Shenzhen Saef Technology Ltd.
| Payment Terms | L/C, T/T, Western Union, Paypal |
| Supply Ability | 3000K pcs per month |
| Delivery Time | 1-5 weeks |
| Packaging Details | Standard Exportation Package |
| Product | 1.12 inch OLED display Module |
| Number of Pixels | 128x128 Dots |
| Driver IC | SH1107 or Equivalent |
| Display Mode | Passive Matrix |
| Display Color | Mono White |
| Drive Duty | 1/128 Duty |
| Panel Size | 27 x 30.1 x 1.25 (mm) |
| Active Area | 20.14 x 20.14 (mm) |
| Pixel Pitch | 0.1575 x 0.1575(mm) |
| Pixel Size | 0.1375 x 0.1375(mm) |
| Viewing Direction | All Viewing Angles |
| Interface | 8-bit 68XX/80XX Parallel, 4-wire SPI, I2C |
| Connection | ZIF |
| Pin number | 20 pins |
| Life time | 50,000 hours @60cd/m2 |
| Compliance | REACH & RoHS Compliant |
| Brand Name | SAEF |
| Model Number | SFOS112XZ-128128PAN |
| Certification | ISO9001 / ISO14000 |
| Place of Origin | ShenZhen / China |
View Detail Information
Explore similar products
0.96 Inch 128x64 Dot Matrix OLED Display Module 4-Pin I2C Interface
3.12 Inch Industrial Grade OLED Display Module- 256x64 Pixels, 30-Pin with SPI,
0.69 Inch OLED Display Module 96x16 Graphic 14 pins I2C interface
Monochrome OLED Display Module 2.42 Inch White Blue Yellow Green 6800 8080
Product Specification
| Payment Terms | L/C, T/T, Western Union, Paypal | Supply Ability | 3000K pcs per month |
| Delivery Time | 1-5 weeks | Packaging Details | Standard Exportation Package |
| Product | 1.12 inch OLED display Module | Number of Pixels | 128x128 Dots |
| Driver IC | SH1107 or Equivalent | Display Mode | Passive Matrix |
| Display Color | Mono White | Drive Duty | 1/128 Duty |
| Panel Size | 27 x 30.1 x 1.25 (mm) | Active Area | 20.14 x 20.14 (mm) |
| Pixel Pitch | 0.1575 x 0.1575(mm) | Pixel Size | 0.1375 x 0.1375(mm) |
| Viewing Direction | All Viewing Angles | Interface | 8-bit 68XX/80XX Parallel, 4-wire SPI, I2C |
| Connection | ZIF | Pin number | 20 pins |
| Life time | 50,000 hours @60cd/m2 | Compliance | REACH & RoHS Compliant |
| Brand Name | SAEF | Model Number | SFOS112XZ-128128PAN |
| Certification | ISO9001 / ISO14000 | Place of Origin | ShenZhen / China |
| High Light | 128x128 Dots OLED Display Module ，1.12 Inch OLED Display Module ，SPI I2C Graphic OLED Display | ||
40mm ZIF FPC 1.12 Inch OLED Display Product Introduction
Product Quick Look
Description
SFOS112XZ-128128PAN OLED Display Module is a 128x128 resolution COG graphic display, diagonal size 1.12 inch. The OLED model is designed as industrial grade which is having the advantage of competitive price. The module is built-in with SH1107 IC; it supports 8-bit 68XX/80XX Parallel, 4-wire SPI, I2C interface. The supply voltage for Logic is 2.8V, supply voltage for display is 12V, operating current for VDD is 55μA, SFOS112XZ-128128PAN OEL Display Module can be operating at temperatures from -40℃ to +70℃; its storage temperatures range from -40℃ to +80℃.
40mm ZIF FPC 1.12 Inch OLED Display Product Drawing
Pin Definition
| Pin Number | Symbol | I/O | Function | |||
| PowerSuply | ||||||
| 1 | VPP | P | Power Supplly for OEL Panell This is the most positive voltage supply pin of the chip. It must be supplied externally. | |||
| 3 | VDD | P | Power Supplly for Logiic This is a voltage supply pin. It must be connected to external source. | |||
| 20 | GND | P | Ground of OEL System This is a ground pin. It also acts as a reference for the logic pins, the OEL driving voltages, and the analog circuits. It must be connected to external ground. | |||
| Driver | ||||||
| 6 | IREF | I | Current Reference for Brightness Adjustment This pin is segment current reference pin. A resistor should be connected between this pin and VSS. Set the current at 12.5μA maximum. | |||
| 2 | VCOMH | O | Voltage Output High Level for COM Signal This pin is the input pin for the voltage output high level for COM signals. A capacitor should be connected between this pin and VSS. | |||
| Interface | ||||||
|
4,5 | BS1 BS2 |
I | Communiicatiing Protocoll Sellect These pins are MCU interface selection input. | See the following table: | ||
| IM1 | IM2 | |||||
| 8-bit 68XX Parallel | 0 | 1 | ||||
| 8-bit 80XX Parallel | 1 | 1 | ||||
| 4-wire SPI | 0 | 0 | ||||
| I2C | 1 | 0 | ||||
| 8 | RES# | I | Power Reset for Controller and Driver This pin is reset signal input. When the pin is low, initialization of the chip is executed. Keep this pin pull high during normal operation. | |||
| 7 | CS# | I | Chip Select This pin is the chip select input. The chip is enabled for MCU communication only when CS# is pulled low. | |||
|
9 |
A0 |
I | Data/Command Controll This pin is Data/Command control pin. When the pin is pulled high, the input at D7~D0 will be interpreted as display data. When the pin is pulled low, the input at D7~D0 will be transferred to the command register. When the pin is pulled high and serial interface mode is selected, the data at SI will be interpreted as data. When it is pulled low, the data at SI will be transferred to the command register. In I2C mode, this pin acts as SA0 for slave address selection. For detail relationship to MCU interface signals, please refer to the Timing Characteristics Diagrams. | |||
|
10 |
WR# |
I | This is a MPU interface input pad. When connected to an 8080 MPU, this is active LOW. This pad connects to the 8080 MPU WR signal. The signals on the data bus are latched at the rising edge of the WR signal. When connected to a 6800 Series MPU: This is the read/write control signal input terminal. When R/W = “H”: Read. When R/W = “L”: Write. | |||
|
11 |
E/RD# |
I | This is a MPU interface input pad. When connected to an 8080 series MPU, it is active LOW. This pad is connected to the RD signal of the 8080 series MPU, and the data bus is in an output status when this signal is “L”. When connected to a 6800 series MPU, this is active HIGH. This is used as an enable clock input of the 6800 series MPU. | |||
| 12~19 | D0~D7 |
I/O | Seriiall Data Input/Output and cllock When serial mode is selected, D1 will be the serial data input SI and D0 will be the serial clock input SCL. When I2C mode is selected, D1 be the serial data input SDA and D0 is the serial clock input, SCL. | |||
Absolute Maximum Ratings
| Parameter | Symbol | Min | Max | Unit | Notes |
| Supply Voltage for Logic | VDD | -0.3 | 3.6 | V | 1, 2 |
| Supply Voltage for Display | VPP | 7 | 16.5 | V | 1, 2 |
| Operating Temperature | TOP | -40 | 70 | .C | |
| Storage Temperature | TSTG | -40 | 85 | .C | 3 |
| Life Time (100 cd/m2) | 10,000 | - | hour | 4 |
Note 1: All the above voltages are on the basis of “VSS = 0V”
Note 2: When this module is used beyond the above absolute maximum ratings, permanent breakage of the module may occur. Also, for normal operations, it is desirable to use this module under the conditions according to Section 3. “Optics & Electrical Characteristics”. If this module is used beyond these conditions, malfunctioning of the module can occur and the reliability of the module may deteriorate.
Note 3: The defined temperature ranges do not include the polarizer. The maximum withstood
temperature of the polarizer should be 80.C.
Note 4: End of lifetime is specified as 50% of initial brightness reached. The reference average operation life time at room temperature is estimated by the accelerated at high temperature conditions.
Optics Characteristics
| Characteristics | Symbol | Conditions | Min | Typ | Max | Unit |
| Brightness (VPP Supplied Externally) |
Lbr |
Note 4 |
100 |
140 |
- |
cd/m2 |
| C.I.E. (White) | (x) (y) | C.I.E. 1931 | 0.25 0.27 | 0.29 0.31 | 0.33 0.35 | |
| Dark Room Contrast | CR | - | >10000:1 | - | ||
| Viewing Angle | - | Free | - | degree |
DC Characteristics
| Characteristics | Symbol | Conditions | Min | Typ | Max | Unit |
| Supply Voltage for Logic | VDD | 1.65 | 2.8 | 3.5 | V | |
|
Supply Voltage for Display |
VPP |
Note 5 |
11.5 |
12.0 |
12.5 |
V |
|
High Level Input |
VIH |
IOUT = 100μA, 3.3MHz |
0.8×VDD |
- |
VDD |
V |
| Low Level Input | VIL | IOUT = 100μA, 3.3MHz | 0 | - | 0.2×VDD | V |
| High Level Output | VOH | IOUT = 100μA, 3.3MHz | 0.8×VDD | - | VDD | V |
| Low Level Output | VOL | IOUT = 100μA, 3.3MHz | 0 | - | 0.2×VDD | V |
| Operating Current for VCI | IDD | - | 55 | 100 | μA | |
| Operating Current for VPP | IPP | Note 6 | - | 25 | 32 | mA |
|
Sleep Mode Current for VDD |
IDD, SLEEP |
- |
0.1 |
5 |
μA | |
| Sleep Mode Current for VPP | IPP, SLEEP | - | 0.5 | 5 | μA |
Note 5 & 6: Brightness (Lbr) and Supply Voltage for Display (VPP) are subject to the change of the panel characteristics and the customer’s request.
Note 6: VDD = 2.8V, VPP = 12.0V, 100% Display Area Turn on.
40mm ZIF FPC 1.12 Inch OLED Display Product Image
Factory Facilities and Certificates
Company Details
Business Type:
Manufacturer
Year Established:
2007
Total Annual:
40000000-50000000
Employee Number:
400~500
Ecer Certification：
Verified Supplier
Founded in 2007, ShenZhen SAEF Technology Co., Ltd is committed to manufacturing and developing high-quality products for industrial LCD display, including TFT LCD, OLED, monochrome TN/STN/FSTN LCM display modules and system integration solutions. Saef Technology has become a leading enterprise in t... Founded in 2007, ShenZhen SAEF Technology Co., Ltd is committed to manufacturing and developing high-quality products for industrial LCD display, including TFT LCD, OLED, monochrome TN/STN/FSTN LCM display modules and system integration solutions. Saef Technology has become a leading enterprise in t...
Get in touch with us
Leave a Message, we will call you back quickly!