Electric Motor Or Diesel Engine Driven End Suction Pump with Ordinary Motor Type

Product Description:

IS type single stage single suction centrifugal pump
IS type single stage single suction (axial suction) centrifugal pump, is a national joint design of energy saving pump, it is a new type of BA, B and other single stage water centrifugal pump. The advantages of single-stage single-suction centrifugal pump are: the whole series of hydraulic performance layout is reasonable, the user selection range is wide, and the maintenance is convenient; The efficiency and suction reach the international average advanced level. This type of pump is suitable for industrial and urban water supply and drainage, and can also be used for agricultural drainage and irrigation and for transporting water or other liquids with physical and chemical properties similar to water, and the temperature is not higher than 80℃.

IS type single stage single suction centrifugal pump product features
1, IS type single-stage single-suction centrifugal pump according to the international standard ISO2858 performance and size design, mainly by the pump body, pump cover, impeller, shaft, seal ring, sleeve and suspension bearings are composed.

2. The pump body and pump cover of the IS type single-stage single-suction centrifugal pump are divided from the back of the impeller, that is, the commonly referred to as the rear door structure. Its advantage is convenient maintenance, maintenance does not move the pump body, suction pipe, discharge pipe and motor, just remove the middle coupling of the extension coupling, you can exit the rotor part for maintenance.

3, the pump housing (that is, the pump body and the pump cover) constitute the pump studio. Impeller, shaft and rolling bearing are the rotor of the pump. The suspension bearing component supports the rotor part of the pump, and the rolling bearing is subject to the radial and axial forces of the pump.

4, in order to balance the axial force of the pump, most pump impeller before and after are provided with a sealing ring, and the impeller back cover is provided with a balance hole, because some pump axial force is not large, the impeller back without a sealing ring and balance hole.

5. The axial sealing ring of the pump is composed of a packing gland, packing ring and packing to prevent air intake or a large amount of water leakage. If the impeller of the pump is balanced, the cavity equipped with soft packing is communicated with the inlet of the impeller. If the liquid at the inlet of the impeller is in a vacuum state, it is easy to take air along the surface of the shaft sleeve. Therefore, the packing ring is installed in the packing chamber through the small hole on the pump cover, and the pressure water in the pump room is led to the packing ring for sealing. If the impeller of the pump does not have a balance hole, because the liquid pressure on the back of the impeller is greater than atmospheric pressure, there is no air leakage problem, so the packing ring is not installed.

6, in order to avoid shaft wear, the shaft through the packing cavity is equipped with shaft sleeve protection. There must be an O-ring between the shaft sleeve and the shaft to prevent air intake or water leakage along the mating surface.

7, the transmission mode of the pump is connected with the motor through the extension of the elastic coupling, the rotation direction of the pump, from the driving end, for the clockwise rotation.

Features:

• Product Name: Single Stage Single Suction Centrifugal Pump
• Weight: 50-1000kg
• Application: Water Supply, Irrigation, Fire Fighting, HVAC, Chemical Process, Etc.
• Design: Open Or Closed Impeller
• Medium: Clean Water, Sewage Water
• Motor Voltage: 220V/380V/440V

Technical Parameters:

Applications:

ZY Single Stage Single Suction Centrifugal Pump is a versatile product suitable for a wide range of application occasions and scenarios. With its brand name ZY and model numbers IS IH, this pump originates from Zhejiang, known for its quality manufacturing. The design of this pump features either an open or closed impeller, providing flexibility based on the specific requirements of the application.

One of the key attributes of this pump is its suitability for various applications such as water supply, irrigation, fire fighting, HVAC, chemical processes, and more. Its versatility makes it a reliable choice for different industries and scenarios. The installation type of this pump is horizontal, offering ease of integration into existing systems.

Whether the requirement is for an explosion-proof motor or an ordinary motor, this pump caters to diverse motor types to meet specific safety and operational needs. With a weight ranging from 50kg to 1000kg, the ZY Single Stage Single Suction Centrifugal Pump is sturdy and durable, suitable for different environments.

The pump's design as an end suction pump ensures efficient operation and easy maintenance. As a Single-stage Single-suction Pump, it offers reliability in various scenarios. The Horizontal single-suction Pump design further adds to its versatility, making it a practical choice for a wide range of applications.

Packing and Shipping:

Product Packaging for Single Stage Single Suction Centrifugal Pump:

The centrifugal pump will be securely packaged in a sturdy cardboard box with protective foam padding to prevent any damage during transportation.

Shipping Information:

Once the order is confirmed, the product will be carefully packed and shipped within 1-2 business days. We use reliable shipping carriers to ensure safe and timely delivery of the centrifugal pump to your specified address.

FAQ:

Q: What is the brand name of this centrifugal pump?

A: The brand name is ZY.

Q: What is the model number of this centrifugal pump?

A: The model number is IS IH.

Q: Where is this centrifugal pump manufactured?

A: This centrifugal pump is manufactured in Zhejiang, China.

Q: What type of suction does this centrifugal pump have?

A: This centrifugal pump has a single-stage single-suction design.

Q: What applications is this centrifugal pump suitable for?

A: This centrifugal pump is suitable for various industrial and agricultural applications such as water supply, irrigation, and HVAC systems.