hanse-john electronic Co.,Ltd.
| Payment Terms | paypal, Western Union, MoneyGram |
| Supply Ability | 1000000pcs PER YEAR |
| Delivery Time | 35 day |
| Packaging Details | REEL |
| Oscillation Frequency Fosc (MHz) | 10.00Mhz |
| Frequency Accuracy (%) | ±0.5 max |
| Resonant Impedance Ro (Ω) | 40 max |
| Temperature Coefficient of Oscillation Frequency (%) max. | ±0.3 (Oscillation Frequency drift，-25℃～+85℃) |
| Oscillation Frequency Aging Rate（10years） (%) max | ±0.2 (From initial value) |
| Withstanding Voltage (V) | 50 (DC，1min) |
| Insulation Resistance Ri,（MΩ）min. | 500 （10V，1min） |
| Temperature Stability （－20℃～ +80℃ ） | ±0.5% max (-25℃ ～ +80℃) |
| Rating Voltage UR（V） | 15V p-p |
| Operating Temperature | -25℃ ～ +85℃ |
| Storage Temperature | -55℃ ～ +85℃ |
| Insulation Resistance(DC 25V 1 minute) | 100MΩ min |
| Input/Output Impedance | 330 Ω |
| Brand Name | HM |
| Model Number | ceramic resonator 10.00Mhz ZTTCE10.00MG50HD0-R0 |
| Certification | Rohs，ISO |
| Place of Origin | wuxi |
View Detail Information
Explore similar products
SMD 100ohm 5.0mm ZTB1024Y 1024kHz Ceramic Resonator
ISO 0.455Mhz Quartz Crystal Resonators And Oscillators
CRB455E ZTB455E 455Khz 50V 280PF Ceramic Resonator
Oscillator ZTA ZTT 5V 2.0M Ceramic Resonator
Product Specification
| Payment Terms | paypal, Western Union, MoneyGram | Supply Ability | 1000000pcs PER YEAR |
| Delivery Time | 35 day | Packaging Details | REEL |
| Oscillation Frequency Fosc (MHz) | 10.00Mhz | Frequency Accuracy (%) | ±0.5 max |
| Resonant Impedance Ro (Ω) | 40 max | Temperature Coefficient of Oscillation Frequency (%) max. | ±0.3 (Oscillation Frequency drift，-25℃～+85℃) |
| Oscillation Frequency Aging Rate（10years） (%) max | ±0.2 (From initial value) | Withstanding Voltage (V) | 50 (DC，1min) |
| Insulation Resistance Ri,（MΩ）min. | 500 （10V，1min） | Temperature Stability （－20℃～ +80℃ ） | ±0.5% max (-25℃ ～ +80℃) |
| Rating Voltage UR（V） | 15V p-p | Operating Temperature | -25℃ ～ +85℃ |
| Storage Temperature | -55℃ ～ +85℃ | Insulation Resistance(DC 25V 1 minute) | 100MΩ min |
| Input/Output Impedance | 330 Ω | Brand Name | HM |
| Model Number | ceramic resonator 10.00Mhz ZTTCE10.00MG50HD0-R0 | Certification | Rohs，ISO |
| Place of Origin | wuxi | ||
| High Light | ZTTCE Crystals And Resonators ，10.00Mhz Crystals And Resonators ，10.00Mhz Ceramic Resonator Filter | ||
| NO. | Components | Materials |
| 1 | Outer Electrodes | Top and Bottom ElectrodesAg+Ni(under plating)+Sn(over plating) Side ElectrodesNi+Cu+Ag(under plating)+Sn(over plating) |
| 2 | Ceramic Box | Insulation Box |
| 3 | Cover | Dielectric Material |
| 4 | Glue | Epoxy Resin |
| 5 | Conductive Adhesive | Ag+Epoxy Resin |
| 6 | Base | Dielectric Material |
| 7 | Ceramic Element | Piezoelectric Ceramics (PZT) |
4．ELECTRICAL SPECIFICATIONS
4.1 RATING
| Items | Requirement |
| Withstanding Voltage (V) | 50 (DC,1min) |
| Insulation Resistance Ri,(MΩ)min. | 500 (10V,1min) |
| Operating temperature | -25℃～＋85℃ |
| Storage temperature | -55℃～＋85℃ |
| Rating Voltage UR(V) | 6V DC |
| 15V p-p |
4.2 ELECTRICAL SPECIFICATIONS
| Items | Requirement |
| Oscillation Frequency Fosc (MHz) | 10.000 |
| Frequency Accuracy (%) | ±0.5 |
| Resonant Impedance Ro (Ω)max. | 40 |
Temperature Coefficient of OscillationFrequency (%) max. | ±0.3 (Oscillation Frequency drift,-25℃～+85℃) |
| Oscillation Frequency Aging Rate(10years) (%) max | ±0.2 (From initial value) |
*Components shall be left in a chamber of +85±2℃ for 1000 hours, then measured after leaving in natural condition for 1 hour.
5．TEST
5.1 Test Conditions
Parts shall be tested under the condition ( Temp.:20±15℃,Humidity :65±20%
R.H.) unless the standard condition(Temp.:25±3℃,Humidity :65±10% R.H.)
is regulated to measure.
| No | Item | Condition of Test | Performance Requirements | |
| 6.1 | Humidity | Keep the resonator at 40℃±2℃ and 90%-95% RH for 96h. Then Release the resonator into the room Condition for 1h prior to the Measurement. | It shall fulfill the specifications in Table 1. | |
| 6.2 | High Temperature Exposure | Subject the resonator to 85±2℃ for 96h, then release the resonator into the room conditions for 1h prior to the measurement. | It shall fulfill the specifications in Table 1. | |
| 6.3 | Low Temperature Exposure | Subject the resonator to -55±2℃ for 96h, then release the resonator into the room conditions for 1h prior to the measurement. | It shall fulfill the specifications in Table 1. | |
| 6.4 | Temperature Cycling | After temperature cycling of blow table was performed 5 times, resonator shall be measured after being placed in natural conditions for 1h. | It shall fulfill the specifications in Table 1. | |
| Temperature | Time | |||
| –25±3℃ | 30±3 min | |||
| 85±3℃ | 30±3 min | |||
| 6.5 | Vibration | Subject the resonator to vibration for 2h each in x,y and z axis With the amplitude of 1.5mm, the frequency shall be varied uniformly between the limits of 10 Hz—55Hz. | It shall fulfill the specifications in Table 1. | |
| 6.6 | Mechanical Shock | Drop the resonator randomly onto a wooden floor from the height of 100cm 3 times. | It shall fulfill the specifications in Table 1. | |
| 6.7
| Soldering Test | Passed through the re-flow oven under the following condition and left at room temperature for 1h before measurement. | It shall fulfill the specifications in Table 1. | |
| ||||
Table 1
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
2008
Total Annual:
400000-1000000
Employee Number:
100~200
Ecer Certification：
Active Member
The company’s main products are frequency components (piezoelectric ceramics, crystals, surface acoustic waves), functional ceramic products The company was established in 2008, develops and produces frequency components. Our products are manufactured in accordance with the ISO9002 stand... The company’s main products are frequency components (piezoelectric ceramics, crystals, surface acoustic waves), functional ceramic products The company was established in 2008, develops and produces frequency components. Our products are manufactured in accordance with the ISO9002 stand...
Get in touch with us
Leave a Message, we will call you back quickly!