30000rpm CSD Precision Ceramic Spray Dry Machine

Product Specification

CSD series precision ceramic spray dryer

General description

• Spray drying process can be used almost all the liquid pumping a continuous process for the free flow of powder. Working principle is that in the drying chamber will be expected to disperse into the liquid through the atomizer mist droplets, and then heated with hot air of these droplet method of access to products, the entire process without manual handling.
• CSD Series spray dryer is a new generation dedicated dryer. Is our technical staff in the LPG Models based on technological innovations introduced by the upgrading of products. This machine has a small footprint, simple operation, reliable features, and can prepare good sphericity, particle size distribution of powder, so can significantly improve the density and pressure products.
• CSD Series models and practical advantages for the production of fine ceramics and scientific research units to provide the necessary conditions for new materials. Currently, we have zirconia, alumina, zinc oxide, PTC, silicon carbide, silicon nitride, lithium battery materials, etc.Successful application.

Adoption of new M-type atomizer

The atomizer has the following characteristics:

● High speed Electric rotary atomizer, maximum revolving speed 30,000rpm:

① Can get free-flowing powder

② Can get uniformly-distributed particle size

③ Attachment decreasing in tangent line.

④ Particle size is adjustable by changing atomization wheel rotating speed or compressed air pressure.

● Low-cap-type exhaust structure designed to ensure that most of the powders were collected at the bottom of the drying tower, only a small amount of powder into the Cyclone Separator or bag filter, as can greatly reduces the pressure in the gas-solid separation process of the downstream dust collector.

● The heating system uses non-oxidizing heating pipe fittings. The air entering the drying room is all filtered through 3-stage filtration including primary, intermediate and high-temperature high-efficiency filter, and the purification level reaches more than one hundred thousand grade. External impurities are prevented from being mixed into the product to affect the post-processing procedures such as molding and sintering of the product.

● The novel pulse dust collector is specially made of a new generation of advanced laminating material from DuPont (USA). This corrugated filter element has the characteristics of large filtering area, convenient cleaning, strong reusability, good antistatic effect, and high temperature resistance. At the same time, it has a significant recovery efficiency for the recovery of fine powder.

● The powder-extraction pipeline adopts quick-installed sanitary pipe fittings (the inner and outer walls of the pipe fittings are all mirror -polished to prevent powder accumulation in the pipeline). The drying room is equipped with manholes for cleaning and observation and climbing ladders for easy disassembly, cleaning, and product replacement.

● Two fluid nozzle, Located in both chamber ceiling centre and cone side of chamber. Can handle high density or viscosity feeds.

● Shock base on the cone is used to avoid wall deposit.

● Fresh air will be heated by electric heater, and cleaned by air filter(F4,F9,H13)

● High-efficiency cyclone: yielding is about 98% for ≥5μpowder.

● Drying chamber design includes manhole, Powder pipeline adopts sanitary tubes

and clamps for easy maintain and cleaning.

● Automation: adopts Siemens S7-1200 with 12’ A color touch screen.

• Reliable interlock can avoid mal-operation.
• Inlet air temperature indicate, control, alarm, recorder(TICAR);
• Outlet air temperature indicate, control, alarm, recorder(TICAR);
• Recipe parameter modification/saving in menu(for various materials)
• Rotary atomizer speed frequency control;
• Two fluid nozzle controlled by compressed air;
• Exhaust fan controlled by converter
• Outlet temperature interacted with feed speed;
• Chamber pressure indicating, difference pressure indicating for high efficient air filter, cyclone and bagfilter etc.
• Inlet temperature controlled by SSR, deviation within ±1℃.

Automation:

Inlet air temperature indicate, control, alarm (TICA)

Outlet air temperature indicate, control, alarm (TICA)

● Reliable interlock can avoid mal-operation

● Temperature digital-display, alarm during high/low temperature;

● Interlock with electric heater, and other interlock for system protection.

● Safety switch mounted on heating element.

● Outlet temperature interacted with feed speed；

● Inlet temperature controlled by SSR, deviation within ±1℃

● Chamber pressure indicating, difference pressure indicating for high efficient air filter, cyclone and bag filter etc.

Photos of CSD series precision ceramic spray dryer taken at the client site----LT METAL CO., LTD.:

4 sets of CSD-35-R precision ceramic spray dryers for ITO towers delivered to User’s site

Product collection system

Piping systems

4 sets of CSD-35-R precision ceramic spray dryers for ITO towers installed in whole line

Feed preparation/supply systems

Semi-finished products of CSD series precision ceramic spray dryer

Technical parameters :

※ The amount of water evaporation is based on the hot air inlet temperature of 250°C and the outlet temperature of 100°C.

※ The following are some kinds of commonly used ceramic spray drying machine for you to choose from, you can also make some related improvements on the base of various types:

CSD series precision ceramic spray dryer after-installation

Optional Choice:

◆ This kind of complete equipment is manufactured based on customized design. Not all functional features provide all designs. The actual configuration should be made in accordance with the contract or signed agreement.

◆ For the main electrical components, we have international brand choices such as ABB,Siemens or Schneider or others

◆ For the material for the machine, we have choices on AISISUS304, AISISUS304L, AISISUS316,AISISUS316L,carbon steel and so on.

◆ For the control system, we have choices on push button, PLC+HMI and so on. We can design the control system as needed.

◆ We can design the explosion-proof system for our spray dryer based on customer’s request.

◆ For the fitting system for the spray dryer, we can supply it, such as feeding

system, pneumatic conveying system and so on.

◆ For the heating system for the plant, it is very flexible. we can configure.

it based on the customer’s site conditions, such as steam,electricity, gas furnace and so on, all of them we can design it to match our spray dryer.

◆ If without heating system, it can as a cooler to make particles with cooling air.

◆ Complete and professional R&D equipment, scientific and reasonable product testing services, extensive and in-depth production technology exchanges, research and exploration service platforms:

The XKIANDAO company can provide customers with various process tests and test verification services in a series of laboratories such as YPG, LPG, PSD, BYP, PFSD, etc., and small pilot scales or even a small number of production-type test units. These plants have verified the feasibility of the technical application of many series of leveling, determine the best production process conditions, and provide samples for market analysis.

Notices before order:

◆ Name and physical properties of feed: solid content (or water content), viscosity, surface tension, PH value.

◆ The powder capacity after drying, allowable residual water content, particle size, allowable temperature.

◆ Production, daily working hours/shift.

◆ Available energy: steam pressure available, electric capacity, coal, oil, gas available.

◆ Control requirements: whether the inlet and outlet temperatures need to be controlled automatically.

◆ Powder collection requirements: whether to install a bag trap, and the environmental requires on exhaust gas.

◆ Other special requirements.

Paid testing service:

We welcome new and old customers to fully respond to the public, comprehensive and professional questionnaire---based on User Requirements Specification (URS), launched by our company's sales department during the preparation period for market research.

The company can design it for you on the basis of users' different material characteristics, different heating modes, different control requirements, different output demands, different product conditions, different workshop dispositions, different clean-in-place requirements(CIP), etc., so as to meet the requirements of different users.

All kinds of experimental machines are equipped in the company for the test of users to confirm the drying characteristics. You are welcomed to come to our company for testing.