
• Compact Design
• Easy Maintenance

Technical Parameters:

Applications:

RLK Mud Cleaners are specialized equipment used in the oil and gas industry for the removal of sand and other solid particles from drilling mud. The model number for this product is RLKJC200S and it is manufactured in China. It has been certified with ISO and has a minimum order quantity of 1 unit. The price is stated in USD and the packaging details include plastic wrapping. The delivery time can range from 7-30 days and the payment terms accepted are T/T and LC. With a supply ability of 1000 units per year, this product guarantees high-end quality and efficiency.

• Brand Name: RLK
• Model Number: RLKJC200S
• Place of Origin: China
• Certification: ISO
• Minimum Order Quantity: 1
• Price: USD
• Packaging Details: Plastic wrapped
• Delivery Time: 7-30 days
• Payment Terms: T/T, LC
• Supply Ability: 1000 units per year
• Effect Reference: The Cleaned Sand Content Is Reduced To <3% When The Dirty Mud Contains 30% Sands.
• Sieve Quantity: 850*900mm*2 Each Upper & Under
• Sand Pump: Horizontal Alloy Sand Pump
• Cut Point d50: 45 μm
• Quality level: High-end Quality

The RLK Mud Cleaners are essential in the drilling process for oil and gas exploration. It is suitable for onshore and offshore drilling operations where the drilling mud contains a high percentage of sands. The mud cleaners are used to separate the solid particles from the mud, thus ensuring the smooth and efficient operation of the drilling equipment. This product is highly effective in reducing the sand content to less than 3% when the dirty mud contains 30% sands. It is also widely used in the construction and mining industries for the removal of sand and other solid particles from the drilling mud.

• Hydrocyclone Desander: The mud cleaner is equipped with a hydrocyclone desander that is responsible for separating the sand particles from the drilling mud.
• Mud Desander Separator: This product acts as a separator, removing the solid particles from the drilling mud and ensuring its smooth and efficient circulation.
• Hydrocyclone Desander Manufacturer: RLK is a leading manufacturer of hydrocyclone desanders, providing top-quality products for the oil and gas industry.
• Drilling Mud Desander: The mud cleaner is specifically designed for use in drilling operations, making it a highly efficient and reliable equipment for the oil and gas industry.

• Sieve Quantity: 850*900mm*2 Each Upper & Under
• Sand Pump: Horizontal Alloy Sand Pump
• Cut Point d50: 45 μm
• Quality level: High-end Quality

In conclusion, the RLK Mud Cleaners are essential equipment for the oil and gas industry, providing effective and efficient removal of sand and other solid particles from drilling mud. With its high-end quality, advanced technology, and reliable performance, it is a must-have for any drilling operation. As a leading manufacturer and supplier, RLK guarantees top-quality products and excellent customer service, making it the go-to choice for hydrocyclone desanders in the market.

Customization:

At RLK, we offer customized services for our Mud Cleaners, a solid control desander system designed for efficient removal of solids from drilling fluids. Our Cyclone-Based Desanding System, also known as the Mud Desander Separator, is a crucial component in the drilling process, ensuring optimal performance and productivity.

With our customized service, you can choose the specific features and configurations that best suit your needs. This includes selecting the number of screens, capacity, vibration mode, and application. Our RLKJC200S model offers a 2-layer screen, with a capacity of 880 GPM and 200 M³/h, and utilizes a linear motion vibration mode.

In addition, our Mud Cleaners are manufactured in China with ISO certification, ensuring high-quality standards and performance. Our minimum order quantity is 1 unit, and we offer competitive pricing in USD. The packaging for our Mud Cleaners is plastic wrapped for safe transportation, and we offer flexible delivery times of 7-30 days to accommodate your project schedule.

We accept various payment methods, including T/T and LC, and have a supply ability of 1000 units per year. Our Mud Cleaners are suitable for a wide range of applications, including Slurry Balance Pipe Jacking, Micro Tunnelling, and Trenchless projects.

Choose RLK for your customized Mud Cleaner needs and experience efficient and reliable solids control in your drilling operations.

Packing and Shipping:

Mud Cleaners are carefully packaged and shipped to ensure their safe delivery to our customers. The packaging process follows strict quality control measures to ensure that the product arrives in perfect condition.

The Mud Cleaners are first wrapped in protective materials to prevent any damage during transportation. They are then placed in sturdy wooden crates or pallets to provide additional protection. The crates or pallets are secured with straps to prevent any shifting during transit.

Our shipping department works closely with trusted and reliable carriers to ensure timely and efficient delivery. We offer a variety of shipping options to meet the specific needs of our customers, including air, sea, and land transportation.

Each package is carefully labeled with the product name, quantity, and any special handling instructions to ensure proper handling and delivery. Our team also provides all necessary documentation, such as invoices and customs forms, to facilitate smooth and hassle-free shipping.

Upon arrival, our customers can expect to receive their Mud Cleaners in excellent condition, ready for immediate use. We take great pride in our packaging and shipping process, as it is an essential part of ensuring customer satisfaction.