Skymen Technology Corporation Limited
| Payment Terms | T/T |
| Supply Ability | 8000 pcs per month |
| Delivery Time | In Stock |
| Packaging Details | 1unit per carton / wooden case |
| Model | JP-1018I |
| Box Size | 406*305*100mm |
| Transducers | 18pcs |
| Ultrasonic Power | 900W |
| Timer | 0-30 minutes adjustable |
| Frequency | 28KHz / 40KHz |
| Material | SUS 304 |
| G.W | 10KG |
| Power Supply | AC 110V ; AC 220V |
| Generator | 1 unit |
| Connected Cable | Rigid/flexible Tube |
| Generator size | 270*440*150 |
| Brand Name | Skymen |
| Model Number | JP-1018I |
| Certification | SGS, FCC, CE, RoHS, ISO9001 |
| Place of Origin | China |
View Detail Information
Explore similar products
Ultrasonic Extraction Equipment Transducer Box SUS304 Hard Cr For Cleaning Mold
Skymen Submersible Transducer 1800W Generator For Cleaning Parts
40kHz Immersible Ultrasonic Transducer Box 1800W Waterproof Submersible
Skymen Ultrasonic Transducer SUS304 Generator Circuit Board Cleaning 22kHz
Product Specification
| Payment Terms | T/T | Supply Ability | 8000 pcs per month |
| Delivery Time | In Stock | Packaging Details | 1unit per carton / wooden case |
| Model | JP-1018I | Box Size | 406*305*100mm |
| Transducers | 18pcs | Ultrasonic Power | 900W |
| Timer | 0-30 minutes adjustable | Frequency | 28KHz / 40KHz |
| Material | SUS 304 | G.W | 10KG |
| Power Supply | AC 110V ; AC 220V | Generator | 1 unit |
| Connected Cable | Rigid/flexible Tube | Generator size | 270*440*150 |
| Brand Name | Skymen | Model Number | JP-1018I |
| Certification | SGS, FCC, CE, RoHS, ISO9001 | Place of Origin | China |
| High Light | ultrasonic generators and transducers ，submersible ultrasonic transducer | ||
Immersible Ultrasonic Transducers Plate/Box
Features:
JP-1006I product specification:
| Model | JP-1018I |
| Box Size | 406*305*100mm |
| Transducers | 18pcs |
| Ultrasonic Power | 900W |
| Frequency | 28KHz / 40KHz |
| G.W | 10KG |
Images of this model:
Medical and surgical instruments in a variety of sizes and complexity can pose challenges when it comes to cleaning, disinfecting and sterilizing them after use. An ultrasonic cleaner is an ideal tool for the first step in this three step process to protect medical personnel and patients from possible infection due to pathogens that remain on the instruments after a procedure.
Suggested Ultrasonic Cleaning Procedure
In all cases manufacturers’ instructions should be followed when using an ultrasonic cleaning process. These are representative steps.
Fill the ultrasonic cleaning tank with an approved medical instrument cleaning solution such as CLN-LR012 available from Tovatech following dilution instructions provided. Turn the cleaner on to start the degassing process. This step removes entrained air in new solutions that interferes with the efficiency of cavitation and takes approximately 10 minutes.
In the meantime:
At the end of the cycle, remove the instruments from the ultrasonic cleaning bath and thoroughly rinse them to remove all traces of the cleaning solution. Deionized water rinses will avoid spotting. If the instruments are not to be immediately disinfected and sterilized be certain that they are thoroughly dried and protected. Part reassembly can occur after sterilization.
Procedures should be in place to guide the replacement of used ultrasonic cleaning solutions. In some instances it is recommended that solution be drained and tanks thoroughly cleaned and dried after each ultrasonic cleaning cycle. Most solutions available today are biodegradable, which facilitates disposal but local authorities should be consulted on proper practices.
The ultrasonic cleaner uses ultrasonic waves (vibration) using water with detergents or enzymatic products to break up soil and organic material on medical instruments/devices. These devices are rinsed then autoclaved (sterilized). The autoclave sterilizer uses heat, steam, and pressure to kill all pathogenic microorganisms and their spores.
Package Includes:
1 x Ultrasonic Transducers Plate
1 x Generator
1 x Manual
Clean effect:
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2007
Total Annual:
7,000,000-10,000,000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Skymen Technology Corporation Limited, which is a leading manufacturer and national high-tech enterprise, was founded in 2007. There are 2 factories of Skymen, one is located in Shenzhen, closed to HongKong. And the other is located in Shaoguan, Guangdong province, China. ... Skymen Technology Corporation Limited, which is a leading manufacturer and national high-tech enterprise, was founded in 2007. There are 2 factories of Skymen, one is located in Shenzhen, closed to HongKong. And the other is located in Shaoguan, Guangdong province, China. ...
Get in touch with us
Leave a Message, we will call you back quickly!