Ecer asks for your consent to use your personal data to:
Personalised advertising and content, advertising and content measurement, audience research and services development
Store and/or access information on a device
Your personal data will be processed and information from your device (cookies, unique identifiers, and other device data) may be stored by, accessed by and shared with 135 TCF vendor(s) and 65 ad partner(s), or used specifically by this site or app.
Some vendors may process your personal data on the basis of legitimate interest, which you can object to by do not consent. Contact our platform customer service, you can also withdraw your consent.
ConsentDo not consent
Guangdong Hua Qun Traffic Facilities Co., Ltd. By Shares
Thermoplastic paint is a type of durable, heat-applied coating commonly used for road markings, traffic signs, and other outdoor applications. It’s made from a mixture of synthetic resins, pigments, glass beads (for reflectivity), and fillers that solidify when cooled after being heated to a molten state. Unlike regular paint, which dries through solvent evaporation, thermoplastic paint is applied in a hot, liquid form (typically at temperatures between 180°C and 220°C or 356°F to 428°F) and hardens as it cools, forming a thick, tough layer that bonds well to surfaces like asphalt or concrete.
It’s popular for its longevity, weather resistance, and ability to withstand heavy traffic. The glass beads embedded in it enhance visibility at night by reflecting light from vehicle headlights. You’ll see it in things like lane lines, crosswalks, or parking lot markings. There are two main types: hydrocarbon-based (derived from petroleum) and alkyd-based (made from natural oils), with the former being more common due to cost and performance.
Specification
Gravity(g/㎥)
2.1g/㎥
Color
Yellow, Orange, Red and etc.
Heating Temperature
180℃-220℃
Softening Point(℃)
110℃
Coating Appearance
No wrinkles, dots, blisters, cracks,fall-out&stick tyres
Drying Time(min)
Within 3 minutes
Chroma Performance
Reverse materials(white)
Compressive Strength(Mpa)
26
Abrasive Resistance(mg)
42
Alkali Resistance
Great (in saturated solution of calcium hydroxide for 24 hours
Glass Beads(%)
19%
Fluidity(s)
40s
Coating Resistance
Resis -10℃ for 4 hours
Package
25kg/bag, by plastic woven bag. One 20’container can load Max 26 tons
Heat Resistance
Under 200℃-220℃ for hours
Material
C5 Petroleum Resin, CACO3, Wax, Glass Beads, EVA, PE and so on.
Application
Road marking, straight line, dotted line, curve, oriented arrow,letter and etc.
Water Resistance
Great (in water for 24 hours)
Steps to Use Thermoplastic Paint:
Surface Preparation:
Clean the surface thoroughly to remove dirt, dust, oil, or loose debris. Use a broom, wire brush, or pressure washer as needed.
Ensure the surface is dry, as moisture can prevent proper adhesion.
For porous surfaces like concrete, you may need to apply a primer to enhance bonding. Check the manufacturer’s instructions.
Heat the Thermoplastic:
Load the thermoplastic material into a preheater or melting kettle.
Heat it to the recommended temperature, typically between 180°C and 220°C (356°F to 428°F), depending on the specific product. Stir occasionally to ensure even melting and to avoid scorching.
Monitor the temperature carefully—overheating can degrade the material.
Test the Consistency:
The molten thermoplastic should have a smooth, liquid consistency, free of lumps. If it’s too thick, it won’t apply evenly; if too thin, it may not set properly.
Apply the Paint:
For Road Markings: Use a striping machine or screed box to pour the molten thermoplastic onto the surface in the desired pattern. Work quickly, as it begins to cool and harden once applied.
For Smaller Areas: Use a hand-held applicator or trowel to spread the material evenly.
Maintain a consistent thickness (usually 1.5–3 mm, depending on the project requirements).
Add Glass Beads (Optional):
For reflective markings (e.g., road lines), sprinkle glass beads over the wet thermoplastic immediately after application. The beads will embed as it cools, improving visibility.
Cooling and Setting:
Allow the thermoplastic to cool and harden naturally. This typically takes 5–15 minutes, depending on the ambient temperature and thickness. Avoid disturbing the area during this time.
Clean Up:
Clean your equipment while the thermoplastic is still warm using a scraper and solvent (if recommended by the manufacturer). Once it hardens, removal becomes much harder.
Technical Specification
Density(g/cm3)
1.8-2.3
Softening point (℃)
90-125
Compressive Strength(MPa)
≥12
Glass bead content(%)
0-30%
Liquidity
35±10
Packing
25kg/bag
Color
White/Yellow/Blue/Red/Green/Customized
Executive standard
JT/T280-2004/AASHTO/BS3262/Customized
Appearance
Powder
Construction temperature
180℃-220℃
Whiteness
70-85(Customized)
Inverse coefficient
50-550
Warranty
12 months
Storage Method
Avoid light and moisture
Packing Size
45×70×5CM
Company Details
Bronze Gleitlager
,
Bronze Sleeve Bushings
and
Graphite Plugged Bushings
from Quality China Factory
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2010
Total Annual:
35000000-5500000
Employee Number:
120~160
Ecer Certification：
Verified Supplier
Guangdong Hua Qun Traffic Facilities Co., Ltd. By Shares was found in 2 0 1 0, there are two factories located in Guangzhou and Zhanjiang, Guangdong province. Hua Qun registered capital of 13.66million R M B, and has its own import and export right.
... Guangdong Hua Qun Traffic Facilities Co., Ltd. By Shares was found in 2 0 1 0, there are two factories located in Guangzhou and Zhanjiang, Guangdong province. Hua Qun registered capital of 13.66million R M B, and has its own import and export right.
...
