Payment Terms | T/T, L/C, Western Union, MoneyGram |
Supply Ability | 10 Sets Per Month |
Delivery Time | 1 Month |
Packaging Details | Plywood |
Voltage Range | 75mV-15V25mV-5V |
Min. Discharge Voltage | 0V |
Cutoff Current | 0.2mA;12mA |
Current Range | 0.5mA~0.1A; 0.1A~6A |
Accuracy | ± 0.05% of FS |
Channels Per Unit | 8 |
Brand Name | Sinuo |
Model Number | SNBT4008NFA-5V6AS |
Certification | Calibration Certificate (Cost Additional) |
Place of Origin | China |
View Detail Information
Explore similar products
High Voltage High Current EV Power Battery Detection System for Automotive Large
15V/10A 30V/10A Primary Dry Batteries Capacity Test Equipment Charge Discharge
Charge Discharge Battery Testing Equipment Explosion Proof Safety Stainless
IEC 62133 Li-ion Battery and Cell Free Fall 1 M Pneumatic Drop Motor Lifting
Product Specification
Payment Terms | T/T, L/C, Western Union, MoneyGram | Supply Ability | 10 Sets Per Month |
Delivery Time | 1 Month | Packaging Details | Plywood |
Voltage Range | 75mV-15V25mV-5V | Min. Discharge Voltage | 0V |
Cutoff Current | 0.2mA;12mA | Current Range | 0.5mA~0.1A; 0.1A~6A |
Accuracy | ± 0.05% of FS | Channels Per Unit | 8 |
Brand Name | Sinuo | Model Number | SNBT4008NFA-5V6AS |
Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
High Light | high frequency vibration generator ,battery discharge analyzer |
5V 6A Lithium Ion Batteies and Cells Charge Discharge Life Cycle Dual Range Capacity Test Equipment
Overview:
This Li-ion battery charge discharge testing equipment meets the requirements of lithium oon battery and cell pulse charge and discharge test, DC internal resistance (DCIR) test, cycle life (Cycle Life) test, rate charge and discharge test. It has two current range: range 1: 0.5mA~0.1A; Range 2: 0.1A~6A, which can test the small capacity li-ion batteries and the test result are more accuracy.
This testing equipment comes with unique software, which can run on computer to achieve romote control and minitor.
This series of battery testing systems are widely used in various research institutions, universities and power battery manufacturers.
Standards & Clauses:
Conforms to IEC62133-1/-2:2017 clause 7.1, 7.2.1, 7.3.8, 7.3.9, IEC62133-1/-2:2012 clause8.1.1, 8.1.2, 8.2.1, 8.3.6, 8.3.7 IEC60086-4 clause 6.5.8 6.5.9 IEC60622, IEC60623, IEC 60086-1, IEC61951, IEC61960
Technical Parameters:
Project index | Parameter index | |
---|---|---|
Input Power | AC220V ±10% / 50Hz | |
resolution | AD: 16bit; DA: 16bit | |
Input Resistance | ≥1MΩ | |
Input Power | 425W | |
Channel Features | Constant Current Source and Constant Voltage Source with Independent pairs of Closed-loop Structure | |
Channel Control Mode | Independent Control | |
Voltage | Constant voltage control range | 25mV-5V |
Min Voltage Discharge | 0V(with cylinder spring clamp) | |
Accuracy | ± 0.05% of FS | |
Stability | ± 0.05% of FS | |
Current | Output of per channel | Range1: 0.5mA~0.1A; Range2: 0.1A~6A |
Accuracy | ± 0.05% of FS | |
Cut-off current of CV | Range1: 0.2mA; Range2: 12mA | |
Stability | ± 0.05% of FS | |
Power | Per Channel Output Power | 30W |
Stability | ± 0.1% of FS | |
Time | Rise Time | The Current 10%-90% Hardware Response Time is 1ms |
Step Time Range | Single Step Time Range≤365*24 h, Time Form Support 00:00:00.000(h, min, s, ms) | |
Data Recording | Record Condition | Time△t:100ms |
Voltage△U: 10mV | ||
Current△I:Range1:0.2mA; Range2:12mA | ||
Record Frequency | 10Hz | |
Charge | Charge Mode | Constant Current Charge, Constant Voltage Charge, Constant Current and Constant Voltage, ChargeConstant Power Charge |
End Conditon | Voltage, Current, Relative Time, Capacity, -△V | |
Discharge | Discharge Mode | Constant Current Discharge, Constant Power Discharge, Constant Resistance discharge |
End Condition | Voltage, Current, Relative Time, Capacity | |
Pulse | Charge | CCC, CPC |
Discharge | CCD, CPD | |
Minimum Pulse Width | 500ms | |
Pulse | 32 pulse setting in one step | |
Automated Switch | Automated switch from charge to discharge for each pulse | |
Cycle | Loop Measure Range | 1~65535 times |
Max Steps Per Loop | 254 | |
Nested Loop | Nested loop Function, Max Support 3 Layers | |
Protection | Software Protection |
|
| ||
Voltage and Current Testing Sample | 4-wire connecting | |
Noise | <85dB | |
Data Management | MYSQL Database | |
Communication Means | TCP/IP Protocol | |
Data Output | EXCEL,TXT | |
Communication Interface | Ethernet Port | |
Per Unit Main Channels No. | 8 | |
Dimensions | 3U, W*D*H: 480*330*130(mm) |
Equipment Working Environment:
Project index | Parameter index |
---|---|
Working Temperature Range | 0℃~40℃ |
Storage Temperature Range | 0℃~45℃ |
Working Environment Relative Humidity Range | 30% ~ 80% RH |
Storage Environment Relative Humidity Range | 30% ~ 90% RH |
The number of channels, voltage range, current range and etc. can be customized according client's specific requirements and specimen. Please email or call to Sinuo for further assistance.
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification:
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!