Shaanxi Fortune Industries Co.ltd
| Payment Terms | L/C, T/T, Western Union, MoneyGram |
| Supply Ability | 50000PCS/MONTH |
| Delivery Time | 20-45DAYS |
| Packaging Details | carton,pallet |
| overrunning speed | 750/1050 |
| Friction torque | 110 Ncm |
| Vibration | ZV1, ZV2, ZV3, or as requested |
| Weight (kg) | 13 |
| Seals Type | Sealed |
| Width | 110mm |
| Brand Name | SFT |
| Model Number | NF70 |
| Place of Origin | China |
View Detail Information
Explore similar products
CSK40PP Chrome Steel Conveyors One Way Bearings For Textile Machinery
DC5476 Low Noise Sprag One Way Clutch Bearings Gearbox Bearing SFT
One Way Clutch Bearings CKA3585 Sprag Clutch Bearing For Textile Equipment
Freewheel One Way Gcr15 Clutch Bearing For Mining Machinery
Product Specification
| Payment Terms | L/C, T/T, Western Union, MoneyGram | Supply Ability | 50000PCS/MONTH |
| Delivery Time | 20-45DAYS | Packaging Details | carton,pallet |
| overrunning speed | 750/1050 | Friction torque | 110 Ncm |
| Vibration | ZV1, ZV2, ZV3, or as requested | Weight (kg) | 13 |
| Seals Type | Sealed | Width | 110mm |
| Brand Name | SFT | Model Number | NF70 |
| Place of Origin | China | ||
| High Light | NF70 One Way Clutch Bearings ，NF 70 One Way Clutch Bearings ，70*170*110mm One Way Clutch Bearings | ||
NF70 NF 70 70*170*110mm Good Quality Roller Type Freewheel One Way Clutch Bearing
Description of Roller Type Backstop Clutch NF70 One Way Freewheel Clutch
| Item | NF70 |
| Material | GCr15 |
| Inner dia. | 70 mm |
| Outer dia. | 170 mm |
| Thickness | 110 mm |
| Torque capacity | 5875 Nm |
| Weight | 13kg |
| Port | Shanghai;Ningbo |
| Delivery time | 30-35days |
Type NF is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation.
Standard lubrication is oil .Nominal outside diameter is a standard ball bearing dimension. A typical arrangement is to install this type alongside a bearing with the same housing tolerances, as shown on the following page. The inner race is keyed to the shaft. The outer race has a positive n6 tolerance to give a press fit in a H7 housing. Additional side notches provide for positive torque transmission.
If the housing tolerance is to K6, use of the notches is not necessary, but the housing must be strong enough to not expand after assembly.
Datasheets of Roller Type Backstop Clutch NF70 One Way Freewheel Clutch
| Type | Size | Overrunning speeds | Weight | ||||||||||
| NF | dH7 | TKN1) | nimax2) | namax3) | Dn6 | D5 | D6 | L | t | bH11 | r | r1 | |
| [mm] | [Nm] | [min-1] | [min-1] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [kg] | |
| 8 | 20 | 5000 | 6000 | 37 | 30 | 20 | 20 | 3 | 6 | 1 | 1.5 | 0.1 | |
| 12 | 20 | 5000 | 6000 | 37 | 30 | 20 | 20 | 3 | 6 | 1 | 1.5 | 0.1 | |
| 15 | 78 | 4500 | 5400 | 47 | 37 | 26 | 30 | 3.5 | 7 | 1.5 | 1.5 | 0.3 | |
| 20 | 188 | 3000 | 3600 | 62 | 52 | 37 | 36 | 3.5 | 8 | 2 | 2 | 0.6 | |
| 25 | 250 | 2200 | 2600 | 80 | 68 | 49 | 40 | 4 | 9 | 2.5 | 2 | 1.1 | |
| 30 | 500 | 1800 | 2100 | 90 | 75 | 52.5 | 48 | 5 | 12 | 2.5 | 2 | 1.6 | |
| 35 | 663 | 1600 | 1950 | 100 | 80 | 58 | 53 | 6 | 13 | 2.5 | 2.5 | 2.3 | |
| 40 | 1100 | 1250 | 1700 | 110 | 90 | 62 | 63 | 7 | 15 | 3 | 2.5 | 3.1 | |
| 45 | 1500 | 1100 | 1500 | 120 | 95 | 69 | 63 | 7 | 16 | 3 | 2.5 | 3.7 | |
| 50 | 2375 | 850 | 1300 | 130 | 110 | 82 | 80 | 8.5 | 17 | 3.5 | 3 | 5.4 | |
| 55 | 2500 | 800 | 1200 | 140 | 115 | 83 | 80 | 9 | 18 | 3.5 | 3 | 6.1 | |
| 60 | 4250 | 700 | 1100 | 150 | 125 | 93.5 | 95 | 9 | 18 | 3.5 | 3.5 | 8.5 | |
| 70 | 5875 | 620 | 900 | 170 | 140 | 106 | 110 | 9 | 20 | 3.5 | 3.5 | 13 | |
| 80 | 10000 | 550 | 800 | 190 | 160 | 122 | 125 | 9 | 20 | 4 | 3.5 | 18 | |
| 90 | 17250 | 480 | 700 | 215 | 180 | 133 | 140 | 11.5 | 24 | 4 | 4 | 25.3 | |
| 100 | 19625 | 400 | 600 | 260 | 210 | 157 | 150 | 14.5 | 28 | 4 | 4 | 42.1 | |
| 130 | 34750 | 300 | 480 | 300 | 240 | 188 | 180 | 17 | 32 | 5 | 5 | 65 | |
| 150 | 44375 | 250 | 400 | 320 | 260 | 205 | 180 | 17 | 32 | 5 | 5 | 95 | |
MOUNTING
Company Details
Business Type:
Exporter,Trading Company,Seller
Year Established:
2005
Total Annual:
3000000-5000000
Employee Number:
100~120
Ecer Certification：
Verified Supplier
Shaanxi Fortune Industries Co.,ltd located in Xi’an of the oldest city in China. We have experience for over 15 years, As a professional exporter in Ball & Roller Bearings and Auto Parts on standard and nonstandard, our success is based on: High Quality Bearing at the Good Price ... Shaanxi Fortune Industries Co.,ltd located in Xi’an of the oldest city in China. We have experience for over 15 years, As a professional exporter in Ball & Roller Bearings and Auto Parts on standard and nonstandard, our success is based on: High Quality Bearing at the Good Price ...
Get in touch with us
Leave a Message, we will call you back quickly!