MINGCHENG GROUP LIMITED
| Payment Terms | L/C, T/T, Western Union, PayPal , |
| Delivery Time | 5-10 working days |
| Packaging Details | 5kg per bottle, 20kg per carton |
| Brand Name | MC silicone |
| Model Number | MC-ER1185 |
| Certification | MSDS , SGS， Reach |
| Place of Origin | China |
View Detail Information
Explore similar products
Yellow Resistance Deep Pour Crystal Clear Epoxy Resin For Casting Wood River
Mix Ratio 1:1 Crystal Clear Epoxy Resin For Arts Crafts & Castings
Low Heat Release Crystal Clear Epoxy Resin Coffee Table Casting Moisture Proof
Yellow Resistance Two Part Crystal Clear Epoxy Resin For Wood Casting 3506912000
Product Specification
| Payment Terms | L/C, T/T, Western Union, PayPal , | Delivery Time | 5-10 working days |
| Packaging Details | 5kg per bottle, 20kg per carton | Brand Name | MC silicone |
| Model Number | MC-ER1185 | Certification | MSDS , SGS， Reach |
| Place of Origin | China | ||
| High Light | 1:1 crystal clear epoxy resin ，Art Crafts epoxy resin ，wood coating epoxy resin | ||
Description:
MC-ER1185A/B Crystal Clear Epoxy Resin is two-component transparent epoxy resin compound that cures at room temperature and high temperature. Epoxy Resin features with low mixing viscosity, good de-aeration; long working time at room temperature, low heat release, anti-yellow; excellent mechanical properties after curing. The cured product has good transparency and bright in surface.
Applications:
It is mainly used for casting arts and crafts, like coasters, crystal button, women's accessories , crystal combs, and other DIY decorations, etc.
Physical Properties:
| Item No. | MC-ER1185 A | MC- ER1185 B |
| Appearance | Clear liquid | Clear liquid |
| Density 25℃,g/cm3 | 1.1～1.2 | 0.9～1.0 |
| Viscosity 25℃,Pa.s | 5000 | 4500 |
| Mix Ratio | 1 A : 1 B | |
| Hardness | 82-84 Shore D | |
| Usable time25℃ 100g | 20-50 Minutes | |
| Curing condition 25℃ 100g | 4-6 hours | |
| Compressive strength | 8.5 kg/mm2 | |
| Impact strength | 7.5 kg/mm2 | |
Use method:
1. Working environment: Please keep the plastic container clean. A, B components are strictly according to the weight ratio, accurately weighed, and stir it evenly along the inner wall of the container clockwise until it is used for 3-5 minutes.
2. According to the operating time and amount of glue deployment, to avoid waste. When the temperature is lower than 15 °C, please pre-heat the A glue to 30 °C and then adjust the rubber, easy to operate (low temperature, A glue will thicken ); After use must seal the lid, to avoid the product due to moisture absorption scrapped.
3. When the relative humidity is more than 85%, the surface of the cured product can easily absorb the moisture in the air to form a white mist. Therefore, when the relative humidity is more than 85%, it is not suitable for room temperature curing. It is recommended to use the heating and curing.
4. The lid must be sealed after use to avoid the product being scrapped due to moisture absorption.
The above performance data is typical data measured in a laboratory environment with a temperature of 25°C and a humidity of 70%. It is for customer reference only
Packaging:
5kg per bottle-20kg per carton or 200kg per drum
Other package please contact our sales team for customize.
Precautions:
1. The products must be stored in a closed and airtight environment under the condition of 25°C relative humidity <70%.
2. Since part B is easy to absorb water vapor and lead to deterioration, the packaging barrel must be tightly sealed with the cover.
3. The more the amount mixed together, the faster the reaction will be, the faster the curing speed will be, and it may be accompanied by a lot of heat, please pay attention to control the mixing amount at one time, because due to the accelerated reaction, its use time will also be shortened, and the mixed glue should be used up in a short time as much as possible;
4. During the curing process, please keep the environment clean to prevent impurities or dust from falling onto the surface of the uncured glue
5. When using the product, glasses and other necessary labor protection supplies are recommended.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2010
Total Annual:
5000000-10000000
Employee Number:
50~80
Ecer Certification：
Verified Supplier
Mingcheng Group Limited was established in 2010 based in Dongguan,China, with brand MC Silicone for overseas market, dedicated to manufacturing and R&D of mold making and casting materials. Our professional approach to all our work, together with creative ideas and strong technical ... Mingcheng Group Limited was established in 2010 based in Dongguan,China, with brand MC Silicone for overseas market, dedicated to manufacturing and R&D of mold making and casting materials. Our professional approach to all our work, together with creative ideas and strong technical ...
Get in touch with us
Leave a Message, we will call you back quickly!