SHENZHEN XISHEN DEVELOPMENT COMPANLY LIMITED
| Payment Terms | T/T, Western Union，Paypal,L/C |
| Supply Ability | 50000pcs/month |
| Delivery Time | 5-35days |
| Packaging Details | 1pcs/gift box, 30~50pcs/ctn |
| product name | Best Clamp Meter For Electrician |
| Mode | CHX-CM008A |
| Display | LCD |
| AC Current range | 400A |
| Resolution | 0.1A |
| Accuracy | ±(2.5% + 10) |
| Frequency | 45Hz ~65Hz |
| Ambient temperature | 23 ± 5 ℃ |
| Brand Name | CHX |
| Model Number | CHX-CM008A |
| Certification | CE, RoHS |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
600V 750V Digital Clamp Multimeter 9.999Hz 99.99Hz With LCD Display
60A 0.01A Digital Clamp Tester , 400A AC DC Clamp On Amp Meter
400A AC Digital Clamp Multimeter Voltage Tester 1999 Display 190g
Data Keep Clamp On Digital Multimeter 190g 10MW 184.0×66.0×32.5mm
Product Specification
| Payment Terms | T/T, Western Union，Paypal,L/C | Supply Ability | 50000pcs/month |
| Delivery Time | 5-35days | Packaging Details | 1pcs/gift box, 30~50pcs/ctn |
| product name | Best Clamp Meter For Electrician | Mode | CHX-CM008A |
| Display | LCD | AC Current range | 400A |
| Resolution | 0.1A | Accuracy | ±(2.5% + 10) |
| Frequency | 45Hz ~65Hz | Ambient temperature | 23 ± 5 ℃ |
| Brand Name | CHX | Model Number | CHX-CM008A |
| Certification | CE, RoHS | Place of Origin | CHINA |
| High Light | 0.5VV DC Ampere Clamp Meter ，45Hz Digital Clamp Ampere Meter ，65Hz Ampere Clamp Meter | ||
0.5VV DC 45Hz ~ 65Hz Digital Clamp Infrared Themometer
3.2 Technical indicators
Environment temperature:23±5℃ Relative humidity:<75%
3.2.1 AC Current
| Range | Resolution | Accuracy |
| 6A | 0.001A | ±(3.0% + 20) |
| 60A | 0.01A | ±(2.5% + 8) |
| 400A | 0.1A | ±(2.5% + 10) |
- Min input current:0.02A AC
- Max input:400A AC
- Frequency:45Hz ~65Hz
- When ac current is measured, the meter automatically opens an internal low-pass filter to filter out high-frequency current.
3.2.2 DC voltage
| Range | Resolution | Accuracy |
| 6V | 0.001V | ±(0.5% + 3) |
| 60V | 0.01V | |
| 600V | 0.1V | ±(0.8% + 5) |
- Min/ input voltage:0.5VV DC
- Input impedance:10MW
- Maximum/ input voltage:600V AC (Effective value)OR 600V DC
3.2.4 AC voltage
| Range | Resolution | Accuracy |
| 6V | 0.001V |
±(1.0% + 5) |
| 60V | 0.01V | |
| 600V | 0.1V | ±(1.2% + 5) |
- Min/ input voltage:1.0V DC
- Input impedance:10MW
- Maximum/ input voltage:600V AC (Effective value)or 600V DC
- Frequency range:45Hz ~65Hz
3.2.5 Frequency
3.2.5.1 Through the V file:
| Range | Resolution | Accuracy |
| 60.0Hz | 0.1Hz | ±(1.0% + 5) |
| 1000Hz | 1Hz |
- Range:40Hz ~ 1000Hz
- Input range:≥ 0.2A AC(Effective value)
3.2.5.2 Through A File (From Clamp)
| Range | Resolution | Accuracy |
| 60.0Hz | 0.1Hz | ±(1.0% + 5) |
| 1000Hz | 1Hz |
- Range:40Hz ~ 1000Hz
- Input range:≥ 1.0V AC(Effective value)
3.2.6 Resistance
| Range | Resolution | Accuracy |
| 6kW | 0.001kW | ±(0.8% + 3) |
| 60kW | 0.01kW | |
| 600kW | 0.1kW | |
| 6MW | 0.001MW | ±(1.2% + 3) |
| 10MW | 0.1MW |
- Overload protection: 600V DC or AC(Effective value)
Current measurement
1) Hold the trigger, open the pliers, and clamp a wire of the circuit under test in the pliers.
2) When the measured signal is greater than or equal to 0.02A, the main screen of the instrument will display the measured current value, and the secondary screen will display the frequency value of the current (note: the meter will only display the frequency value if the current is greater than or equal to 0.02A)
Noted
1) The correct measurement results cannot be obtained by clamping two or more wires of the circuit under test at the same time.
2) In order to obtain accurate readings, the conductor under test should be placed as far as possible in the center of the current clamp.
3) Represents the maximum input ac current of 400 A.
4) Please hold the clamp head when the current measurement machine to open the clamp head and nose pliers head clip conductor under test, and then slowly let go of the trigger, until the clamp head closed completely, please be sure to test whether the conductor is picking up in the middle of the tong head, not in the tong head center will produce additional error, clamp table can only measure electrical conductor, a conductor if two or more current is measured at the same time, the measuring reading will be wrong.
Company Details
Business Type:
Manufacturer
Year Established:
2010
Total Annual:
3000000-8000000
Employee Number:
80~100
Ecer Certification：
Active Member
Shenzhen Xishen Development Co.,LTD,business mogel for testing instruments for more than 10 years.Our engineers have been in this industry for over 20 years and served some of the most famous customers from all over the world.We can provide below services for all our partners in this ... Shenzhen Xishen Development Co.,LTD,business mogel for testing instruments for more than 10 years.Our engineers have been in this industry for over 20 years and served some of the most famous customers from all over the world.We can provide below services for all our partners in this ...
Get in touch with us
Leave a Message, we will call you back quickly!