Jiangsu milky way steel poles co.,ltd
| Payment Terms | T/T, L/C at sight |
| Supply Ability | 300pcs per day |
| Delivery Time | 20 working days after received your payment |
| Packaging Details | As customer request |
| Product Name | Electric Steel Power Pole |
| Application | Distribution Line |
| Material | SteelQ235,Q345 |
| Minimum yield strength | 355 mpa |
| Max ultimate tensile strength | 620 mpa |
| Wall thickness | 1mm-36mm |
| Brand Name | MilkyWay |
| Model Number | Electric Steel Power Pole |
| Certification | ISO9001/BV/ |
| Place of Origin | China |
View Detail Information
Explore similar products
Polygonal Electrical Power Pole Steel Utility Poles 50 Years Life Time
Conical Distribution 1mm Electrical Power Pole
10m 5KN Galvanized Steel Power Pole For Electrical Transmission Power Line
18m 240kv Metal Transmission Line Electrical Power Pole For Steel Pole Tower
Product Specification
| Payment Terms | T/T, L/C at sight | Supply Ability | 300pcs per day |
| Delivery Time | 20 working days after received your payment | Packaging Details | As customer request |
| Product Name | Electric Steel Power Pole | Application | Distribution Line |
| Material | SteelQ235,Q345 | Minimum yield strength | 355 mpa |
| Max ultimate tensile strength | 620 mpa | Wall thickness | 1mm-36mm |
| Brand Name | MilkyWay | Model Number | Electric Steel Power Pole |
| Certification | ISO9001/BV/ | Place of Origin | China |
| High Light | electric power pole ，steel power pole | ||
High Voltage Outdoor Electric Steel Power Pole for Distribution Line
Steel
The material is in accordance with NF EN 10025
Standard and NF EN 10149 Standard,it has the following property.
-Yield Strength=355N/mm2
-Toughness remains the same under 20 degrees below zero.
-Galvanization is in accordance with NFA35503 Standard Class 1.
Specification:
| Height | From 9 meter to 100 meter |
| Suit for | Electric Power Transmission and Distribution |
| Shape | Polygonal or Conical |
| Material | Normally Q345B/A572, Minimum Yield Strength ≥ 345 N/mm² Q235B/A36, Minimum Yield Strength ≥ 235 N/mm² As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400 |
| Power Capacity | 10kV to 220kV |
| Tolerance of the dimension | According to client’s requirement. |
| Surface treatment | Hot dip galvanized Following ASTM A 123, or any other standard by client required. |
| Joint of Poles | Slip joint, flanged connected |
| Standard | ISO 9001:2008 |
| Length of per section | Within 14 meter once forming |
| Welding Standard | AWS (American Welding Society ) D 1.1 |
| Thickness | 1 mm to 36mm |
| Production Process | Raw material test → Cutting →bending →Welding (longitudinal )→Dimension verify →Flange welding →Hole drilling →sample assemble → surface clean→ Galvanization or powder coating ,painting →Recalibration →Packages |
| Packages | Packing with plastic paper or according to client’s request. |
Galvanization
Standard:NFA91121
Average thickness of the galvanization:Not less than 86μm.
Manufacture Tolerance
-Component Length:-25mm to 75mm
-Straightness:2mm/m
-Twisting degree:1°per 3 meters length
-Ovalisation:Maximum is 3%
-The average diameter:+/-0.5%
-Slip length:+/-150mm
Installation
-Remove all the equipment on the pole during Assembly.
-Circle a sling around th epole shaft of each section.
-Fix the sling on top section to one pulley block.
-The sling on the bottom section is tightly fixed and fixed at the center of gravity.
-Make the steel pole vertical by tighten the sling of the top section.
-Fix the steel pole.
-Remove the sling.
Company Introduction:
Jiangsu Milky Way Steel Poles which established on 1991 is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port .
Our Company has 24 years experience on producing the steel poles including the transmission power pole,street light pole,high mast pole and so on.
We exported to oversea countries since 1991 and our products have been delivered to more than 70 countries and areas ,including America,Australia ,Russia ,Germany ,Span,Philippines ,Malaysia,Africa and so on.
We are the supplier of many big project in many countries,like the street light pole of Dubai Tower.the high mast pole for Sochi Winter Olympic Game and so on.
Company Details
Business Type:
Manufacturer,Exporter,Trading Company
Year Established:
1989
Employee Number:
100~500
Ecer Certification：
Verified Supplier
Estbilsed in 1989,Jiangsu Milky Way Steel Poles is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port . Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on We have p... Estbilsed in 1989,Jiangsu Milky Way Steel Poles is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port . Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on We have p...
Get in touch with us
Leave a Message, we will call you back quickly!