Shenzhen Silvercnc Tech Co., Ltd.
| Payment Terms | T/T, L/C |
| Supply Ability | 500 sets per month |
| Delivery Time | 5-7 work days |
| Packaging Details | cardboard |
| Contact diameter | Ø60mm |
| Surface finishing | Grinding 4s |
| Contact material | Tungsten carbide |
| Stroke | 12mm |
| Repeatability | 0.002(Recommended operating speed of 50 - 200mm/min) |
| Protective structure | IP67 |
| Contact force | 2.5N (Installation position: Vertical) |
| Cable | Oil resistant, standard 5 m (length can be customized)φ4.8 / 6 cores |
| Output mode | NC normally closed (an emergency stop when the signal broken ) |
| Contact rating | DC24V 20 mA resistive load |
| Brand Name | Silvercnc |
| Model Number | MK-T24E-60 |
| Place of Origin | CHINA |
| Certification | ISO9001 |
View Detail Information
Explore similar products
IP68 Tool Setter For Tool Length And Radius Detection
Length Measurement Repeatability 1 μM CNC Tool Setter
CNC Touch Probe For Tool Length / Break Detection
2.5N Contact CNC Tool Setter Normally Open
Product Specification
| Payment Terms | T/T, L/C | Supply Ability | 500 sets per month |
| Delivery Time | 5-7 work days | Packaging Details | cardboard |
| Contact diameter | Ø60mm | Surface finishing | Grinding 4s |
| Contact material | Tungsten carbide | Stroke | 12mm |
| Repeatability | 0.002(Recommended operating speed of 50 - 200mm/min) | Protective structure | IP67 |
| Contact force | 2.5N (Installation position: Vertical) | Cable | Oil resistant, standard 5 m (length can be customized)φ4.8 / 6 cores |
| Output mode | NC normally closed (an emergency stop when the signal broken ) | Contact rating | DC24V 20 mA resistive load |
| Brand Name | Silvercnc | Model Number | MK-T24E-60 |
| Place of Origin | CHINA | Certification | ISO9001 |
| High Light | MK-T24E-60 ，60mm Cnc Measuring Probe ，Contact NC Cnc Measuring Probe | ||
Contact NC Tool Probes measuring the tool length Realization of high-accuracy machining
The tool setting instrument are a high-precision switch (probe), a hard alloy tetrahedron (probe) with high hardness and wear resistance (probe), and a signal transmission connector (other parts omitted).The tetrahedral probe is used to contact the tool and transmit the force to the high-precision switch through the flexible support rod installed under it.The on and off signals sent by the switch are transmitted to the CNC system for tool direction identification, calculation, compensation, access and so on through the signal transmission connector
PRODUCT PARAMETERS
| Product name | MK-T24E-60 |
| Contact diameter | Ø60mm |
| Surface finishing | Grinding 4s |
| Contact material | Tungsten carbide |
| Contact structure | NC (Normally open) |
| Pretravel | 0.5mm |
| Stroke | 12mm |
| Repeatability | 0.002(Recommended operating speed of 50 - 200mm/min) |
| Contact life time | 3 million |
| Protective structure | IP67 |
| Contact force | 2.5N (Installation position: Vertical) |
| Cable | Oil resistant, standard 5 m (length can be customized)φ4.8 / 6 cores |
| LED lamp | Default : LED OFF / Operating : LED ON |
| Over travel signal (built-in microswitch) | |
| Output mode | NC normally closed (an emergency stop when the signal broken ) |
| Contact rating | DC24V 20 mA resistive load |
Tool setter function
1, The offset value of cutter was measured and compensated in the five directions of ±X, ±Z and Y axis.
2, Automatic monitoring, alarm and compensation for tool wear or damage during machining,
3, Compensation for the variation of tool bias caused by thermal deformation of machine tool.
Tool setter accuracy
The repeat precision of the tool setter is 1 m;Chuck 15 inches or less, arm rotation accuracy 5 m.Large size of chucks 18 "and above, up to 8 m repeatability.This precision can meet the needs of most users without trial cutting.
The use of the tool instrument can reduce the auxiliary time of the machine tool, reduce the rework and reject rate. If used together with the probe, the efficiency and machining accuracy of the machine tool can be significantly improved
Product dimessions
Product detail
Company Details
Business Type:
Manufacturer,Importer,Exporter,Trading Company
Year Established:
2013
Total Annual:
4million-7million
Employee Number:
20~50
Ecer Certification：
Active Member
Shenzhen Silvercnc Tech Co.,Ltd founded in 2013,which focus on CNC industry, providing the most suitable CNC machine and related accessories at the best price for our customers. The international trade officially started in 2019,providing products and servic... Shenzhen Silvercnc Tech Co.,Ltd founded in 2013,which focus on CNC industry, providing the most suitable CNC machine and related accessories at the best price for our customers. The international trade officially started in 2019,providing products and servic...
Get in touch with us
Leave a Message, we will call you back quickly!