Shenzhen Olinkcom Technology Co.,Ltd
| Payment Terms | T/T |
| Supply Ability | 80-120k per month |
| Delivery Time | 3-6 working days |
| Packaging Details | 10pcs/ foil bag |
| Product Name | 10G SFP+ CWDM 1270-1610nm 10km |
| Data Rate | 10Gbps |
| Form Factor | SFP+ |
| Wavelength | 1270-1610nm |
| Distance | 10km |
| Compatibility | Cisco |
| TX Power | -6~0 |
| Receiver Sensitivity | <-14.4 |
| Function Options | DOM |
| Operating Temperature | 0 to 70°C (32 to 158°F) |
| Brand Name | OLKOPTO |
| Model Number | OLSCxx1XL-CD10 |
| Certification | CE, RoHS, FCC, FDA, UL, EMC, ISO9001 |
| Place of Origin | China |
View Detail Information
Explore similar products
Cisco Compatible 10G SFP+ 1310nm 40km DOM LC SMF Fiber Optic Transceiver
SFP-10G-ER40 Compatible Arista Networks 10G SFP+ 1310nm 40km Transceiver
Juniper Networks EX-SFP-10GE-ER40 1310nm 40km DOM LC SMF 10G sFP+ Transceiver
10G-ER SFP+ 1310nm 40km LC SMF SFP Transceiver Module Compatible Brocade 10G
Product Specification
| Payment Terms | T/T | Supply Ability | 80-120k per month |
| Delivery Time | 3-6 working days | Packaging Details | 10pcs/ foil bag |
| Product Name | 10G SFP+ CWDM 1270-1610nm 10km | Data Rate | 10Gbps |
| Form Factor | SFP+ | Wavelength | 1270-1610nm |
| Distance | 10km | Compatibility | Cisco |
| TX Power | -6~0 | Receiver Sensitivity | <-14.4 |
| Function Options | DOM | Operating Temperature | 0 to 70°C (32 to 158°F) |
| Brand Name | OLKOPTO | Model Number | OLSCxx1XL-CD10 |
| Certification | CE, RoHS, FCC, FDA, UL, EMC, ISO9001 | Place of Origin | China |
| High Light | 10G Cisco Compatible Transceiver ，1610nm Cisco Compatible Transceiver ，10g sfp+ cwdm | ||
10Gbps CWDM SFP+ Cisco Compatible Transceiver 1610nm 10km DOM
Cisco CWDM-SFP10G Compatible 10G CWDM SFP+ 1270~1610nm 10km Transceiver
Product Features
● Supports 9.95 to 11.5Gb/s bit rates
● Duplex LC connector
● Hot pluggable SFP+ footprint
● Uncooled 1270nm~1610nm DFB transmitter, PIN photo-detector
● Applicable for 10km SMF connection
● Low power consumption, < 1W
● Digital Diagnostic Monitor Interface
● Optical interface compliant to IEEE 802.3ae 10GBASE-LR
● Electrical interface compliant to SFF-8431
● Operating case temperature:
Commerical:0 to 70 °C Industrial:-40 to 85 °C
Applications
● 10GBASE-LR/LW at 10.3125Gbps
● 10G Ethernet
● Other optical links
Product Descriptions
Olinkcom’s OLSCxx1XL-C(I)D10 CWDM DFB 10Gbps SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 10km. This transceiver consists of two sections: The transmitter section incorporates a CWDM DFB laser. And the receiver section consists of a PIN photodiode integrated with a TIA. All modules satisfy class I laser safety requirements. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage.
Absolute Maximum Ratings
| Parameter | Symbol | Min. | Max. | Unit | Note |
| Supply Voltage | Vcc | -0.5 | 4.0 | V | |
| Storage Temperature | TS | -40 | 85 | °C | |
| Relative Humidity | RH | 0 | 85 | % |
Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.
General Operating Characteristics
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Data Rate | DR | 9.95 | 10.3125 | Gb/s | ||
| Supply Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | |
| Supply Current | Icc5 | 300 | mA | |||
| Operating Case Temp. | Tc | 0 | 70 | °C | ||
| TI | -40 | 85 |
Electrical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter | ||||||
| Differential data input swing | VIN,PP | 180 | 700 | mVpp | 1 | |
| Transmit Disable Voltage | VD | VCC-0.8 | Vcc | V | ||
| Transmit Enable Voltage | VEN | Vee | Vee+0.8 | |||
| Input differential impedance | Rin | 100 | Ω | |||
| Receiver | ||||||
| Differential data output swing | Vout,pp | 300 | 850 | mVpp | 2 | |
| Output rise time and fall time | Tr, Tf | 28 | 2.0 | Vcc+0.3 | Ps | 3 |
| LOS asserted | VLOS_F | VCC-0.8 | Vcc | V | 4 | |
| LOS de-asserted | VLOS_N | Vee | Vee+0.8 | V | 4 | |
Notes:
1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.
2. Into 100Ω differential termination.
3. 20 – 80%. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1’s and four 0’s sequence in the PRBS 9 is an acceptable alternative.
4. LOS is an open collector output. Should be pulled up with 4.7kΩ – 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1.
Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter | ||||||
| Operating Wavelength | λ | λ-7.5nm | λ | λ+7.5nm | nm | 1 |
| Ave. output power (Enabled) | PAVE | -6 | 0 | dBm | 2 | |
| Side-Mode Suppression Ratio | SMSR | 30 | dB | |||
| Extinction Ratio | ER | 4 | 5 | dB | ||
| RMS spectral width | Δλ | 1 | nm | |||
| Rise/Fall time (20%~80%) | Tr/Tf | 50 | ps | |||
| Dispersion penalty | TDP | 2.5 | dB | |||
| Relative Intensity Noise | RIN | -128 | dB/Hz | |||
| Output Optical Eye | Compliant with IEEE 0802.3ae | |||||
| Receiver | ||||||
| Operating Wavelength | λ | 1260 | 1620 | nm | ||
| Receiver Sensitivity | PSEN | -14.4 | dBm | 3 | ||
| Overload | PAVE | +0.5 | dBm | |||
| Receiver Reflectance | Rrx | -12 | dB | |||
| LOS Assert | Pa | -30 | dBm | |||
| LOS De-assert | Pd | -17 | dBm | |||
| LOS Hysteresis | Pd-Pa | 0.5 | 4 | dB | ||
Notes:
1.The wavelength λ =1270nm~1610nm, Total 18 wavelengths,20nm spacing
2. Measured at 10.3125b/s with PRBS 231 – 1 NRZ test pattern.
3.Under the ER worst =5, measured at 10.3125 Gb/s with PRBS 231 - 1 NRZ test pattern for BER < 1x10-12
Digital Diagnostic Specifications
The OLSCxx1XL-CD10 transceivers can be used in host systems that require either internally or externally calibrated digital diagnostics.
| Parameter | Symbol | Units | Min. | Max. | Accuracy | Note |
| Transceiver temperature | DTemp-E | ºC | -45 | +90 | ±5ºC | 1,2 |
| Transceiver supply voltage | DVoltage | V | 2.8 | 4.0 | ±3% | |
| Transmitter bias current | DBias | mA | 0 | 127 | ±10% | 3 |
| Transmitter output power | DTx-Power | dBm | -8 | +2 | ±2dB | |
| Receiver average input power | DRx-Power | dBm | -16 | 0 | ±2dB |
Notes:
1.When Operating temp.=0~70 ºC,the range will be min=-5,Max=+75
2. Internally measured
3. The accuracy of the Tx bias current is 10% of the actual current from the laser driver to the laser
• Cisco network switches
• Cisco network routers
• Cisco firewalls
• Cisco security gateway
• Cisco fiber media converter
• Cisco network adapters
• Cisco network interface card (NICs)
Company Details
Business Type:
Manufacturer
Year Established:
2011
Total Annual:
25000000-28000000
Employee Number:
150~300
Ecer Certification：
Verified Supplier
Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able ... Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able ...
Get in touch with us
Leave a Message, we will call you back quickly!