Shenzhen Ryder Electronics Co., Ltd.
| Delivery Time | 45 |
| Payment Terms | D/P, T/T, |
| Supply Ability | 800PCS /Day |
| Packaging Details | Customer requirements |
| Type | Li-Ion, Lithium Battery |
| Cycle life | >500 Times |
| Capacity | 10 - 20Ah or customized |
| Voltage | 36V or customized |
| Charger | 42V 2A |
| Oem | Availiable, Acceptable, Accept OEM and ODM |
| Brand Name | RYDBATT |
| Model Number | Li-18650-10S3P-36V 10.4Ah |
| Certification | CE ROSH UN38.5 |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
48V Electric Bicycle Battery Pack 18650 13S5P 13Ah 500 - 1000 Times
18650 10S4P 36V 12.8Ah Electric Bicycle Battery Pack Long Cycle Life
18650 13S3P E Bike Li Ion Battery Pack customized cell brand
OEM ODM 10S2P Electric Bicycle Battery Pack Nominal 36V 10AH
Product Specification
| Delivery Time | 45 | Payment Terms | D/P, T/T, |
| Supply Ability | 800PCS /Day | Packaging Details | Customer requirements |
| Type | Li-Ion, Lithium Battery | Cycle life | >500 Times |
| Capacity | 10 - 20Ah or customized | Voltage | 36V or customized |
| Charger | 42V 2A | Oem | Availiable, Acceptable, Accept OEM and ODM |
| Brand Name | RYDBATT | Model Number | Li-18650-10S3P-36V 10.4Ah |
| Certification | CE ROSH UN38.5 | Place of Origin | CHINA |
| High Light | 36 volt lithium ebike battery ，e cycle battery | ||
36 volt lithium battery pack RYDBATT Li ion 18650 Battery Pack 10S3P 36V 10.4Ah for 36v Electric Bicycle Battery
Product Specification
* Enclosure ip-x5 waterproof
* With lock anti-theft, pull-up structure can be removed.
* The production environment conforms to international standards.
| MODEL | |||
| Li-18650-10S3P-36V 10.4Ah BMS Specification: F36V15/40A-NS Communication Protocol: NO Fault State Detection: NO SOC Display: YES | |||
| |||
| Product Specification | |||
| NO. | Content | Testing method | Remark |
| 1 | Charge Voltage | 42.0 V | |
| 2 | Discharge Cut-Off Voltage | 25.0 V | |
| 3 | Standard Charge | Charge the battery at constant current of 0.2C to reach 42.0V. | |
| Then charge the battery at constant 42.0V voltage until the charging current decreasing to 0.02C. | |||
| 4 | Standard Discharge | After the standard charging, rest for 1 hour then discharge to 25.0V@0.2C. | |
| 5 | Maximum Continuous Discharge Current | 15A | |
| 6 | Pulse Maximum Discharge Current | 40 A | W5S |
| 7 | Rated Capacity | Typical capacity: 8.7Ah | Standard discharge after standard charge |
| Minimum capacity: 8.25Ah -5% | |||
| 8 | Operation | Charging: 10~45°C | 60±25%R.H |
| Temperature Range | Discharging: -20~60°C | ||
| 9 | Storage | ≤1 month: - 20~45*C | 60±25%R.H Best 10~25°C for long-time storage |
| Temperature | ≤3 months: -10 ~ 25C | ||
| ≤year: 0 ~ 30°C | |||
| 10 | Impedance | ≤160mΩ | |
| 11 | Size Of Battery Pack | ≈365*105*92mm | |
| Product Electric Performance Test | |||
| NO. | Items | Test Conditions | Requirements |
| 1 | Capacity Retention | Fully charging, store them at (20 ± 5)笆 for | Discharging time>250min |
| 28 days, then discharge to 30.0V @0.2C. | |||
| 2 | Cycle Life @251 | Discharge to 30.0V @0.2C, then Charge the battery @0.2C to reach 42.0V. Then charge the battery at constant 42.0V voltage until the charging current decreasing to 0.02C. Rest for 10 min. discharge to 30.0V@ 0.2C and rest for 10 min. Continue the charge/discharge cydes until discharge capacity lower than 80% of rated capacity. | Cycles life M300 |
| 3 | Storage | Charge the battery to 40%~65% of its rated capacity using standard charging mode, then keep it in an 20t ± 5*C, humidity 45% ~ 85% room for 12 months, fully charge and discharge it @0.2C until voltage down to 30.0V. | Discharge time>210min |
| (The testing sample should be within 3 months dated from production date) | |||
| Mechanical Performance | |||
| NO. | Content | Testing method | Requirements |
| 1 | Vibration Test | After standard charging, put battery on the vibration table. 30 min experiment from X, Y, Z axis. Scan rate: 1oct/min; Frequency 10-30Hz, Swing 0.38mm; Frequency 30-55Hz, Swing 0.19mm. | No influence to batteries' electrical performance and appearance. |
| 2 | Drop Test | Random drop the battery from 1.0m height onto wood board 2 times. | No explosion or fire |
Product size and structure:
Delivery Time:
- Material Preparation Time: 7-15 days (or inventory)
- Production & Assembly Time 3-10 days
- Testing & Packaging Time: 2-10 days
- Total Delivery Time: 30-45days
- The faster delivery could be negotiable.
Factory photo:
Contact with our sales team for your OEM and ODM order.
OEM/ODM Service:
If you want to display your own brand LOGO on the goods such as Product, package bag, label or any where. It is no any problem. Our OEM and ODM service is always ready to do it.
Packing:
According to Stardard Export Packing.
Carton box, wooden box, wooden pallet
Company Details
Business Type:
Manufacturer
Year Established:
2005
Total Annual:
20000000-30000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Since its establishment in July 2005, Ryder New Energy Co., Ltd. has been committed to pioneering R&D in lithium battery system integration and customized solutions. With two decades of accumulated technical expertise, the company has secured comprehensive proprietary intellectua... Since its establishment in July 2005, Ryder New Energy Co., Ltd. has been committed to pioneering R&D in lithium battery system integration and customized solutions. With two decades of accumulated technical expertise, the company has secured comprehensive proprietary intellectua...
Get in touch with us
Leave a Message, we will call you back quickly!