MINGCHENG GROUP LIMITED
| Payment Terms | L/C, T/T, Western Union |
| Supply Ability | 4000kg per day |
| Delivery Time | 3-10 working days after payment |
| Packaging Details | 20kg per drum;200kg per drum |
| Product Name | Polyurethane rubber |
| Hs Code | 3909500000 |
| Applications | Molding and casting |
| Color | Clear Yellow |
| Hardness | 80 Shore A |
| Viscosity | 1400±300 cps |
| Mix Ratio | 1:1 |
| Working time | 8-14 mins（variable） |
| Curing time | 24 hours |
| Tensile Strength | 9-14 Mpa |
| Tear Strength | 45-50 KN/m |
| Elongation | 360-420% |
| Shelf life | 6 months |
| Rebound | 36-38% |
| Specific gravity（25℃） | 1.17 g/ cm³ |
| Brand Name | MC |
| Model Number | MC-PU80 |
| Certification | MSDS |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
Polyurethane Rubber For Concrete Stamp
2500Cps Mold Making Polyurethane Liquid Rubber For Concrete Stamp Casting
40 Shore A RTV Polyurethane Liquid Rubber For Making Molds For Concrete Wall
1:1 Colorless 45 Shore A Polyurethane Liquid Rubber For Concrete Wall Panel
Product Specification
| Payment Terms | L/C, T/T, Western Union | Supply Ability | 4000kg per day |
| Delivery Time | 3-10 working days after payment | Packaging Details | 20kg per drum;200kg per drum |
| Product Name | Polyurethane rubber | Hs Code | 3909500000 |
| Applications | Molding and casting | Color | Clear Yellow |
| Hardness | 80 Shore A | Viscosity | 1400±300 cps |
| Mix Ratio | 1:1 | Working time | 8-14 mins（variable） |
| Curing time | 24 hours | Tensile Strength | 9-14 Mpa |
| Tear Strength | 45-50 KN/m | Elongation | 360-420% |
| Shelf life | 6 months | Rebound | 36-38% |
| Specific gravity（25℃） | 1.17 g/ cm³ | Brand Name | MC |
| Model Number | MC-PU80 | Certification | MSDS |
| Place of Origin | CHINA | ||
| High Light | RTV 2 Liquid Polyurethane Rubber ，24 hours Liquid Polyurethane Rubber ，Pool Deck Molds Liquid Polyurethane Rubber | ||
RTV 2 Liquid Polyurethane Rubber for Stamped Concrete Pool Deck Molds
Description of RTV 2 Liquid Polyurethane Rubber for Stamped Concrete Pool Deck Molds
Polyurethane rubber consists of A&B component, which, after mixing, cure at room temperature to flexible, high-strength, mold rubber. It can make durable molds for casting plasters and waxes, cement.
Characteristics of RTV 2 Liquid Polyurethane Rubber for Stamped Concrete Pool Deck Molds
It has excellent processing properties, solid in common temperature, shorter gel time, and regulating color by adding pigment. The ware has good properties of abrasive resistance, hydrolysis resistance, transparent, good resilience, stable dimension.
|
A | Type | MC-PU80 A |
| Appearance | Transparent liquid | |
| Viscosit(y 3mPa·s) | 1400±300 | |
|
B | Type | MC-PU80 B |
| Appearance | Light yellow liquid | |
| Viscosity(mPa·s) | 520±150 | |
| Ratio A:B(mass ratio) | 1:1 | |
| Working time /min | 8-14(variable) | |
| Appearance | Light yellow | |
| Hardness (shore A) | 80±2 | |
| Tensile strength/MPa | 9-14 | |
| Elongation at break/ % | 360-420 | |
| Tear strength/(kN/m) | 45-50 | |
| Rebound/ % | 36-38 | |
| Specific gravity(25℃)(g/ cm3) | 1.17 | |
Applications of RTV 2 Liquid Polyurethane Rubber for Stamped Concrete Pool Deck Molds
Suitable for making the mould of cultural stone, concrete stamping mats. It also applies to electrical equipment potting, rubber rollers, Ski and snowboard ,rubber plates, rubber wheels, and others.
Using Instructions of RTV 2 Liquid Polyurethane Rubber for Stamped Concrete Pool Deck Molds
NOTE: To ensure thorough coverage, lightly brush the release agent with a soft brush over all surfaces of the model. Follow with a light mist coating and let the release agent dry for 30 minutes. Because no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.
Measuring & Mixing...
Liquid urethanes are moisture sensitive and will absorb atmospheric moisture. Mixing tools and containers should be clean and made of metal or plastic. Materials should be stored and used in a warm environment (73°F/23°C).
IMPORTANT: Stir Part B thoroughly before dispensing. After dispensing equal amounts of Parts A and B into mixing container, mix thoroughly for at least 3 minutes making sure that you scrape the sides and bottom of the mixing container several times.
If Mixing Large Quantities (16 lbs./7 kgs. or more) at one time, use a mechanical mixer (i.e. Squirrel Mixer or equal) for 3 minutes followed by careful hand mixing for one minute as directed above. Then, pour entire quantity into a new, clean mixing container and do it all over again.
Although this product is formulated to minimize air bubbles in your the cured rubber, vacuum degassing prior to pouring rubber will further reduce entrapped air.
Pouring, Curing & Performance..
For best results, pour your mixture in a single spot at the lowest point of the containment field. Let the rubber seek its level up and over the model. A uniform flow will help minimize entrapped air. The liquid rubber should level off at least 1/2” (1.3 cm) over the highest point of the model surface.
Curing - Allow rubber to cure a minimum of 16-24 hours at room temperature (73°F/23°C) before demolding.
Using The Mold - If using as a mold material, a release agent should be applied to the mold before each casting.
Performance & Storage - Fully cured rubber is tough, durable and will perform if properly used and stored. The physical life of the rubber depends on how you use it.
Package of RTV 2 Liquid Polyurethane Rubber for Stamped Concrete Pool Deck Molds
20Kg/drum or 200Kg/drum.
Shelf life of RTV 2 Liquid Polyurethane Rubber for Stamped Concrete Pool Deck Molds
For best results, store products in unopened containers at room temperature (60-90°F/15-32°C). Use products within six months.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2010
Total Annual:
5000000-10000000
Employee Number:
50~80
Ecer Certification：
Verified Supplier
Mingcheng Group Limited was established in 2010 based in Dongguan,China, with brand MC Silicone for overseas market, dedicated to manufacturing and R&D of mold making and casting materials. Our professional approach to all our work, together with creative ideas and strong technical ... Mingcheng Group Limited was established in 2010 based in Dongguan,China, with brand MC Silicone for overseas market, dedicated to manufacturing and R&D of mold making and casting materials. Our professional approach to all our work, together with creative ideas and strong technical ...
Get in touch with us
Leave a Message, we will call you back quickly!