Sinuo Testing Equipment Co. , Limited
| Payment Terms | L/C, , T/T, Western Union, MoneyGram |
| Supply Ability | 20 sets per month |
| Delivery Time | 30 Days |
| Packaging Details | Plywood |
| Working Volume | 1000L |
| Air Velocity | ≤2m / s |
| Vacuum Pumping Speed | 0~30Kpa |
| Air Pressure | 0.5~1.0Mpa |
| Dust Concentration | 2～4kg/m³ |
| Control Method | PLC |
| Display Method | 7" touch screen |
| Timing Range | 0~99 hours 59 min59s |
| Brand Name | Sinuo |
| Model Number | SN441-1000L |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
Hand - Held Protection Against Water Jets IPX5 IPX6 6.3 Mm Or 12.5 Mm
IEC 60529 Wall Mounted IPX1 And IPX2 Vertical Drip Box Testing Equipment
IEC 60529 IPX8 Water Ingress Testing Equipment Continuous Immersion Stainless
IEC 60529 Hand Held IPX3 And IPX4 Spray Nozzle With Digital Flowmeter
Product Specification
| Payment Terms | L/C, , T/T, Western Union, MoneyGram | Supply Ability | 20 sets per month |
| Delivery Time | 30 Days | Packaging Details | Plywood |
| Working Volume | 1000L | Air Velocity | ≤2m / s |
| Vacuum Pumping Speed | 0~30Kpa | Air Pressure | 0.5~1.0Mpa |
| Dust Concentration | 2～4kg/m³ | Control Method | PLC |
| Display Method | 7" touch screen | Timing Range | 0~99 hours 59 min59s |
| Brand Name | Sinuo | Model Number | SN441-1000L |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | IP56 Dust Chamber ，IEC 60529 Dust Chamber ，4kg/m3 Dust Test Equipment | ||
IEC 60529 Figure 2 IP56 Dust Chamber IP Code Testing Equipment
Product information:
The test device is suitable for sealing parts and enclosure’s sand and dust resistance capacity testing of the electrical and electronic products, car and motorcycles spare parts and seals. In order to detect the use, storage, transport performance of the electrical and electronic products, car and motorcycles spare parts and seals under the sand and dust environment.
The test equipment uses intelligent and humanized PLC control system, the inner of the test equipment is made of high quality SUS304 stainless steel, the enclosure is A3 plate electrostatic spraying. And it also has large observation window and manual wiper device. The security protection is good.
The sand and dust test chamber is designed and manufactured according to IEC60529:2013 Figure 2, and required by IEC 60335-1 Clause 22.1, IEC60598-1-2008, and etc.
Technical Parameters:
| Model | SN4412-1000L | |
| Working size(mm) | L1000*W1000*H1000 | |
| Outer size (mm) | L1610*W1250*H1950 | |
| Main technical parameters | Temperature range | Room temperature |
| Test dust | dry talc which can go through the sieve of 75μm and the square sieve of wire diameter 50μm. | |
| Test sand (or talc) dosage | 2kg/m³
| |
| Vacuum pump | 0~30Kpa | |
| Air pressure | 0.5~1.0Mpa | |
| Sample rack height adjustment range
| 0~750MM
| |
| Timing range
| 0~99 hours 59 min | |
| Timing accuracy
| ±1min | |
| Load cycle control
| 0~99 hours 59 min | |
| Ash blowing cycle control
| 1s~9999 min | |
| Sand and dust concentration | 2～4kg/m3 | |
| Air flow speed | ≤2m/s | |
Application:
To verify the performance of the use, storage and transportation of electronic and electrical products, automobiles & motorcycle parts, seals and lamps in a dusty environment, to determine the possible harmful effects to the product by the particles carried by the air stream.
Test Principle:
There is a conical funnel with dust collection port at the bottom; the suction port of the high-pressure turbine circulation fan is installed at the dust extraction port (at the bottom), and the collected dust is sent to the top of the inner chamber and freely sprinkle from top to bottom.
It can simulate an open, dusty air environment condition induced by the natural environment or by human disturbances such as vehicle motion.
Samples and Restrictions:
Electrical and electronic products, automobiles & motorcycle parts, seals, lamps, etc.
Structure:
The machine adopts a closed chamber structure, a suspended man-machine interface operation device, a large visual window, the test circulates inside the cabinet. The inner chamber adopts a mirror panel and a special air duct design, which ensures to produce a standard concentration of laminar airflow in the chamber, there is a vacuum suction device is arranged.
The main structure includes outer chamber, inner chamber, dust suction port, dust recycling funnel, circulating dust blowing device, vacuum system, dust storage tank, flow valve, heating system, reverse flow blade, protective plug.
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!