Application Process

- Pre-treatment: The surface to be painted, such as a road surface, must be clean, dry, and free of dust, oil, and loose particles. This is usually achieved through methods like sandblasting or power washing.

- Heating: The thermoplastic paint is heated in a special kettle or melter to a temperature typically between 180°C and 220°C (356°F - 428°F), depending on the specific formulation. At this temperature, the paint becomes a fluid, viscous liquid that can be easily applied.

- Application: It is then applied using equipment such as a screed applicator or a spray gun. For road markings, a screed is commonly used to spread the molten paint evenly at a specific thickness. Glass beads are often sprinkled onto the wet paint immediately after application to enhance retroreflectivity, making the markings more visible at night.

- Cooling and Solidification: Once applied, the paint cools rapidly due to the lower temperature of the substrate and the surrounding environment. As it cools, it solidifies into a hard, durable coating within a short period, usually within a few minutes.

Technical Specification


Payment Terms	L/C,T/T,Western Union
Supply Ability	100 tons per day
Delivery Time	3-7work days
Packaging Details	25kg per bag,40 bags per ton,25-28 tons per 1x20ft container
Storage Conditions	Store in a cool, dry place
Application Temp	180~220℃
Standard	AASHTO, BS3262
Type	Outdoor Powder Coating
Cover Rate	4-5 kg/㎡
Oem	Yes
Adhesion	Strong
Standard Packaging	25kg per bag
Brand Name	HUA QUN
Model Number	HQ-203
Certification	ISO9001
Place of Origin	China


Payment Terms	L/C,T/T,Western Union	Supply Ability	100 tons per day
Delivery Time	3-7work days	Packaging Details	25kg per bag,40 bags per ton,25-28 tons per 1x20ft container
Storage Conditions	Store in a cool, dry place	Application Temp	180~220℃
Standard	AASHTO, BS3262	Type	Outdoor Powder Coating
Cover Rate	4-5 kg/㎡	Oem	Yes
Adhesion	Strong	Standard Packaging	25kg per bag
Brand Name	HUA QUN	Model Number	HQ-203
Certification	ISO9001	Place of Origin	China
High Light	Quick Drying Thermoplastic Paint ，Thermoplastic Paint Wear Resistant ，Road Marking Thermoplastic Paint

Gravity(g/㎥)	2.1g/㎥
Color	Yellow, Orange, Red and etc.
Heating Temperature	180℃-220℃
Softening Point(℃)	110℃
Coating Appearance	No wrinkles, dots, blisters, cracks,fall-out&stick tyres
Drying Time(min)	Within 3 minutes
Chroma Performance	Reverse materials(white)
Compressive Strength(Mpa)	26
Abrasive Resistance(mg)	42
Alkali Resistance	Great (in saturated solution of calcium hydroxide for 24 hours
Glass Beads(%)	19%
Fluidity(s)	40s
Coating Resistance	Resis -10℃ for 4 hours
Package	25kg/bag, by plastic woven bag. One 20’container can load Max 26 tons
Heat Resistance	Under 200℃-220℃ for hours
Material	C5 Petroleum Resin, CACO3, Wax, Glass Beads, EVA, PE and so on.
Application	Road marking, straight line, dotted line, curve, oriented arrow,letter and etc.
Water Resistance	Great (in water for 24 hours)

Density(g/cm3)	1.8-2.3
Softening point (℃)	90-125
Compressive Strength(MPa)	≥12
Glass bead content(%)	0-30%
Liquidity	35±10
Packing	25kg/bag
Color	White/Yellow/Blue/Red/Green/Customized
Executive standard	JT/T280-2004/AASHTO/BS3262/Customized
Appearance	Powder
Construction temperature	180℃-220℃
Whiteness	70-85(Customized)
Inverse coefficient	50-550
Warranty	12 months
Storage Method	Avoid light and moisture
Packing Size	45×70×5CM

Long Lasting And Wear Resistant Thermoplastic Paint For Road Marking Quick

Long-Lasting and Wear-Resistant Thermoplastic Paint for Road Marking Quick Drying and Easy Application

Thermoplastic paint is a type of paint that is heated to a molten state for application. It solidifies quickly upon cooling, forming a durable and wear-resistant coating, often used for road markings due to its high visibility and long lifespan.

Key Components:

Advantages of Hot Melt Paint:

Bronze Gleitlager

Bronze Sleeve Bushings

Graphite Plugged Bushings