Three Phase Fuel Oil Handling System , Vertical Laboratory Centrifuge

Product Specification

Three Phase Fuel Oil Handling System, Vertical Laboratory Centrifuge

Description:

Marine oil separator is mainly used to remove water and mechanical impurities from fuel oil, lubricating oil, and other mineral oil in marine diesel engine units and land-used diesel generator units of power stations so as to reduce wear of the diesel engine and other machines and prolong engine life. The model is also used to separate two unsolvable liquids with different specific gravity or remove a small number of solid particles from a liquid. It is divided into a 2-phase solid-liquid separator and an oi-water-impurity 3-phase separator. They are workable on land and ship, we have the CCS certificate to certify their function and usage. There are different discharge types of oils, manual, partial, fully discharged, variable discharge, etc which depend on the different materials. Commonly, we define the capacity as the density of 0#  diesel oil, and we have a chart to help you find out the exact processing capacity of your needs. We not only provide the single oil separator, but also the whole unit containing the pumps, valves, heats, pipes, and so on.

Competitive Advantages:

• Overload overheat protection
•  High rotating speed
•  accurate dynamic balancing, 
•  long time with low vibration, 
•  safety and security.
•  Continuous working

Specification:

Condition for mineral oil separation and actual capacity (refer to the chart)

Peony organizes the model selection question as below:

1)How many kinds of oil can you separate?
This series separator is widely used for kinds of oils, especially for Marine diesel oil and the similar oil, such as light fuel oil, heavy fuel oil, lubrication oil, steam turbine oil, detergence oil, engine oil, etc

2)How can you select a suitable capacity?
Different oil has different capacity, our 1500L, 2000L, 3000L, 4000L, 5000L, 6000L, 8000L ,10000L capacity is for the Marine diesel oil 0# as sample. It also depends on the viscidity and temperature, and for all the capacity models, we have an oil characteristic sheet to help our customer to find out what their oil is, and what capacity their oil belongs to.

3) Is your separator self-cleaning?
We have 3 types of discharge means according to different materials and customer's requirements, we have a self-cleaning model and a manual cleaning model.
1. Manual discharge model for the oil with very less solid component
2. Full discharge model for the big capacity treatment and a little solid component
3. Partly discharge model for the bigger capacity treatment and more solid component

4. Variable discharge model

No. The full discharge model and the partly discharge model are both self-cleaning models.
4)Will you help us to select the model?
Yes, you can select the model by yourself, or as long as you provide your material characteristic, we have a professional engineering team to help you select the suitable machine

5)Do you only have a single machine or a unit?

Both we have.

Principle and structure

The disc separator is a vertical centrifuge. The drum is installed on the upper side of the vertical shaft. Driven by the motor, it will rotate at a high speed through the gearing. Inside the drum, there is a group of dish parts overlaying each other – a disc. There is a very small gap between the disc. The suspension (or emulsion) is fed into the drum through the inlet in the middle of the drum. When the suspension (or emulsion) flows through the gap between the disc, under the action of the centrifuge, the solid particles (or droplets) go down to the disc in the formation of sediment (or liquid layer). Along the disc surface, the sediment slides out of the disc and accumulates at the part with the largest diameter inside the drum. After the separation, the liquid is discharged out of the drum from the drain outlet. The role of the disc is to reduce the sediment distance of solid particles (or droplets) and enlarge the sediment area of the drum. With the disc inside the drum, the capacity of the separator is improved greatly. The solid gathering inside the drum is manually removed by taking apart the drum after powering off, or discharging from the drum through the slag-off part with the separator powered on.

Application:

1. Mineral oil industry: purification of fuel and lubricating oil used on main engines for vessels, land diesel engines, power plants, etc.

2. Dairy Industry: clarification, purification, and degreasing of fresh milk.

3. Vegetable oil industry: purification and clarification of palm oil, degumming, DE-soap, dehydration, and dewaxing of refined vegetable oil.

4. Beverage products industry: clarification of beer, juice, and beverage, extraction of plant protein and wastewater treatment, clarification of zymotic fluid of bio-engineering.

5. Starch industry: enrichment and classification of starch.

6. Pharmaceutical industry: purification or clarification during the extraction of agents of antibiotics and biochemistry pharmacy, clarification of Chinese drugs medicament.

7. Chemical industry: chemicals purification or clarification.

8. Lanolin industry: extract and purify the lanolin from the scouring wastewater.

9. Latex industry: purification and concentration of natural rubber latex.

10. Others: such as recycling of laboratories, petroleum, coking, kaolin and pulp, electrolyte treatment, wastewater treatment, environmental protection, and animal and plant protein extraction, the extraction and refining of animal fat, separation of mixed fatty acids.

Guarantee:

Peony Centrifuge has been dedicated to producing machinery and types of equipment and carrying out facility construction, pursuing the best quality and producing the best product at the same time.

We are committed to rewarding you with better quality in return for our interest in and faith.

We will do our utmost to one more step forward, based on our infinite services and trust in customers.